Important notice
Dear Customer,
On 7 February 2017 the former NXP Standard Product business became a new company with the
tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS
semiconductors with its focus on the automotive, industrial, computing, consumer and wearable
application markets
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use
the references to Nexperia, as shown below.
Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,
use http://www.nexperia.com
Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use
salesaddresses@nexperia.com (email)
Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on
the version, as shown below:
- © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights
reserved
Should be replaced with:
- © Nexperia B.V. (year). All rights reserved.
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail
or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and
understanding,
Kind regards,
Team Nexperia
DATA SH EET
Product data sheet
Supersedes data of 2004 May 05 2004 Jul 30
DISCRETE SEMICONDUCTORS
PDTA115E series
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩ
2004 Jul 30 2
NXP Semiconductors Product data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
FEATURES
Built-in bias resistors
Simplified circuit design
Reduction of component count
Reduced pick and place costs.
APPLICATIONS
General purpose switc hing and amplification
Inverter and interface c ir cu i ts
Circuit driver.
QUICK REFERENCE DATA
DESCRIPTION
PNP resistor-equipped transistor (see “Simplified outline,
symbol and pinning” for pac kage details).
SYMBOL PARAMETER TYP. MAX. UNIT
VCEO collector-emitter
voltage 50 V
IOoutput curr en t (DC) 20 mA
R1 bias resistor 100 kΩ
R2 bias resistor 100 kΩ
PRODUCT OVERVIEW
Note
1. * = p: Made in Hong Kong.
* = t: Made in Malaysia.
* = W: Made in China.
TYPE NUMBER PACKAGE MARKING CODE NPN COMPLEMENT
PHILIPS EIAJ
PDTA115EE SOT416 SC-75 5E PDTC115EE
PDTA115EEF SOT490 SC-89 6B PDTC115EEF
PDTA115EK SOT346 SC-59 62 PDTC115EK
PDTA115EM SOT883 SC-101 F6 PDTC115EM
PDTA115ES SOT54 (TO-92) SC-43 TA115E PDTC115ES
PDTA115ET SOT23 *AB(1) PDTC115ET
PDTA115EU SOT323 SC-70 *7C(1) PDTC115EU
2004 Jul 30 3
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
SIMPLIFIED OUTLINE, SYMBOL AND PINNING
TYPE NUMBER SIMPLIFIED OUTLINE AND SYMBOL PINNING
PIN DESCRIPTION
PDTA115ES 1base
2collector
3emitter
PDTA115EE 1base
PDTA115EEF 2emitter
PDTA115EK 3collector
PDTA115ET
PDTA115EU
PDTA115EM 1base
2emitter
3collector
handbook, halfpage
MAM338
1
2
3
R1
R2
2
3
1
handbook, halfpage
MDB271
Top view
12
3
1
2
3
R1
R2
handbook, halfpage
MDB267
2
1
3
Bottom view
1
2
3
R1
R2
2004 Jul 30 4
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
ORDERING INFORMATION
LIMITING VALUES
In accordance with th e Absolute Maximum Ratin g S ystem (IEC 60134).
Notes
1. Refer to standard mounting conditions.
2. Reflow soldering is the only recommended soldering method.
3. Refer to SOT883 standard mounting conditions; FR4 with 60 μm copper strip line.
TYPE NUMBER PACKAGE
NAME DESCRIPTION VERSION
PDTA115EE plastic surface mounted package; 3 leads SOT416
PDTA115EEF plastic surface mounted package; 3 leads SOT490
PDTA115EK plastic surface mounted package; 3 leads SOT346
PDTA115EM leadless ultra small plastic package; 3 solder lands; body
1.0 × 0.6 × 0.5 mm SOT883
PDTA115ES pla stic single-ended leaded (through ho le) packag e; 3 leads SOT54
PDTA115ET plastic surface mounted package; 3 leads SOT23
PDTA115EU plastic surface mounted package; 3 leads SOT323
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCBO collector-base voltage open emitter 50 V
VCEO collector-emitter voltage open base 50 V
VEBO emitter-base voltage open collector 10 V
VIinput voltage
positive +10 V
negative 40 V
IOoutput current (DC) 20 mA
ICM peak collector current 100 mA
Ptot total power dissipation Tamb 25 °C
SOT23 note 1 250 mW
SOT54 note 1 500 mW
SOT323 note 1 200 mW
SOT346 note 1 250 mW
SOT416 note 1 150 mW
SOT490 notes 1 and 2 250 mW
SOT883 notes 2 and 3 250 mW
Tstg storage temperature 65 +150 °C
Tjjunction temperature 150 °C
Tamb operating ambient temperature 65 +150 °C
2004 Jul 30 5
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
THERMAL CHARACTE RISTICS
Notes
1. Refer to standard mounting conditions.
2. Reflow soldering is the only recommended soldering method.
3. Refer to SOT883 standard mounting conditions; FR4 with 60 μm copper strip line.
CHARACTERISTICS
Tamb = 25 °C unless otherwise specified.
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth(j-a) thermal resistance from junction to ambient Tamb 25 °C
SOT23 note 1 500 K/W
SOT54 note 1 250 K/W
SOT323 note 1 625 K/W
SOT346 note 1 500 K/W
SOT416 note 1 833 K/W
SOT490 notes 1 and 2 500 K/W
SOT883 notes 2 and 3 500 K/W
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
ICBO collector-base cut-off current VCB = 50 V; IE = 0 A −−−100 nA
ICEO collector-emitter cut-off current VCE = 30 V; IB = 0 A −−−1μA
VCE = 30 V; IB = 0 A;
Tj = 150 °C−−−50 μA
IEBO emitter-base cu t-off current VEB = 5 V; IC = 0 A −−−50 μA
hFE DC current gain VCE = 5 V; IC = 5 mA 80
VCEsat collector-emitter saturation voltage IC = 5 mA; IB = 0.25 mA −−−150 mV
Vi(off) input-off voltage IC = 100 μA; VCE = 5 V 1.2 0.5 V
Vi(on) input-on voltage IC = 1 mA; VCE = 0.3 V 31.6 V
R1 input resistor 70 100 130 kΩ
resistor ratio 0.8 11.2
Cccollector capacitance IE = ie = 0 A; VCB = 10 V;
f = 1 MHz −−3pF
R2
R1
--------
2004 Jul 30 6
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
PACKAGE OUTLINES
UNIT A1
max bpcDEe1HELpQw
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.1 0.30
0.15 0.25
0.10 1.8
1.4 0.9
0.7 0.5
e
11.75
1.45 0.2
v
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15 0.23
0.13
SOT416 SC-75
wM
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
EAB
B
vMA
0 0.5 1 mm
scale
A
0.95
0.60
c
X
12
3
Plastic surface-mounted package; 3 leads SOT41
6
04-11-04
06-03-16
2004 Jul 30 7
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
UNIT bpcDE e1HELpwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
05-07-28
06-03-16
IEC JEDEC JEITA
mm 0.33
0.23 0.2
0.1 1.7
1.5 0.95
0.75 0.5
e
1.0 1.7
1.5 0.1
0.1
DIMENSIONS (mm are the original dimensions)
0.5
0.3
SOT490 SC-89
bp
D
e1
e
A
Lp
detail X
HE
E
wM
vMA
B
AB
0 1 2 mm
scale
A
0.8
0.6
c
X
12
3
Plastic surface-mounted package; 3 leads SOT49
0
2004 Jul 30 8
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
UNIT A
1
b
p
cDE e
1
H
E
L
p
Qwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.50
0.35 0.26
0.10 3.1
2.7 1.7
1.3 0.95
e
1.9 3.0
2.5 0.33
0.23 0.2
0.2
DIMENSIONS (mm are the original dimensions)
0.6
0.2
SOT346 TO-236 SC-59A
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
w
M
v
M
A
B
A
B
0 1 2 mm
scale
A
1.3
1.0 0.1
0.013
c
X
12
3
Plastic surface-mounted package; 3 leads SOT34
6
04-11-11
06-03-16
2004 Jul 30 9
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
UNIT A1
max.
A(1) bb
1e1
eLL
1
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.50
0.46 0.20
0.12 0.55
0.47
0.03 0.62
0.55 0.35 0.65
DIMENSIONS (mm are the original dimensions)
Note
1. Including plating thickness
0.30
0.22
0.30
0.22
SOT883 SC-101 03-02-05
03-04-03
DE
1.02
0.95
L
E
2
3
1
b
b1
A1
A
D
L1
0 0.5 1 mm
scale
L
eadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm SOT88
3
e
e1
2004 Jul 30 10
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
UNIT A
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 5.2
5.0
b
0.48
0.40
c
0.45
0.38
D
4.8
4.4
d
1.7
1.4
E
4.2
3.6
L
14.5
12.7
e
2.54
e1
1.27
L1(1)
max.
2.5
b1
0.66
0.55
DIMENSIONS (mm are the original dimensions)
Note
1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities.
SOT54 TO-92 SC-43A 04-06-28
04-11-16
A L
0 2.5 5 mm
scale
b
c
D
b1L1
d
E
Plastic single-ended leaded (through hole) package; 3 leads SOT5
4
e1e
1
2
3
2004 Jul 30 11
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
UNIT A
1
max. b
p
cDE e
1
H
E
L
p
Qwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
04-11-04
06-03-16
IEC JEDEC JEITA
mm 0.1 0.48
0.38 0.15
0.09 3.0
2.8 1.4
1.2 0.95
e
1.9 2.5
2.1 0.55
0.45 0.1
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT23 TO-236AB
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
w
M
v
M
A
B
AB
0 1 2 mm
scale
A
1.1
0.9
c
X
12
3
Plastic surface-mounted package; 3 leads SOT2
3
2004 Jul 30 12
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
UNIT A1
max bpcD Ee1HELpQwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.1
1.1
0.8 0.4
0.3 0.25
0.10 2.2
1.8 1.35
1.15 0.65
e
1.3 2.2
2.0 0.23
0.13 0.20.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT323 SC-70
wM
bp
D
e1
e
A
B
A1
Lp
Q
detail X
c
HE
E
vMA
AB
y
0 1 2 mm
scale
A
X
12
3
Plastic surface-mounted package; 3 leads SOT32
3
04-11-04
06-03-16
2004 Jul 30 13
NXP Semiconductors Pr oduct data sheet
PNP resistor-equipped transistors;
R1 = 100 kΩ, R2 = 100 kΩPDTA115E series
DATA SHEET STATUS
Notes
1. Please consult the most recently issued document before initiating or completing a design.
2. The product s ta tus of device(s ) described in this document may have changed since this document was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DOCUMENT
STATUS(1) PRODUCT
STATUS(2) DEFINITION
Objective data sheet Development This document contains data from the objective specification for pro duct
development.
Preliminary data sheet Qualification This document contains data from the preliminary specification.
Product data sheet Production T his document contains the product specification.
DISCLAIMERS
General Information in this document is believed to be
accurate and reliable . H ow ev er, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequenc es of use of such information.
Right to make changes NXP Semiconductors
reserves the right to make changes to information
published in this doc ument, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Suitability for use NXP Semiconductors products are
not designed, au thorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to result in pe rs onal injury, death or seve re
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefor e s uc h inclusion and/or use is at
the customer’s own risk .
Applications Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use witho ut fu rth e r testing or modificati on .
Limiting values Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values a re s t ress ratings only and
operation of the device at these or an y other conditions
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
Terms and conditions of sale NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any incons istency or conflict betw een information
in this document an d such terms and conditio ns, the latter
will prevail.
No offer to sell or license Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for accept ance or the grant, c onveyance or
implication of any license under any copyrights, patents or
other industr i al or inte llectual property rights.
Export control This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national author ities.
Quick refer ence data The Quick reference data is an
extract of th e product data given in the Limiting values and
Characteristics sections of this docu ment, and as such is
not complete, exhaus tive or legally binding.
NXP Semiconductors
Contact information
For additional information p lease visit: http://www.nxp.com
For sales offices addresses send e-mail to: salesaddresses@nxp.com
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information pr e sent ed in this documen t d oes not form part of any quotation or co nt ract, is believed to be a ccur ate a nd re li a ble and may be chan ged
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Customer notification
This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal
definitions and disclaimer s. No changes were made to the technical content, except for package outline
drawings which were updated to the latest version.
Printed in The Netherlands R75/03/pp14 Date of release: 2004 Jul 30 Document order nu mber: 9397 750 13648