SUBMINIATURE SOLID STATE LAMP Part Number: KM2520SGC01 Super Bright Green Features Description z Subminiature package. The Super Bright Green source color devices are made with z Long life solid state reliability. Gallium Phosphide Green Light Emitting Diode. z Low package profile. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAA9681 REV NO: V.13B DATE: APR/01/2013 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1202000628 Selection Guide Part No. Dice KM2520SGC01 Iv (mcd) [2] @ 20mA Lens Type Super Bright Green (GaP) Viewing Angle [1] Min. Typ. 21/2 40 90 20 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAA9681 REV NO: V.13B DATE: APR/01/2013 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1202000628 Super Bright Green KM2520SGC01 SPEC NO: DSAA9681 REV NO: V.13B DATE: APR/01/2013 PAGE: 3 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1202000628 PACKING & LABEL SPECIFICATIONS KM2520SGC01 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAA9681 REV NO: V.13B DATE: APR/01/2013 PAGE: 4 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1202000628