TPS82084SILR - TEXAS INSTRUMENTS - Datasheet.Directory

ZWS-BAF Series

,QGXVWULDO 7HVW

ZWS-BAF Series 1

www.uk.tdk-lambda.com/zws-baf

Features Benets

• 10 Year e-cap Lifetime • Better Field Reliability

• 5 Year Warranty • Lower Cost of Ownership

• Convection Cooling • Easier Use

&RPP

%URDGFDVW

Specication

MODEL ZWS50-BAF ZWS75-BAF ZWS100-BAF ZWS150-BAF ZWS300-BAF

ITEMS

AC Input Voltage range - 85 - 265VAC (47-63Hz)

DC Input Voltage range - 120 - 370VDC

Input Current (typical) (1) A 3V model: 0.45/0.25 3V model: 0.7/0.35 3V model: 0.9/0.45 3V model: 1.3/0.65

12 & 15V models:

others: 0.65/0.35 others: 0.95/0.5 others:1.3/0.65 others: 1.9/0.95

3.7/1.9. others:3.6/1/8

Inrush Current - cold start (1) A 15/28 14/28 28 14/28 15/ 30

PFHC - All models with Active Power Factor Correction - Designed to meet EN/IEC61000-3-2

Power Factor (1) - 3V model: 0.96/0.85 3V model: 0.96/0.85 3V model: 0.96/0.89 0.97/0.93

Input Current (typical) (1) A others: 0.97/0.91 others: 0.97/0.91 others:0.98/0.93 3.6 7 /.8

Temperature Coefcient - <0.02%/ °C

Hold Up time (Typ) (1) ms 20ms

18ms (typ) at 100Vac & full Load

(20ms at 100Vac & 80% load)

Leakage Current (3) mA 0.2 / 0.4 max.

Remote On/Off - Option ( see table next page )

Cooling - All models are convection cooling

Operating Temperature (2) -

-10°C to +70°C, derate linearly to 50% load from 50°C to 70°C

-10° to +70°C, derate linearly to

(Convection)

40% load from 45° to 70°C

(from 40°C for 12 & 15V models)

Operating Temperature (2)

(Forced Air) Refer to output derating specications

E-cap lifetime (5) - Up to 10 years; 45°C ambient, 100% full load, 24 hours

Storage Temperature °C -30°C to +75°C

Humidity (non condensing) - Operating: 30 - 90% RH, Storage: 10 - 90% RH

Withstand Voltage - I/P to Gnd 2kVAC (10mA), I/P to O/P: 3kVAC (10mA), O/P to Gnd: 500VAC (20mA) for 1mn

Isolation Resistance Ω >100MΩ at 25°C & 70%RH, Output to Gnd: 500VDC

Vibration (non operating) - 10 - 55Hz (1 minute sweep), 19.6m/s2 constant X, Y, Z 1 hour each

Shock - <196.1 m/s

Safety agency Certications - UL60950-1, CSA60950-1, EN60950-1, EN50178 (OV II), CE Mark

Conducted & Radiated EMI - EN55011 / EN55022-B, FCC-B, VCCI-B

Immunity - IEC61000-6-2 ; IEC61000-4-2, -3, -4, -5, -6, -8, -11

Weight (Typ) g 165 230 290 390 540

Size (W x H x D) (4) mm 50 x 26 x 132 50 x 33 x 150 62 x 33 x 155 75 x 37 x 160 84 x 42 x 180

Warranty yrs 5

Notes: 

(1) 100 / 200VAC Input, nominal output voltage and max. output power

(2) Refer to Thermal Specications & Application Notes

(3) 100 / 230VAC input

(4) Refer to Outline Drawing

(5) Refer to Reliability Data

/('

50Wto300WSingleOutput

PowerSupplies,

LowCost&HighReliability

WorldwideUse

ZWS-BAF Series

ModelSelector

  Output OutputAdjust Max. Max.Output Efciency Max.Ripple Load Line OCP OVP

 Model Voltage Range Current Power at200VAC andNoise Reg. Reg. (A) (V)

  (V) (V) (A) (W) (%) (mvpk-pk) (mV) (mV)

ZWS50BAF-3 3.3 2.97-3.63 10 33.0 78 160 40 20 >10.5 3.79-4.95

ZWS50BAF-5 5 4.5-5.5 10 50.0 84 160 40 20 >10.5 5.75-7.0

ZWS50BAF-12 12 10.8-13.2 4.3 51.6 85 180 96 48 >4.51 13.8-16.2

ZWS50BAF-15 15 13.5-16.5 3.5 52.5 86 180 120 60 >3.67 17.3-20.3

ZWS50BAF-24 24 21.6-26.4 2.1 50.4 87 180 150 96 >2.2 27.6-32.4

ZWS50BAF-48 48 39.5-52.8 1.1 52.8 86 240 240 192 >1.15 55.2-64.8

ZWS75BAF-3 3.3 2.97-3.63 15 49.5 78 160 40 20 >15.7 3.79-4.95

ZWS75BAF-5 5 4.5-5.5 15 75.0 84 160 40 20 >15.7 5.75-7.0

ZWS75BAF-12 12 10.8-13.2 6.3 75.6 85 180 96 48 >6.61 13.8-16.2

ZWS75BAF-15 15 13.5-16.5 5 75.0 86 180 120 60 >5.25 17.3-20.3

ZWS75BAF-24 24 21.6-26.4 3.2 76.8 87 180 150 96 >3.36 27.6-32.4

ZWS75BAF-48 48 39.5-52.8 1.6 76.8 88 240 240 192 >1.68 55.2-64.8

ZWS100BAF-3 3.3 2.97-3.63 20 66.0 84 160 40 20 >21.0 3.79-4.95

ZWS100BAF-5 5 4.5-5.5 20 100.0 86 160 40 20 >21.0 5.75-7.0

ZWS100BAF-12 12 10.8-13.2 8.5 102.0 88 180 96 48 >8.93 13.8-16.2

ZWS100BAF-15 15 13.5-16.5 6.7 100.5 88 180 120 60 >7.04 17.3-20.3

ZWS100BAF-24 24 21.6-26.4 4.3 103.2 89 180 150 96 >4.52 27.6-32.4

ZWS100BAF-48 48 39.5-52.8 2.1 100.8 90 240 240 192 >2.21 55.2-64.8

ZWS150BAF-3 3.3 2.97-3.63 30 99 84 160 40 20 >31.5 3.79-4.95

ZWS150BAF-5 5 4.5-5.5 30 150 87 60 40 20 >31.5 5.75-7

ZWS150BAF-12 12 10.8-13.2 12.5 150 88 180 96 48 >13.13 13.8-16.2

ZWS150BAF-15 15 13.5-16.5 10 150 89 180 120 60 >10.5 17.3-20.3

ZWS150BAF-24 24 21.6-26.4 6.3 151.2 90 180 150 96 >6.62 27.6-32.4

ZWS150BAF-48 48 39.5-52.8 3.2 153.6 91 240 240 192 >3.36 55.2-64.8

ZWS300BAF-12 12 9.6-13.2 25.0(1) 300(1) 89 180 100 48 >26.25 13.8-16.2

ZWS300BAF-15 15 13.5-16.5 20.0(1) 300(1) 89 180 120 60 >23.1 17.3-20.3

ZWS300BAF-24 24 21.6-27.5 12.5(1) 300(1) 91 180 150 96 >14.7 28.8-33.6

ZWS300BAF-36 36 32.4-39.6 8.4(1) 302.4(1) 91 300 240 144 >9.87 41.4-48.6

ZWS300BAF-48 48 39.5-52.8 6.3(1) 302.4(1) 91 300 240 192 >7.35 55.2-64.8

OptionDescription

    Sufx

L-Plate and Cover /A

L-Plate /L

Conformally coated PCB /CO2

Fixed Output Voltage /FV

Remote on/off /R

Terminal Block /T

Terminal Block with L-Plate /TL

Terminal Block with L-Plate & Cover /TA

/A Option /L Option

ZWS-BAFOptionMatrix

Power /A /L /CO2 /FV /R /T /TL /TA

availablefor12

24&48Vmodels

50W 3 3 3 3

75W 3 3 3 3

100W 3 3 3 3 3

150W 3 3 3 3 3

300W 3 3 3 3 3 3 3

Notes: (1) Values given for Convection Cooling: refer to detailed Specications & Application Notes for 0.7m/s & 1.4m/s Forced Air

Note: Contact Sales for availability of /TL option

ZWS-BAF Series 3

OutlineDrawingZWS50BAF

OutlineDrawingZWS75BAF

9$

9$&

=:6%$)

287387

+]

,1387

0$'(,1-$3$1

$

Notes:

A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the

vibration specication.

B: Model name, input voltage range nominal output voltage and maximum output current are shown here in

accordance with the specications.

C: Country of manufacture will be shown here. D: is for safety ground connection.

E: To keep the distance more than 4mm between PCB edge and customer’s chassis.

0$'(,1-$3$1

=:6%$)

,1387

+]

287387

9$&

9$

$

Notes:

A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibra-

tion specication.

B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accord-

ance with the specications.

C: Country of manufacture will be shown here. D: is for safety ground connection.

E: To keep the distance more than 4mm between PCB edge and customer’s chassis.

Notes:

A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the vibration

specication.

B: Model name, input voltage range nominal output voltage and maximum output current are shown here in accord-

ance with the specications.

C: Country of manufacture will be shown here. D: is for safety ground connection.

E: To keep the distance more than 4mm between PCB edge and customer’s chassis.

F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.). Match-

ing Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110

(J.S.T.) Matching Housing & Terminal --- not included with the product.

OutlineDrawingZWS100BAF

ZWS-BAF Series

OutlineDrawingZWS300BAF

OutlineDrawingZWS150BAF

Notes:

A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in order to conform the

vibration specication.

B: Model name, input voltage range nominal output voltage and maximum output current are shown here in

accordance with the specications.

C: Country of manufacture will be shown here. D: is for safety ground connection.

E: To keep the distance more than 4mm between PCB edge and customer’s chassis.

F: Remote On/Off Control Connector (CN52): B2B-XH-AM (J.S.T.) Option Matching Housing: XHP-2 (J.S.T.).

Matching Terminal: BXH-001T-P0.6 (J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or

YRS-110 (J.S.T.) Matching Housing & Terminal --- not included with the product.

MADE IN JAPAN

ZWS300BAF- 24/

OUTPUT 24 V 14 A 50-60Hz

INPUT 100-240VAC 4.0A

EHFP

Notes:

A: 4 - 3.5mm Ø holes are for customers chassis mounting holes. All must be screwed in

order to conform the vibration specication.

B: Model name, input voltage range nominal output voltage and maximum output current

are shown here in accordance with the specications.

C: Country of manufacture will be shown here. D: is for safety ground connection.

E: To keep the distance more than 4mm between PCB edge and customer’s chassis.

F: Optiion Model (ZWS300BAF-*/R). Remote On/Off Control Connector (CN52): B2B-

XH-AM (J.S.T.) Matching Housing: XHP-2 (J.S.T.). Matching Terminal: BXH-001T-P0.6

(J.S.T.) or SXH-001T-P0.6 (J.S.T.) Hand Crimping Tool: YC-110R (J.S.T.) or YRS-110

(J.S.T.) Matching Housing & Terminal --- not included with the product.

ZWS-BAF50to150WModels

MountingA,B(1)

Load%

 Ta(°C)  Convection 0.7m/sairow

-10 - 35 100% 100%

40 100% 100%

45 100% 100%

50 100% 100%

60 75% 100%

70 50% 70%

ZWS-BAF50to150WModels

ZWS-BAF300W12V&15VModels

ZWS-BAF300W24V,36V&48VModels

ZWS-BAF300WallModels

StandardMounting

MountingA MountingB

Note:(1) For other Mounting orientations, refer to

Detailed Specications & Application Notes

ZWS-BAF Series

ZWS-BAFOutputDerating

ZWS-BAF300W12V&15VModels

MountingA(1)

Load%

 Ta(°C)  Convection 1.4m/sairow

-10 - +30 100% 100%

40 100% 100%

50 80% 100%

60 60% 80%

70 40% 60%

ZWS-BAF300W24V,36V&48VModels

MountingA,B(1)

Load%

 Ta(°C)  Convection 0.7m/sairow 1.4m/sairow

-10 - +30 100% 100% 100%

40 100% 100% 100%

50 88% 100% 100%

60 64% 100% 100%

70 40% 60% 70%

ZWS-BAF300Wallmodels

 InputVoltageVAC LOAD%

85 80

90 - 265 100

www.emea.tdk-lambda.com

TDK-Lambda France SAS

ZAC des Delaches

CS 41077

9 rue Thuillere

91978 Villebon Courtaboeuf

France

Tel: +33 1 60 12 71 65

Fax: +33 1 60 12 71 66

france@fr.tdk-lambda.com

www.fr.tdk-lambda.com

Italy Sales Office

Via dei Lavoratori 128/130

20092 Cinisello Balsamo (MI)

Italy

Tel: +39 02 61 29 38 63

Fax: +39 02 61 29 09 00

info.italia@it.tdk-lambda.com

www.it.tdk-lambda.com

Netherlands

info@tdk-lambda.nl

www.tdk-lambda.nl

TDK-Lambda Germany GmbH

Karl-Bold-Strasse 40

77855 Achern

Germany

Tel: +49 7841 666 0

Fax: +49 7841 5000

info.germany@de.tdk-lambda.com

www.de.tdk-lambda.com

Austria Sales Office

Aredstrasse 22

2544 Leobersdorf

Austria

Tel: +43 2256 655 84

Fax: +43 2256 645 12

info.germany@de.tdk-lambda.com

www.de.tdk-lambda.com

Switzerland Sales Office

Bahnhofstrasse 50

8305 Dietlikon

Switzerland

Tel: +41 44 850 53 53

Fax: +41 44 850 53 50

info@de.tdk-lambda.com

www.de.tdk-lambda.com

TDK-Lambda UK Ltd.

Kingsley Avenue

Ilfracombe

Devon EX34 8ES

United Kingdom

Tel: +44 (0) 12 71 85 66 66

Fax: +44 (0) 12 71 86 48 94

powersolutions@uk.tdk-lambda.com

www.uk.tdk-lambda.com

TDK-Lambda Ltd.

Kibbutz

Givat Hashlosha 48800

Israel

Tel: +9 723 902 4333

Fax: +9 723 902 4777

info@tdk-lambda.co.il

www.tdk-lambda.co.il

C.I.S.

Commercial Support:

Tel: +7 (495) 665 2627

Technical Support:

Tel: +7 (812) 658 0463

info@tdk-lambda.ru

www.tdk-lambda.ru

Local Distribution

ZWS-BAF Series 6

ZWS-BAF Nov15 v8