Catalog E XXXXXX 08/12 Edition 3 www.erni.com 1
ERbic CANbus
Technical Data
Interface connector: D-Sub, female class 2
PU connection: D-Sub, male class 2
Cable termination: 2 x horizontal cable outlets
can be covered by blind plate
Cable diameter: 6 – 9 mm
Cross section of
cage clamp: 0.08 – 0.5 mm2 (0.75 mm2)
Data transmission rate: max. 1 MBit/s (CAN-Spezification)
Temperature range: -20 °C – +70 °C
Permissible humidity: max. 75% at +25 °C, non-condensing
Protection class: IP 20
Housing material : Thermoplast UL94V-1
D-Sub screw 4/4 UNC: slottet head screw
UL approval: in preparation
CE marking: ERbic connectors are passive
components and do not need to be
identified with CE marking acc. to
EU directives.
Features
• All parts are pre-assembled, only 1 mounting screw
• Extremely flexible due to:
- Spring clamp terminal
- Changeable cable clamps for different cable diameters fom
6 to 9 mm (8 mm pre-assembled, 7 mm enclosed)
• Best quality due to use of the new ERNI D-Sub connector ge-
neration
• Externally connectable termination resistor
• Optional diagnostic-interface
• Extra metallic stamped shield connection for optimal shield
contact
• Processible with only one tool (screwdriver)
• Exchangeable ID plate for manuel or automatic labeling
• Due to the red lever the switch setting is well visible
• Compact design
• Large area for customer-specific labeling, neutral version or
with custom company-logo
Recommended Cables
LAPP cables (for standard cable clamp 8 mm):
UNITRONIC BUS CAN UL/CSA 2170266 ø 7.5 mm
UNITRONIC BUS FD P CAN UL/CSA 2170278 ø 8.0 mm
Helu cables (for cable clamp 7 mm):
CAN Bus cable 800571 ø 7.0 mm
CAN Bus cable, high flexible 802182 ø 6.9 mm
2 Catalog E XXXXXX 08/12 Edition 3 www.erni.com
Dimensional Drawings
Ordering Information
CANbus without PU connection CANbus with PU connection
ERbic CANbus
Version: only CAN-Signal
Pin Configuration
Terminal D-Sub Pin Wire color Signal
GND 3 shielding CAN Ground
C-L 2 white CAN-Low
C-H 7 brown CAN-High
C-L 2 white CAN-Low
C-H 7 brown CAN-High
GND 3 shielding CAN Ground
Configuration D-Sub 9-pin Color Termination Part Number
CANbus with Service/PU connection female and male black cage clamp
(PU connection)
Single box packaging: - ERbic with pre-mounted cable clamp 8 mm
- Installation instructions
- additional cable clamp 7 mm
- blind plate for unused cable outlets
CANbus without Service/PU connection female black cage clamp 366328
366331
Catalog E XXXXXX 08/12 Edition 3 www.erni.com 3
Dimensional Drawings
Configuration D-Sub 9-pin Color Termination Part Number
CANbus with Service/PU connection female and male black screw terminal
(PU connection)
Single box packaging: - ERbic with pre-mounted cable clamp 8 mm
- Installation instructions
- additional cable clamp 7 mm
- blind plate for unused cable outlets
Ordering Information
Kennzeichnungsschild
wechselbar
35,1
38,1
69,6
33,6
53,1
50,8
72,8
Gewinde #4-40
Kennzeichnungsschild
wechselbar
43,8
72,8
53,1
38,1
50,8
35,1
33,6
16,2
Gewinde #4-40
Gewinde #4-40
CANbus without PU connection CANbus with PU connection
CANbus without Service/PU connection female black screw terminal
Pin Configuration
Terminal D-Sub Pin Wire color Signal
V+ 9 V+
V- 6 V-
GND 3 shielding CAN Ground
C-L 2 white CAN-Low
C-H 7 brown CAN-High
C-L 2 white CAN-Low
C-H 7 brown CAN-High
GND 3 shielding CAN Ground
V+ 9 V+
V- 6 V-
ERbic CANbus
Version: CAN-Signal and Additional Voltage Feed
366343
366346
4 Catalog E XXXXXX 08/12 Edition 3 www.erni.com
Printed in Germany · Subject to modification without prior notice.
ERbic CANbus
Accessories
Ordering Information
Cable clamp 6 mm light gray
Configuration Cable diameter Color Part Number
Cable clamp 9 mm light gray
ID plate - white
224427
224433
134577
