Order this document by MC1403/D A precision band-gap voltage reference designed for critical instrumentation and D/A converter applications. This unit is designed to work with D/A converters, up to 12 bits in accuracy, or as a reference for power supply applications. * Output Voltage: 2.5 V 25 mV * * * * * * * PRECISION LOW VOLTAGE REFERENCE SEMICONDUCTOR TECHNICAL DATA " Input Voltage Range: 4.5 V to 40 V Quiescent Current: 1.2 mA Typical P1 SUFFIX PLASTIC PACKAGE CASE 626 Output Current: 10 mA Temperature Coefficient: 10 ppm/C Typical 8 1 Guaranteed Temperature Drift Specification D SUFFIX PLASTIC PACKAGE CASE 751 (SO-8) Equivalent to AD580 8 Standard 8-Pin DIP, and 8-Pin SOIC Package 1 Typical Applications * * * * Voltage Reference for 8 to 12 Bit D/A Converters PIN CONNECTIONS Low TC Zener Replacement Vin 1 8 NC Vout 2 7 NC Gnd 3 6 NC NC 4 5 NC High Stability Current Reference Voltmeter System Reference MAXIMUM RATINGS (TA = 25C, unless otherwise noted.) Symbol Value Unit VI 40 V Storage Temperature Tstg - 65 to 150 C Junction Temperature TJ +175 C Operating Ambient Temperature Range MC1403B MC1403 TA Rating Input Voltage C C - 40 to +85 0 to + 70 ORDERING INFORMATION Device MC1403D MC1403P1 MC1403BD MC1403BP1 Operating Temperature Range TA = 0 to +70C TA = - 40 to +85C Package SO-8 Plastic DIP SO-8 Plastic DIP Figure 1. A Reference for Monolithic D/A Converters + 5.0 V 1 MC1403 3 2 2.5 V Full Scale Adjust 500 1.0 k R1 R2 Reference Amplifier IRef *0.1 F C1 Providing the Reference Current for Motorola Monolithic D/A Converters The MC1403 makes an ideal reference for many monolithic D/A converters, requiring a stable current reference of nominally 2.0 mA. This can be easily obtained from the MC1403 with the addition of a series resistor, R1. A variable resistor, R2, is recommended to provide means for full- scale adjust on the D/A converter. 1.2 k R3 * Caution: System stability may be affected if output capacitance * exceeds 1.0 F. Using higher capacitance values is not * recommended and should be carefully considered. The resistor R3 improves temperature performance by matching the impedance on both inputs of the D/A reference amplifier. The capacitor decouples any noise present on the reference line. It is essential if the D/A converter is located any appreciable distance from the reference. A single MC1403 reference can provide the required current input for up to five of the monolithic D/A converters. Motorola, Inc. 1996 MOTOROLA ANALOG IC DEVICE DATA Monolithic D/A Converter Rev 1 1 MC1403, B ELECTRICAL CHARACTERISTICS (Vin = 15 V, TA = 25C, unless otherwise noted.) Characteristic Output Voltage (IO = 0 mA) Temperature Coefficient of Output Voltage* MC1403 Symbol Min Typ Max Unit Vout 2.475 2.5 2.525 V VO/T - 10 40 ppm/C VO Output Voltage Change* (Over specified temperature range) MC1403B 0 to + 70C MC1403B - 40 to + 85C mV - - - - 7.0 12.5 - - 1.2 0.6 4.5 3.0 Line Regulation (IO = 0 mA) (15 V VI 40 V) (4.5 V VI 15 V) Regline Load Regulation (0 mA < IO < 10 mA) Regload - - 10 mV IQ - 1.2 1.5 mA Quiescent Current (IO = 0 mA) mV * This test is not applicable to the MC1403D or MC1403BD surface mount devices. Figure 2. MC1403, B Schematic Vin 2.0 k 2.0 k 2.0 k 2.0 k 1.0 k 32 Vout 1.5 k C1 30 pF 1.73 k 2.37 k 10 k 1.483 k 1.0 k 5.61 k This device contains 15 active transistors. 2 MOTOROLA ANALOG IC DEVICE DATA MC1403, B Figure 4. Change in Output Voltage versus Load Current Figure 3. Typical Change in Vout versus Vin (Normalized to Vout @ Vin = 15 V, Iout = 0 mA) Vout , CHANGE IN OUTPUT VOLTAGE (mV) (Normalized to Vin = 15 V @ TC = 25C) Vout , CHANGE IN Vout (mV) 2.0 1.0 25C 0 -1.0 0C -2.0 75C -3.0 -4.0 -5.0 -6.0 0 10 20 30 Vin, INPUT VOLTAGE (V) 40 10 9.0 8.0 7.0 6.0 5.0 4.0 75C 3.0 2.0 0C 1.0 0 50 25C 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Iout, OUTPUT CURRENT (mA) 8.0 9.0 10 Figure 5. Quiescent Current versus Temperature Figure 6. Change in Vout versus Temperature (Vin = 15 V, Iout = 0 mA) (Normalized to Vout @ Vin = 15 V) 1.20 Vout , CHANGE IN Vout (mV) I1, QUIESCENT CURRENT (mA) 1.25 1.15 1.10 1.05 1.00 0.95 0.90 0 -40 -30 -20 -10 Iout = 2 mA Vin = 15 V 0 -2.0 Vin = 5.0 V -4.0 -6.0 -8.0 -10 -12 0 10 20 30 40 50 TA, TEMPERATURE (C) 60 70 -14 -40 -30 -20 -10 80 85 0 10 20 30 40 50 TA, TEMPERATURE (C) 60 70 80 85 Figure 7. Change in Vout versus Temperature (Normalized to TA = 25C, Vin = 15 V, Iout = 0 mA) Vout , CHANGE IN Vout (mV) 4.0 2.0 IO = 0 mA = 2.0 mA 0 -2.0 = 8.0 mA -4.0 = 5.0 mA -6.0 -8.0 -10 -12 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 85 TA, TEMPERATURE (C) MOTOROLA ANALOG IC DEVICE DATA 3 MC1403, B done by dividing the EOC pulse rate by 2 with 1/2 MC14013B flip-flop and blanking the display using the blanking input of the MC14543B. The display uses an LED display with common anode digit lines driven with an MC14543B decoder and an MC1413 LED driver. The MC1413 contains 7 Darlington transistor drivers and resistors to drive the segments of the display. The digit drive is provided by four MPS-A12 Darlington transistors operating in an emitter-follower configuration. The MC14543B, MC14013B and LED displays are referenced to VEE via Pin 13 of the MC14433. This places the full power supply voltage across the display. The current for the display may be adjusted by the value of the segment resistors shown as 150 in Figure 8. 3-1/2-Digit Voltmeter - Common Anode Displays, Flashing Overrange An example of a 3-1/2-digit voltmeter using the MC14433 is shown in the circuit diagram of Figure 8. The reference voltage for the system uses an MC1403 2.5 V reference IC. The full scale potentiometer can calibrate for a full scale of 199.9 mV or 1.999 V. When switching from 2.0 V to 200 mV operation, RI is also changed, as shown on the diagram. When using RC equal to 300 k, the clock frequency for the system is about 66 kHz. The resulting conversion time is approximately 250 ms. When the input is overrange, the display flashes on and off. The flashing rate is one-half the conversion rate. This is Figure 8. 3-1/2-Digit Voltmeter MC1403 20 k 2 -5.0 V 0.1 F +5.0 V 3 0.1 F 300 k RC 11 10 VX 2 MC14433 0.1 F ** 13 7 8 0.1 F 4 1 2 3 5 23 22 21 20 4 5 6 +5.0 V 0.1 F 12 24 3 1 RI * +5.0 V 0.1 F -5.0 V 6 8 9 14 Segment Resistors 150 (7) 16 9 7 6 5 4 3 2 1 10 11 12 13 14 15 7 -5.0 V MC1413 1 MC14543B +5.0 V -5.0 V Minus Sign -5.0 V 15 19 18 17 16 -5.0 V 6 DS2 5 DS3 3 DS4 D C S R Q Q 1 2 51 k MC14013B 4 +5.0 V 8 9 D S Q 13 11 C Q 12 R 14 7 10 * RI = 470 k for 2.0 V Range RI = 27 k for 200 mV Range ** Mylar Capacitor -5.0 V 4 f g e d c b a 200 MPS-A12 Plus Sign 110 5.0 V DS1 10 11 12 13 14 15 16 50 F Common Anode LED Display 0.1 F -5.0 V MPS-A12 (4) +5.0 V MOTOROLA ANALOG IC DEVICE DATA MC1403, B OUTLINE DIMENSIONS P1 SUFFIX PLASTIC PACKAGE CASE 626-05 ISSUE K 8 5 NOTES: 1. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 2. PACKAGE CONTOUR OPTIONAL (ROUND OR SQUARE CORNERS). 3. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. -B- 1 4 F DIM A B C D F G H J K L M N -A- NOTE 2 L C J -T- N SEATING PLANE D M K MILLIMETERS MIN MAX 9.40 10.16 6.10 6.60 3.94 4.45 0.38 0.51 1.02 1.78 2.54 BSC 0.76 1.27 0.20 0.30 2.92 3.43 7.62 BSC --- 10_ 0.76 1.01 INCHES MIN MAX 0.370 0.400 0.240 0.260 0.155 0.175 0.015 0.020 0.040 0.070 0.100 BSC 0.030 0.050 0.008 0.012 0.115 0.135 0.300 BSC --- 10_ 0.030 0.040 G H 0.13 (0.005) M T A M B M D SUFFIX PLASTIC PACKAGE CASE 751-05 (SO-8) ISSUE N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A- 8 5 -B- 1 4X P 0.25 (0.010) 4 M B M G R C -T- 8X K D 0.25 (0.010) M T B SEATING PLANE S A M_ S MOTOROLA ANALOG IC DEVICE DATA X 45 _ F J DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.189 0.196 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.007 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 5 MC1403, B NOTES 6 MOTOROLA ANALOG IC DEVICE DATA MC1403, B NOTES MOTOROLA ANALOG IC DEVICE DATA 7 MC1403, B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 8 *MC1403/D* MOTOROLA ANALOG IC DEVICE DATA MC1403/D