ZWS-BAF Series www.uk.tdk-lambda.com/zws-baf /(' ,QGXVWULDO 7HVW &RPP 50W to 300W Single Output Power Supplies, Low Cost & High Reliability Worldwide Use %URDGFDVW Features Benefits * 10 Year e-cap Lifetime * Better Field Reliability * 5 Year Warranty * Lower Cost of Ownership * Convection Cooling * Easier Use Specification MODELZWS50-BAF ZWS75-BAF ZWS100-BAF ZWS150-BAF ZWS300-BAF ITEMS AC Input Voltage range - 85 - 265VAC (47-63Hz) DC Input Voltage range - 120 - 370VDC Input Current (typical) (1) A 3V model: 0.45/0.25 3V model: 0.7/0.35 3V model: 0.9/0.45 3V model: 1.3/0.65 12 & 15V models: others: 0.65/0.35 others: 0.95/0.5 others:1.3/0.65 others: 1.9/0.95 3.7/1.9. others:3.6/1/8 Inrush Current - cold start (1) A 15/28 14/28 28 14/28 15/ 30 PFHC All models with Active Power Factor Correction - Designed to meet EN/IEC61000-3-2 Power Factor (1) - 3V model: 0.96/0.85 3V model: 0.96/0.85 3V model: 0.96/0.89 0.97/0.93 Input Current (typical) (1) A others: 0.97/0.91 others: 0.97/0.91 others:0.98/0.93 3.6 7 /.8 Temperature Coefficient <0.02%/ C Hold Up time (Typ) (1) ms 20ms 18ms (typ) at 100Vac & full Load (20ms at 100Vac & 80% load) Leakage Current (3) mA 0.2 / 0.4 max. Remote On/Off Option ( see table next page ) Cooling All models are convection cooling Operating Temperature (2) -10 to +70C, derate linearly to (Convection) -10C to +70C, derate linearly to 50% load from 50C to 70C 40% load from 45 to 70C (from 40C for 12 & 15V models) Operating Temperature (2) Refer to output derating specifications (Forced Air) E-cap lifetime (5) Up to 10 years; 45C ambient, 100% full load, 24 hours Storage Temperature C -30C to +75C Humidity (non condensing) Operating: 30 - 90% RH, Storage: 10 - 90% RH Withstand Voltage I/P to Gnd 2kVAC (10mA), I/P to O/P: 3kVAC (10mA), O/P to Gnd: 500VAC (20mA) for 1mn Isolation Resistance >100M at 25C & 70%RH, Output to Gnd: 500VDC Vibration (non operating) 10 - 55Hz (1 minute sweep), 19.6m/s2 constant X, Y, Z 1 hour each Shock <196.1 m/s Safety agency Certifications UL60950-1, CSA60950-1, EN60950-1, EN50178 (OV II), CE Mark Conducted & Radiated EMI EN55011 / EN55022-B, FCC-B, VCCI-B Immunity IEC61000-6-2 ; IEC61000-4-2, -3, -4, -5, -6, -8, -11 Weight (Typ) g 165 230 290 390 540 Size (W x H x D) (4) mm 50 x 26 x 132 50 x 33 x 150 62 x 33 x 155 75 x 37 x 160 84 x 42 x 180 Warranty yrs 5 Notes: (1) (2) (3) (4) (5) 100 / 200VAC Input, nominal output voltage and max. output power Refer to Thermal Specifications & Application Notes 100 / 230VAC input Refer to Outline Drawing Refer to Reliability Data ZWS-BAF Series 1 Model Selector Model ZWS50BAF-3 ZWS50BAF-5 ZWS50BAF-12 ZWS50BAF-15 ZWS50BAF-24 ZWS50BAF-48 ZWS75BAF-3 ZWS75BAF-5 ZWS75BAF-12 ZWS75BAF-15 ZWS75BAF-24 ZWS75BAF-48 ZWS100BAF-3 ZWS100BAF-5 ZWS100BAF-12 ZWS100BAF-15 ZWS100BAF-24 ZWS100BAF-48 ZWS150BAF-3 ZWS150BAF-5 ZWS150BAF-12 ZWS150BAF-15 ZWS150BAF-24 ZWS150BAF-48 ZWS300BAF-12 ZWS300BAF-15 ZWS300BAF-24 ZWS300BAF-36 ZWS300BAF-48 Output Voltage (V) Output Adjust Range (V) Max. Current (A) 3.3 5 12 15 24 48 3.3 5 12 15 24 48 3.3 5 12 15 24 48 3.3 5 12 15 24 48 12 15 24 36 48 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 39.5-52.8 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 39.5-52.8 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 39.5-52.8 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 39.5-52.8 9.6-13.2 13.5-16.5 21.6-27.5 32.4-39.6 39.5-52.8 10 10 4.3 3.5 2.1 1.1 15 15 6.3 5 3.2 1.6 20 20 8.5 6.7 4.3 2.1 30 30 12.5 10 6.3 3.2 25.0(1) 20.0(1) 12.5(1) 8.4(1) 6.3(1) Max. Output Efficiency Power at 200VAC (W) (%) 33.0 50.0 51.6 52.5 50.4 52.8 49.5 75.0 75.6 75.0 76.8 76.8 66.0 100.0 102.0 100.5 103.2 100.8 99 150 150 150 151.2 153.6 300(1) 300(1) 300(1) 302.4(1) 302.4(1) 78 84 85 86 87 86 78 84 85 86 87 88 84 86 88 88 89 90 84 87 88 89 90 91 89 89 91 91 91 Max. Ripple and Noise (mv pk-pk) Load Reg. (mV) Line Reg. (mV) OCP (A) OVP (V) 160 160 180 180 180 240 160 160 180 180 180 240 160 160 180 180 180 240 160 60 180 180 180 240 180 180 180 300 300 40 40 96 120 150 240 40 40 96 120 150 240 40 40 96 120 150 240 40 40 96 120 150 240 100 120 150 240 240 20 20 48 60 96 192 20 20 48 60 96 192 20 20 48 60 96 192 20 20 48 60 96 192 48 60 96 144 192 >10.5 >10.5 >4.51 >3.67 >2.2 >1.15 >15.7 >15.7 >6.61 >5.25 >3.36 >1.68 >21.0 >21.0 >8.93 >7.04 >4.52 >2.21 >31.5 >31.5 >13.13 >10.5 >6.62 >3.36 >26.25 >23.1 >14.7 >9.87 >7.35 3.79-4.95 5.75-7.0 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 3.79-4.95 5.75-7.0 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 3.79-4.95 5.75-7.0 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 3.79-4.95 5.75-7 13.8-16.2 17.3-20.3 27.6-32.4 55.2-64.8 13.8-16.2 17.3-20.3 28.8-33.6 41.4-48.6 55.2-64.8 Notes: (1) Values given for Convection Cooling: refer to detailed Specifications & Application Notes for 0.7m/s & 1.4m/s Forced Air Option Description /A Option Suffix L-Plate and Cover L-Plate Conformally coated PCB Fixed Output Voltage Remote on/off Terminal Block Terminal Block with L-Plate Terminal Block with L-Plate & Cover /A /L /CO2 /FV /R /T /TL /TA ZWS-BAF Option Matrix Power /A /L /CO2 /FV 50W 3 3 3 3 75W 3 3 3 3 100W 3 3 3 3 3 150W 3 3 3 3 3 300W 3 3 3 available for 12 24 & 48V models /R 3 /T 3 /TL /TA 3 3 Note: Contact Sales for availability of /TL option 2 ZWS-BAF Series /L Option Outline Drawing ZWS50BAF =:6%$) ,1387 9$& +] 287387 9$ $ 0$'(,1-$3$1 Notes: A: 4 - 3.5mm O holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer's chassis. Outline Drawing ZWS75BAF =:6%$) ,1387 9$& +] 287387 9$ $ 0$'(,1-$3$1 Notes: A: 4 - 3.5mm O holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer's chassis. Outline Drawing ZWS100BAF Notes: A: 4 - 3.5mm O holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer's chassis. F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. ZWS-BAF Series 3 Outline Drawing ZWS150BAF Notes: A: 4 - 3.5mm O holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer's chassis. F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. Outline Drawing ZWS300BAF ZWS300BAF- 24/ INPUT 100-240VAC OUTPUT 24 V 14 A 4.0A 50-60Hz R MADE IN JAPAN EHFP 4 Notes: A: 4 - 3.5mm O holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration specification. B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accordance with the specifications. C: Country of manufacture will be shown here. D: is for safety ground connection. E: To keep the distance more than 4mm between PCB edge and customer's chassis. F: Optiion Model (ZWS300BAF-*/R). Remote On/Off Control Connector (CN52): B2BXH-AM (J.S.T.) Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product. ZWS-BAF Series ZWS-BAF Output Derating ZWS-BAF 50 to 150W Models Ta (C) Convection 0.7m/s airflow 100% 100% 100% 100% 75% 50% 100% 100% 100% 100% 100% 70% -10 - 35 40 45 50 60 70 ZWS-BAF 300W 12V & 15V Models Mounting A Load % Ta (C) ZWS-BAF 300W 12V & 15V Models (1) Convection 1.4m/s airflow -10 - +30 40 50 60 100% 100% 80% 60% 100% 100% 100% 80% 70 40% 60% ZWS-BAF 300W 24V, 36V & 48V Models ZWS-BAF 300W 24V, 36V & 48V Models Mounting A, B (1) Load % Ta (C) Convection 0.7m/s airflow 1.4m/s airflow 100% 100% 88% 64% 40% 100% 100% 100% 100% 60% 100% 100% 100% 100% 70% -10 - +30 40 50 60 70 Standard Mounting Mounting A ZWS-BAF 300W all Models Mounting B Note: (1) For other Mounting orientations, refer to Detailed Specifications & Application Notes 5 ZWS-BAF 50 to 150W Models Mounting A, B (1) Load % ZWS-BAF 300W all models Input Voltage VAC 85 90 - 265 ZWS-BAF Series LOAD % 80 100 TDK-Lambda France SAS TDK-Lambda UK Ltd. ZAC des Delaches CS 41077 9 rue Thuillere 91978 Villebon Courtaboeuf France Tel: +33 1 60 12 71 65 Fax: +33 1 60 12 71 66 france@fr.tdk-lambda.com www.fr.tdk-lambda.com Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) 12 71 85 66 66 Fax: +44 (0) 12 71 86 48 94 powersolutions@uk.tdk-lambda.com www.uk.tdk-lambda.com Italy Sales Office TDK-Lambda Ltd. Kibbutz Givat Hashlosha 48800 Israel Tel: +9 723 902 4333 Fax: +9 723 902 4777 info@tdk-lambda.co.il www.tdk-lambda.co.il Via dei Lavoratori 128/130 20092 Cinisello Balsamo (MI) Italy Tel: +39 02 61 29 38 63 Fax: +39 02 61 29 09 00 info.italia@it.tdk-lambda.com www.it.tdk-lambda.com Netherlands info@tdk-lambda.nl www.tdk-lambda.nl C.I.S. Commercial Support: Tel: +7 (495) 665 2627 Technical Support: Tel: +7 (812) 658 0463 info@tdk-lambda.ru www.tdk-lambda.ru TDK-Lambda Germany GmbH Karl-Bold-Strasse 40 77855 Achern Germany Tel: +49 7841 666 0 Fax: +49 7841 5000 info.germany@de.tdk-lambda.com www.de.tdk-lambda.com Local Distribution Austria Sales Office Aredstrasse 22 2544 Leobersdorf Austria Tel: +43 2256 655 84 Fax: +43 2256 645 12 info.germany@de.tdk-lambda.com www.de.tdk-lambda.com Switzerland Sales Office Bahnhofstrasse 50 8305 Dietlikon Switzerland Tel: +41 44 850 53 53 Fax: +41 44 850 53 50 info@de.tdk-lambda.com www.de.tdk-lambda.com www.emea.tdk-lambda.com ZWS-BAF Nov15 v8 ZWS-BAF Series 6