HITACHI KAOHSIUNG HITACHI ELECTRONICS CO.,LTD P.O. BOX 26-27 2,13TH EAST ST. K.E.P.Z. KAOHSIUNG TAIWAN R.O.C. TEL:(07) 821-5811(7 LINE) FAX:(07) 821-5815 FOR MESSRS: DATE: Jun.04,2004 SP14Q006-TZA CONTENTS No. ITEM SHEET No. PAGE 1 |COVER 7B64PS 2701- SP14Q006-TZA-4 |1-1/4 2 |RECORD OF REVISION 7B64PS 2702- SP14Q006-TZA-4 |2-1/1 3 |GENERAL SPECIFICATION 7B64PS 2703- SP14Q006-TZA-4 |3-1/1 4 |ABSOLUTE MAXIMUM RATINGS 7B64PS 2704- SP14Q006-TZA-4 [4-1/1 5 |ELECTRICAL CHARACTERISTICS 7B64PS 2705- SP14Q006-TZA-4 |5-1/2~2/2 6 {OPTICAL CHARACTERISTICS 7B64PS _2706- SP14Q006-TZA-4 |6-1/3~3/3 7 |BLOCK DIAGRAM 7B64PS_2707- SP14Q006-TZA-4 |7-1/1 8 |INTERFACE TIMING CHART 7B64PS_ 2708- SP14Q006-TZA-4 |8-1/3~3/3 7B63PS 2709- SP14Q006-TZA-4 |9-1/2 9 OUTLINE DIMENSIONS 7B64PS_ 2709- SP14Q006-TZA-4 |9-2/2 10 [APPEARANCE STANDARD 7B64PS 2710- SP14Q006-TZA-4 |10-1/3~3/3 11 |PRECAUTION IN DESIGN 7B64PS_2711- SP14Q006-TZA-4 |11-1/2~2/2 12 |DESIGNATION OF LOT MARK 7BG64PS_2712- SP14Q006-TZA-4 |12-1/1 13 |PRECAUTION FOR USE 7B64PS 2713- SP14Q006-TZA-4 |13-1/1 14 {TOUCH PANEL SPECIFICATION 7B64PS_2714- SP14Q006-TZA-4 |14-1/4~4/4 * When producis will be discontinued , customers will be informed by HITACHI with twelve months prior announcement. ACCEPTED BY; PROPOSED BY; Aww. Ho GQ te KAOHSIUNG HITACHI sh. ELECTRONICS CO.,LTD. | No. 7B64PS 2701- SP14Q006-TZA-4 PAGE 1-1/1RECORD OF REVISION DATE SHEET No. SUMMARY Oct.22,'03 |7B64PS2709- Changed LED I/F : JAK/1L-G-4S-S3C2 SP14Q006-TZA-2 Page 9-2/2 JAK/IL-G-48-S3C2 Mar.31,'04 |7B64PS2708- 8.3 POWER ON/OFF TIMING SEQUENCE SP14Q006-TZA-3 [Revised tDLD min. 200 50 Page 8-3/3 Revised tCH max. 200 30 7B64PS 2705- 5.1 ELECTRICAL CHARACTERISTICS sP14Q006-TzA-4 [Added Page 5-1/2 ITEM SYMBOL | MIN. TYP. MAX Power Supply Voltage Logic VDD-VSS 3.2 3.3 3.4 21.0 22.0 23.0 Recommend LC Driving Voltage; VDD-VO 20.0 21.0 22.0 19.0 20.0 21.0 7B64PS 2706- 6.2 OPTICAL CHARACTERISTICS OF BACKLIGHT SP14Q006-TZA-4 Added The LCD driving voltage should be adjusted at the Page 6-3/3 voltage where the peak contrast is obtained. 7B64PS 2710- 10.1 APPEARANCE INSPECTION CONDITION SP14Q006-TZA-4 Revised 45>25 Page 10-1/3 7B64PS82711 14.1.2 OPERATING CONDITIONS SP14Q006-TZA-4 Revised Operating Voltage : 5VDC>5.0 /3.3 VBC Page 14-1/4 KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. oh. DATE| Jun.04,'04 7BE64PS 2702- SP14Q006-TZA-4 |PAGE | 2-1/1 No.3. GENERAL SPECIFICATIONS (1) Part Name (2) (3) (4) (5) (6) (7) (8) Outer Dimensions Effective Area Dot Size Dot Pitch Dot Number (Resolution) Duty Ratio LCD Type . (9) (10) Viewing Direction Viewing Angle (11) (12) Backlight Type Touch Panel SP14Q006-TZA 167.0(W)mm~109.0(H)mm17.4 (D) mm max. 120(W)mm min. x 89(H)mm min. 0.345(W)min. * 0.345(H)min. 0.360(W)mm * 0.360(H)mm 320 (W) x 240 (H) dots 1/240 Transflective type F-B/W STN With glare type upper polarizer 6 O'clock Viewing Angle in Rear = - Front (12:00) (6:00) R-F=90"(typ.) LED(Color : white) Analog resistive Transparency : 76% min. Surface type : anti glare KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,04 Sh. No. 7B64PS 2703- SP14Q006-TZA-4 |PAGE | 3-1/14. ABSOLUTE MAXIMUM RATINGS 4.1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS VSS=0V : STANDARD ITEM SYMBOL | MIN. MAX. UNIT | COMMENT Power Supply for Logic VDD-VSS 0 6.0 V . Power Supply for LC Driving VDD-VEE 0 27.5 V Input Signal. Voltage Vi -0.3 VDD+0.3 V_ |(Note 1) Static Electricity VESDO - +100 VV (Note 2,3,4) VESD1 - +10 kV |(Note 2,3,5) Note 1: DOFF , FLM, CL1, CL2 , DO~D3. Note 2: Make certain you are grounded when handling LCM. Note 3: Energy storage capacitance 200pF , discharge resistance 2500 Ta=25'C , 60%RH. Note 4: Contact discharge to I/F connector pins. Note 5: Contact discharge to front metal bezel. 4.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS ITEM OPERATING STORAGE COMMENT MIN. MAX. MIN. MAX. Ambient Temperature -20C 70C -30C 80C _j{(Note 2,3,6,7) Humidity (Note 1) (Note 1) Without Condensation 2.45m/s* 11.76m/s? Vibration - (0.25G) (1.2G) |(Note 4) (Note 5) |1h max 29.4m/s* 490.0m/s* Shock - (3 G) (50 G) |X~Y <Z Directions (Note 5) Corrosive Gas Not Acceptable Not Acceptable Note 1: Ta<40C : 85%RH max. Ta>40C : Absolute humidity must be lower than the humidity of 85%RH at 40C Note 2: Ta at -30C ---< 48h, at 80C ---< 168h. Note 3 : Background color changes slightly depending on ambient temperature. This phenomenon is reversible. Note 4 : 5Hz~100Hz (Except resonance frequency) Note 5: This module should be operated normally after finish the test. Note 6: The response time willbe slower under low temperature. Note 7 : Operation temp not include touch panel. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,04 Sh. No. 7B64PS 2704- SP14Q006-TZA-4 PAGE| 4-1/15. ELECTRICAL CHARACTERISTICS 5.1 ELECTRICAL CHARACTERISTICS ITEM SYMBOL CONDITION MIN. | TYP. | MAX. | UNIT | COMMENT Power Supply Voltage VDD-VSs _ 4.75 5.0 | 5.25 Vv for Logic 3.2 | 3.3 | 3.4 Power Supply Voltage VEE-VSS - -23.1 |-22.0| -20.9 | V for LC Driving H LEVEL O.8VDD|_ - VDD V t Signal Volt Vi Input Signal Voltage i . LEVEL 0 lo2vppl Vv (Note1) Power Supply Current VDD-VSS$=5.0V for Logic IDD | vee-vss=-220v} ~ | &9 | - | mA] (Wote2) Power Supply Current VDD-VSS=5.0V for LC Driving EE | VEE-VSS= -22.0V 5.0 mA | (Note2) Ta= 0 , g=0 21.0 | 22.0 | 23.0 V Recommended LC vob-vo | Ta=25C , g=0" | 20.0 | 21.0] 220! V | (Note3) Driving Voltage - . Ta=50C , d= 0 19.0 | 20.0 | 21.0 V Frame Frequency fFLM - 0 75 80 Hz (Noie4) Note 1: DOFF , FLM, CL1 , CL2 , DO~D3. Note 2 : FLM=75Hz, test pattern is all Q. VDD-V0=21.0V , Ta=25C Note 3: Recommended LC driving voltage may fluctuate about +1.0V by each module. Test pattern is all Q Note 4: Please set the frame frequency so as to avoid flicker and rippling on the display. KAOHSIUNG HITACHI Sh. 04, - - P - ELECTRONICS CO.,LTD. DATE} Jun.04,04 No. 7B64PS 2705- SP14Q006-TZA-4 |PAGE| 5-1/25.2 ELECTRICAL CHARACTERISTICS OF LED BACKLIGHT ITEM SYMBOL | CONDITION | MIN. | TYP. | MAX. | UNIT | COMMENT Power Supply Voltage for LED VLED - - 5.0 5.2 Vv Power Supply Current ILED | VLED=5.0v | - | 160 | - | mA | Note4 for LED Note 1: The ILED changes depending on ambient temperature. 6 30 2 . & 20 e ir 10 \ a 8 0 3 0 20 40 60 80 100 x Ambient Temperature(C } KAOHSIUNG HITACHI Sh. Jun.04,'04 7B64PS 2705- SP14Q006-TZA-4 |PAGE! 5-2/2 ELECTRONICS Co.,LTD. DATE No. Q6. OPTICAL CHARACTERISTICS 6.1 OPTICAL CHARACTERISTICS Ta=25C (Backlight OFF) ITEM SYMBOL | CONDITION | MIN. | TYP. | MAX. | UNIT | NOTE . K220 @=0 90 7 deg 4 Viewing Area 55 gi - ee orre2 - 80 - deg. 1 Contrast Ratio K b=0, 9 =0 - 5 - - 23 Response Time (Rise) tr $=0", 6 =0 - (336) - ms 4 Response Time (Fall) tf $=0", 6 =0 - (148) - ms 4 Note 1 : Definition of @ and o (Measure condition by Hitachi) (Normal) Viewing direction 1 REAR aT aN) 12:00 (@=180) \ d2 REAR \. - LEFT RIGHT x - _ WIN __ 9:00 3:00 LEFT RIGHT Lt FRONT 8 ~ (6=0') 6:00 FRONT <> Note 2 : Definition of viewing angle 01 and o 2 Note 3 : Definition of contrast"K" kK ____ Brightness on non-selected dot (B1) ~ Brightness on selected dot (B2) $1<0< 92 (Bt) A 2.0 $i 2 5 Viewing Angle ao Contrast ratio K vs viewing angle Operating Voltage y Light Distance=@ 4m Backlight LoD KAOHSIUNG HITACHI ' Sh. ELECTRONICS CO.LTD. DATE | Jun.04,'04 No. 7B64PS 2706-SP14Q006-TZA-4 PAGE | 6-1/3Note 4 : Definition of optical response Non-selective state Selective state Non-selective state A w 2 wo sf Oo SJ a =) oO 5 38 ao oO co - tr if Rise Time Fall Time KAOHSIUNG HITACHI ' Sh. ELECTRONICS CO.,LTD. DATE | Jun.04,04 No. 7B64PS 2706-SP14Q006-TZA-4 | PAGE | 6-2/36.2 OPTICAL CHARACTERISTICS OF BACKLIGHT (Backlight ON) ITEM MIN. TYP. MAX. UNIT NOTE Brightness 40 - cd/m? ILED=160mA Brightness Uniformity +30 % Note 1 Ta=25C, Display data should be all ON. The LCD driving voltage should be adjusted at the voltage where the peak contrast is obtained. Note 1: Measure of the following 9 places on the display. Y=80 Y=160 Y=240 X=60 X=120 Ty we Ty SL fy Ae X=180 fT. Le ty SY hy Au ramet Ass iT wi cy M7 Definition of the brightness tolerance. ( Max. or Min. Brightness - Average Brightness Average Brightness ) x 100 KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,'04 Sh. No. 7B64PS 2706- SP14Q006-TZA-4 PAGE 6-3/3gai < (O71 K (051 m Lu FENN OA Oo. LINOMIO ONIWILL : * SoA x daa A S a + a h o Mh ON 2 $}0q O07cx0ZE 3 ~~ 4400 = uno 2 0a 1a za sa = S s LX S L109 3 Wis Ee > a oo oi 6 eo < z10 29 O EO d~0g rn Ye 5 5 0 = wm oO SA xi joued -yonoy S M = "Xx 3 tu8. INTERFACE TIMING CHART 8.1 INTERFACE TIMING CHART 52.1usSTS59.5us Le ~ we CL1 J o IUUUUUL JUUUUUL X240 x1 x2 D3 02 ) D1 Y3NTX KX XX XXX? po FLM a: _ fff, ffi, fi it 240xT | FLM z n i pe Do~D3____ Xx Xx2X_ 5 Koes Xa oe ur tr oe aS >< KAOHSIUNG HITACHI ELECTRONICS CO.,LTD, |PATE| Ju7-04,'04 Sh. No. 7B64PS 2708- SP14Q006-TZA-4 PAGE 8-1/38.2 TIMING CHARACTERISTICS ITEM SYMBOL | MIN. | TYP. | MAX. | UNIT CL2 frequency fCP - - 6.5 MHz CL2 pulse width tw 45 - - ns CL2 rise, fall time tr,tf - - 15 ns Data set up time iDSU 30 - - ns Data hold time tDHD 30 - - ns CL1 set up time tLSU 80 - - ns CL1 clock time tLC 120 - - ns FLM set up time tSETUP 100 - - ns FLM hold time tHOLD 100 - - ns CL1 pulse width twe 125 - ns tw tw tw tr 0.8VDD 0.8VDD 0.8VDD 0.8VDD * CL2 0.2VDD NI 0.2VDD oavon <0.2VDD {DSU ~DHD- 0.8VDD o.aVDD 0.8VDD 0.8VDD DO~D3 x 0.2VDD 0.2VDD <a novop <4 tLSU tLC 0.8VDD _0.8VDD CL1 0.2VDD NJ o2v00 twe tSETUP, {HOLD 0.8VDD . (0.8VDD FLM KAOHSIUNG HITACHI Sh. Jun.04,04 7B64PS 2708- SP14Q006-TZA-4 |PAGE | 8-2/3 ELECTRONICS co.,LTD.|P*!F] <u" No. Q8.3 POWER ON/OFF TIMING SEQUENCE iDLD tDLD VDD 0.95VDD 4 SK 0.95VDD __/ tCH tCH NK Y APA. 0. SIONAL CHU GND tDLCr DLCT GND \ 4 VEE Ne Z 7 iDLCs tDLCs Y 0.8VDD 0.8VDD 4 DOFF 4 0.2VDD 0.2VDD NC GND {LDH tLDH tDOr (DOT SYMBOL MIN. MAX. UNIT COMMENT tDLD 50 - ms tCH 0 30 ms (Note 1) tLDH 0 - ms tDOr - 100 ns tDOf - 100 ns tDLCr 0 - ms (Note 2) tDLCf 0 - ms tDLCs 20 - ms Note 1: Please keep the specified sequence because wrong sequence may cause permanent damage to the LCD panel. Note 2: HITACHI recommends you to use DOFF function. Display quality may deteriorate if you don't use DOFF function. 8.4 POWER SUPPLY FOR LCM (EXAMPLE) VDD VO O+5.0V O-22.0V VEE Note 1: VR: 70kQ KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,04 Sh. No. (B64PS 2708- SP14Q006-TZA-4 PAGE 8-3/39. OUTLINE DIMENSIONS 9.1 OUTLINE DIMENSIONS 167.0 40.5 (200.0) 160.0 40.5 7.0 40.5 S 152.0 20.3 11.0 40.3 136.5 +0.5 T/P outline 14.35 40.3 69 S 122.0 40.5 (20.0) S| x 10.0 121.7 40.2 TIP _V.A. 20.15 40.3 Lio 0 20.5 420.0 min. 21.0 max. . : 118.7 40.2 T/P AA. 21.65 40.3 a) xR 0.36x319+0.345=115.185 23.41 10.3 R Z/ZZ/ZAYU o PY 727 ZA XL ie al | 0 ZZZAYB FH] gi-/ S| F =1E) Ble 7.0 +0.5 13405 2 =|Slo 9/9 3 5.0 +0.5 3 +0. = ~ e co SSS Dao" _ 17 Stiffener Tape i = = = = Ty | 4-93.5 40.3 | 1D | | 2 i F Dots Area coe o 2 | lw Effective Area | lo Conductive Side . - | | CO | <s I | So | Oo]? Window of Metal Frame \ | 3 ~ oO] s oO (84.0) | J OO | j 2 a Poo IH \ Detail A. CN3 / a7 4 LC Jann | diol | 2 CN2 PINt VOCS | | 1o| je} | ,orey |! a 2} S) | >| Ria] 3 NS _T? 7/7 a i } G << elo S 3 | | | | PIS] E) Figo} & w S| = Detail A |: | & S %/ Bl |=} 2 | | e oo # | Ni o | U | gig) |? | |g 8 | | I \ | l o - o a 19 | 1 Viewing Direction I | o a : | | fg x | | \ | < G 2 [= > on eee He a, 5 [=> oe oo a -6- po SCNT 7.0 40.5 = / 7.3 40.5 ib -~- wy 3 i a. iQ A Qt = 35.0 a . 0.3 40.1 \ - ==l (35.0) 2 _ | 0.85 40.2 S B| lw) % 1.25 20.1 Se | Ol al @ 5 0.8 +0.1 = g 1 & _______ \ 2/8 18.75 40.3 Detail B ~lsl= Detail B Note 1: Measurement when adding 9.8 x 10*Pa at the measuring point. Scale : NTS Unit :mm KAOHSIUNG HITACHI vn, [Sh ELECTRONICS CO.LTD. DATE | Jun.04,'04 |njo |7BE3PS 2709- SP14Q006-TZA-4/PAGE | 9-1/29.2 DISPLAY PATTERN 115.185 (320 dots) | ee L] OOO CI <| 3 $} LILIDIL [_] co | L > nooo = Nooo. i ss 0.345 Scale : NTS Unit : m | E0s6 Measurement Tolerance : 10.4 9.3 INTERFACE PIN CONNECTION FPC : pitch 1.25mm 14 pins INTERFACE PIN No. SIGNAL LEVEL FUNCTION LCM | CNi 1 DO H/L 2 Di Display Data 3 D2 4 D3 5 DOFF H/L jH:ON / L: OFF 6 FLM H First Line Marker 7 N.C - - 8 CL1 H>L |Data Latch 9 CL2 H->L |Data Shift 10 VDD - Power Supply for Logic 11 VSS - GND 12 VEE - Power Supply for LC 13 VO - Operating Voltage LC Driving 14 VSS - GND INTERFACE PIN No. SIGNAL LEVEL FUNCTION LCM | CN2 i VLED(+) - Power Supply for LED 2 N.C - - 3 N.C - - 4 VLED(-) - LED GND LED I/F :J.A.E/IL-G-4S-83C2 INTERFACE | PIN No. | SIGNAL FUNCTION 1 XR Analog Signal from Digitizer Right 2 YU Analog Signal from Digitizer Up TIP CNS 3 XL Analog Signal from Digitizer Left 4 YB Analog Signal from Digitizer Bottom FPC : pitch 1.0mm 4pins Recommend suitable connector : (HIROSE) FH12-10(4)SA-ISH KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,04 Sh. No. 7B64PS 2709- SP14Q006-TZA-4 |PAGE 9-2/210. APPEARANCE STANDARD 10.1 APPEARANCE INSPECTION CONDITION Visual inspection should be done under the following condition. (1) The inspection should be done under in the dark room. (2) The CFL should be lighted with the prescribed inverter. (3) The distance between eyes of an inspector and the LCD module is 25cm. (4) The viewing zone is shown the figure . Viewing angle <25 10.2 DEFINITION OF EACH ZONE A zone: Within the effective area specified at page 9-1/2 of this document. B zone: Area between the window of metal frame and the effective area line specified at page 9-1/2 of this document. Effective Area Window of Metal Frame / A zone Do ee ee ee 3 B zone KAOHSIUNG HITACHI Sh. 04, - - -4 [PAGE - ELECTRONICS CO..LTD. DATE] Jun.04,04 No. 7B64PS 2710- SP14Q006-TZA-4 GE | 10-1/310.3 APPEARANCE SPECIFICATION *) if a problem occurs in respect to any of these items, both parties(Customer and HITACHI) will discuss in more detail. No. ITEM CRITERIA A|B Scratches Distinguished one is not acceptable * | = (To be judged by HITACHI limit sample) Dent Same as Above * j= Wrinkles in polarizer [Same as Above * | - Bubbles Average Diameter Maximum Number D(mm) Acceptable D<0.2 Ignore 0.2<D=<0.3 12 O| - 0.3<D<0.5 3 0.5<D None Stains, Filamentous Foreign Maierials, Length Width Maximum Number | ! - Dark Spot L(mm) W(mm) Acceptable L=2.0 W 30.03 Ignore L<3.0 0.03<WsS0.05 6 L L=25 0.05<Ws0.1 1 Round Average Maximum Number Minimum Diameter Acceptable Space Cc D(mm) D<0.2 Ignore - OO} - 0.2 =D<0.33 8 10mm 0.33=D None - D Total Filamentous + Round = 10 Those wiped out easily are acceptable OO Color Tone To be judged by HITACHI limit sample QO} - Color Uniformity Same as above Ol - Pinhole Average Diameter Maximum Number Di(mm) Acceptable D=0.15 Ignore 0.45<D=0.3 10 C=0.015 Ignore Contrast Average Contrast Maximum Minimum |Q] - Irregularity Diameter Number Space (Spot} D(mm) Acceptable D=<0.25 To be Ignore ~ 0.25<D<0.35 | judged by 10 20mm 0.35<Ds<0.5 HITACHI 4 20mm 0.5 <D None - KAOHSIUNG HITACHI Sh. ELECTRONICS CO.LTD. DATE] Jun.04,'04 No. 7B64PS 2710- SP14Q006-TZA-4 |PAGE | 10-2/3No. ITEM AiB Contrast Width Length | Neximum | Minimum Irregularity D(mm) L(mm) Space (Line) Acceptable L (Filamentous) Ws0.25 L=1.2 2 20mm C Ws02 | LS15 3 20mm | O |} D Ws0.15 L=2.0 3 20mm Ws0.1 L=3.0 4 20mm Total 6 Rubbing Scratch |To be judged by HITACHI standard Oi- Note 1 : Definition of average diameter (D) b atb . o 3 =D....... Average Diameter Note 2 : Definition of Iength (L) and width (W) L L 4 = Note 3 : Definition of pinhole a c i e| PD c: Salience 1 silo @ bode KAOHSIUNG HITACHI ing fon. ELECTRONICS CO.. LTD. DATE] Jun.04,'04 No. 7B64PS 2710-SP14Q006-TZA-4 IPAGE | 10-3/311. PRECAUTION IN DESIGN 11.1LC DRIVING VOLTAGE (VEE) AND VIEWING ANGLE RANGE Setting VEE out of the recommended condition will be a cause for a change of viewing angle range. 11.2 PRECAUTIONS AGAINST STATIC CHARGE As this module contains C-MOS LSls , it is not strong against electrostatic discharge. Make certain that the operators body is connected to the ground through a list band etc. And dont touch i/F pins directly. 11.3 POWER ON SEQUENCE Input signals should not be applied to LCD module before power supply voltage is applied and reaches to specified voltage (VDD). If above sequence is not kept, C-MOS LSls of LCD modules may be damaged due to latch up problem. 11.4 PACKAGING (1) No leaving product is preferable in the place of high humidity for a long period of time. For their storage in the place where temperature is 35 C or higher ,special care to prevent them from high humidity is required. A combination of high temperature and high humidity may cause them polarization degradation as well as bubble generation and polarizer peel-off. Please keep the temperature and humidity within the specified range for use and storage. (2) Since polarizers tend to be easily damaged, They should be handled full with care so as not to get them touched, pushed or rubbed. (3) As the adhesives used for adhering polarizers are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, toluene , ethanol and isopropyl alcohol. The following solvents are recommended for use: normal hexane Please contact us when it is necessary for you to use chemicals. (4) Lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. To prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, fo wipe it with absorbent cotton. (5) Immediately wipe off saliva or water drop attached on the display area because its long period adherence may cause deformation or faded color on the spot. (6) Foggy dew deposited on the surface due to coldness will be caused for polarizer damage, stain and dirt on product. When necessary to take out the products from some place at low temperature for test, etc. it is required for them to be warmed up in a container once at the temperature higher than that of room. (7) Touching the display area and contact terminals with bare hands and contaminating them are prohibited, because the stain on the display area and poor insulation between terminals are often caused by being touched by bare hands. (Some cosmetics are detrimental to polarizers.) KAOHSIUNG HITACHI Sh. 04," B - - PAGE | 11- ELECTRONICS CO.,LTD. DATE; Jun.04,04 No. 7B64PS 2711- SP14Q006-TZA-4 GE | 11-1/2(8) In general the quality of glass is fragile so that it tends to be cracked or chipped in handling, specially on its periphery. Be careful not to give it sharp shock caused by dropping down, etc. 11.5 CAUTION FOR OPAERATION (1) It is an indispensable condition to drive LCDs within the specified voltage limit since the higher voltage than the limit causes the shorter LCD life. An electrochemical reaction due io direct current causes LCDs undesirable deterioration ,so that the use of direct current driver should be avoided. (2) Response time will be extremely delayed at lower temperature than the operating temperature range and on the other hand at higher temperature LCDs show dark blue color in them. However those phenomena do not mean malfunction or out of order with LCDs which will come back in the specified operating temperature range. (3) If the display area is pushed hard during operation, some font will be abnormally displayed but it resumes normal condition after turning off once. (4) A slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. Please operate the LCD module under the relative condition of 40C 85%RH. 11.6 STORAGE In case of storing for along period of time (for instance , for years) for the purpose of replacement use , the following ways area recommended. (1) Storage in a polyethylene bag with the opening sealed , so the fresh air will not be entered from outside. (2) Placing in a dark place where neither exposure to direct sunlight nor light is , keeping temperature in the range from 0 C to 35. (3) Storing with no touch on polarizer surface by anything else. (It is recommended to store them as they have been contained inthe inner container at the time of delivery from us.) 11.7 SAFETY (1) It is recommendable to crash damaged or unnecessary LCDs into pieces and wash off liquid crystal by either of solvents such as acetone and ethanol, which should be burned up later. (2) When any liquid leaked out of a damaged glass cell comes in contact with your hands , please wash it off weil with soap and water. KAOHSIUNG HITACHI Sh. .04, B 1- SP14Q006-TZA-4 |PAGE | 11- ELECTRONICS CO.,LTD. DATE] Jun.04,04 No. 7B64PS 2711- SP14Q006-TZA-4 11-2/212. DESIGNATION OF LOT MARK LOT MARK Lot mark is consisted of 4 digital number. alloll3 T YEAR | FIGURE IN . J LOT MARK 2004 4 | Made in Taiwan 2005 5 Week 2006 6 Month 2007 7 Year 2008 8 Note 1 Some products have alphabet at the end or the first. FIGURE IN FIGURE IN WEEK FIGURE IN MONTH LOT MARK MONTH LOT MARK (DAY IN. |LOT MARK Jan. 01 Jul. 07 CALENDAR Feb. 02 Aug. 08 01~07 1 Mar. 03 Sep. 09 08~14 2 Apr. 04 Oct. 10 15~21 3 May 05 Nov. 11 22~28 4 Jun. 06 Dec. 12 29~31 5 Location of lot mark : 4035T on the back side of LCM KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE] Jun.04,04 Sh. No. 7B64PS 2712- SP14Q006-TZA-4 PAGE 12-1/113. PRECAUTION FOR USE 13.1 A limit sample should be provided by the both parties on an occasion when the both parties agreed its necessity. Judgment by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties. 13.2 On the following occasions, the handling of the problem should be decided through discussion and agreement between responsible persons of the both parties. (1) When a question is arisen in the specifications. (2) When a new problem is arisen which is not specified in this specifications. (3) When an inspection specifications change or operating condition change in customer is reported to HITACHI, and some problem is arisen in this specification due to the change. (4) When a new problem is arisen at the customer's operating set for sample evaluation in the customer site. The precaution that should be observed when handling LCM have been explained above. If any points are unclear or if you have any request, please contact HITACHI. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,'04 Sh. No. 7B64PS 2713- SP14Q006-TZA-4 PAGE 13-1/114. TOUCH PANEL SPECIFICATION 14.1 RATINGS 14.1.1 ABSOLUTE MAXIMUM RATINGS ITEM SPECIFICATION COMMENT Operating Voitage 7V Without Contact Current 20mA Condensation 14.1.2 OPERATING CONDITIONS ITEM SPECIFICATION Operating Voltage 5.0/3.3 VDC Contact Current 10 ~20 mA Actuation Force 80g max. (R8,Silicone rubber) 14.2 SURFACE HARDNESS 2H 14.3 OPTICAL CHARACTERISTICS 14.3.1 TRANSPARENCY : 76%.min. (WAVE LENGTH : 450 ~ 700nm) 14.4 ELECTRICAL CHARACTISTICS 14.4.1 CONDUCTIVE RESISTANCE xR TERMINAL CONDUCTIVE RESISTANCE in ~ XR-XL 150~1300Q XL YU-YB 4150-13009 vB CZEIEZID GS YOTEEIEDD 14.4.2 INSULATION RESISTINCE TERMINAL INSULATION RESISTANCE TESTING VOLTAGE X- 20MQ 25VDC 14.4.3 BOUNCE CHATTERING 10ms max. KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Sh. Jun.04,04 No 7B64PS 2714- SP14Q006-TZA -4 PAGE 14-1/414.4.4 LINEARITY (1) LINEARITY Linearity Deviation : 2% max. (2) TESTING CIRCUIT (a) X axis linearity testing method ,100g , VXR-VXL=5V , VOUT=VYU. YB YU TIP Viewing Area 5VDC (b) Y axis linearity method , 100g VYU-VYB=5V , VOUT=VXR (3) CALCULATION (a) X axis linearity _ Emax. LINEARITY= EAT EAn~ x100(%) EAt Po rrr rrr ANE max |! | E(V) Measurement | | 1 Linear ! | EAn An Al | | | | | ! | { | I 1 i I I } I i Input Position KAOHSIUNG HITACHI , Sh. ELECTRONICS CO.,LTD. DATE | Jun.04,'04 No. 7B64PS 2714-SP14Q006-TZA-4 PAGE | 14-2/414.5 ENVIRONMENTAL TESTING ITEM CONDITIONS CRITERIA High Temperature Storage 60C : 120h & 25C: 24h Low Temperature Storage -20C :120h & 25C : 24h Temperaiure Cycle -20C <-> 70TC : 10 Cycles within - 1(30) (60) (30): minutes & 25C :24h (Without Condensation) Humidity Storage 60C , 90%RH. 120h After testing must to meet the specifications of the Electrical, Mechanical & Optical Characteristics. Durability for 150g , R8, HS40 Silicon Rubber Keystroke (Speed : 330mm/sec) : 1000000 Activations 14.6 APPEARANCE SPECIFICATION No. ITEM CRITERIA A |B FILAMENTOUS Length Width Maximum L(mm) W(mm) Number Hair Flaws Acceptable O| - L312 W 0.05 ignore Ls5 0.05<Ws<0.1 3 L>2 0.1<W None Average Diameter Maximum Number A tabl q Dot-shaped D(mm) ao / Impurities Ds0.1 Ignore Oo p P 0.1<D<0.3 5 0.3<D None FILAMENTOUS Length Width Maximum L(mm) w(mm) Number Scratch Acceptable O L<12 W <0.05 Ignore " Ls12 0.05<Ws0.1 5 L>12 0.1<W None KAOHSIUNG HITACHI Sh. .04, 7B64PS 2714- SP14Q006-TZA -4/PAGE | 14-3/4 ELECTRONICS CO.,LTD, [PATE] JU7-04-04 Inyo, Q ;14.6.3 GLASS INDENTATION ITEM SPECIFICATIONS Commen Indentation x Y $5.0} 53.0} st But , indentation can not including seal area. t: Glass thuickness. Corner Broken xX Y Z x Y <2.0|<5.0] St Zz But , indentation can not including seal area. Indentation Witnin Pattern Y Ys71 I|s ignore But , Must to meet the specification of conducting pattern indentation. Proceeding Crack None 14.6.4 BLISTERING (PUFFINESS) : 0.4 mm max. 0.4mm max. ? LL, 0.4mm max. Digitizer KAOHSIUNG HITACHI ELECTRONICS CO.,LTD. DATE Jun.04,'04 Sh. No. 7BO4PS 2714-SP14Q006-TZA-4 PAGE 14-4/4