XPower PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE Part Number: AAD1-9090BRGC-01/3 Blue Reddish-Orange Green Features Super high flux output and high luminance. Designed for high current operation. Low thermal resistance. Low voltage DC operated. Superior ESD protection. Not reflow compatible. Applications The component is internally protected with silicone gel. z traffic signaling. RoHS compliant. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. Application Note z portable light source (e.g. bicycle flashlight). Static electricity and surge damage the LEDS. z signal and symbol luminaire for orientation. It is recommended to use a wrist band or anti-electrostatic z marker lights (e.g. steps, exit ways, etc). glove when handling the LEDs. z decorative and entertainment lighting. All devices, equipment and machinery must be electrically z indoor and outdoor commercial and residential architectural lighting. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 1 OF 9 ERP: 1201200017 Selection Guide Part No. Dice Lens Type luminous Intensity [2] Iv(cd)@ 350mA BLUE (AlGaInN) AAD1-9090BRGC-01/3 Reddish-Orange (AlGaInP) WATER CLEAR Green (AlGaInN) v (lm) [2] @ 350mA Min. Typ. Min. Typ. 2.5 3.5 15 20 6.7 8 25 30 10 16 32 50 Viewing Angle [1] 21/2 135 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25C Parameter Power dissipation Junction temperature Symbol Pt TJ Device Value Blue 1.25 Reddish-Orange 1.05 Green 1.33 Blue 110 Reddish-Orange 110 Green 110 Unit W C Blue Operating Temperature Top Reddish-Orange -40 To +100 C -40 To +100 C Green Blue Storage Temperature Tstg Reddish-Orange Green DC Forward Current [1] Peak Forward Current [2] Thermal resistance [1] IF IFM Rth j-slug Blue 350 Reddish-Orange 350 Green 350 Blue 500 Reddish-Orange 500 Green 500 Blue 9 Reddish-Orange 12 Green 9 mA mA C/W Blue Electrostatic Discharge Threshold (HBM) Reddish-Orange 8000 V Green Blue Iron Soldering [3] Reddish-Orange 350C For 3 Seconds Green Notes: 1. Results from mounting on MCPCB. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3.1.29mm distance from solder joint to package. SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 2 OF 9 ERP: 1201200017 Electrical / Optical Characteristics at TA=25C Value Parameter Symbol Device Unit Min. Wavelength at peak emission IF=350mA peak Dominant Wavelength IF=350mA dom [1] Spectral bandwidth at 50%REL MAX IF=350mA Forward Voltage IF=350mA Temperature coefficient of peak IF=350mA, -10C T100C Temperature coefficient of dom IF=350mA, -10C T100C Temperature coefficient of VF IF=350mA, -10C T100C VF [2] TCpeak TCdom TCV Typ. Blue 452 Reddish-Orange 640 Green 520 Blue 458 Reddish-Orange 625 Green 530 Blue 20 Reddish-Orange 30 Green 35 Max. nm nm nm Blue 2.8 3.2 3.6 Reddish-Orange 2.0 2.5 3.0 Green 2.7 3.3 3.8 Blue 0.2 Reddish-Orange 0.12 Green 0.16 Blue 0.1 Reddish-Orange 0.05 Green 0.14 Blue -3.2 Reddish-Orange -2.6 Green -2.26 V nm/ C nm/ C mV/ C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 3 OF 9 ERP: 1201200017 AAD1-9090BRGC-01/3 Blue SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 4 OF 9 ERP: 1201200017 Reddish-Orange SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 5 OF 9 ERP: 1201200017 Green SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 6 OF 9 ERP: 1201200017 AAD1-9090BRGC-01/3 Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 7 OF 9 ERP: 1201200017 AAD1-9090BRGC-01/3 Recommended Solder Steps SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 8 OF 9 ERP: 1201200017 PACKING & LABEL SPECIFICATIONS AAD1-9090BRGC-01/3 SPEC NO: DSAH1169 REV NO: V.6 DATE: MAR/31/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 9 OF 9 ERP: 1201200017