1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608SYCK Super Bright Yellow Features Description z 1.6mmX0.8mm SMT LED, 0.75mm thickness. The Super Bright Yellow device is made with AlGaInP (on z Low power consumption. GaAs substrate) light emitting diode chip. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0931 REV NO: V.11B APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/28/2011 DRAWN: D.M.Su PAGE: 1 OF 5 ERP: 1203001771 Selection Guide Part No. Dice APT1608SYCK Super Bright Yellow (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 21/2 80 150 120 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0931 REV NO: V.11B APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/28/2011 DRAWN: D.M.Su PAGE: 2 OF 5 ERP: 1203001771 Super Bright Yellow APT1608SYCK SPEC NO: DSAD0931 REV NO: V.11B APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/28/2011 DRAWN: D.M.Su PAGE: 3 OF 5 ERP: 1203001771 APT1608SYCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAD0931 REV NO: V.11B APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/28/2011 DRAWN: D.M.Su PAGE: 4 OF 5 ERP: 1203001771 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAD0931 REV NO: V.11B APPROVED: WYNEC CHECKED: Allen Liu APT1608SYCK DATE: DEC/28/2011 DRAWN: D.M.Su PAGE: 5 OF 5 ERP: 1203001771