www.cynergy3.com
© 2017 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO
9001
CERTIFIED
IPS ATS series
Intrinsically Safe, Semi-Flush Mount Pressure Transmitter
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset 21 7BH PE
IPSSAT 2017
Telephone +44 (0) 1202 897969
Email:sales@cynergy3.com
The intrinsically safe, semi-flush mount
pressure transmitter, , has a piezo-IPSSAT
resistive silicon or ceramic pressure
sensor. The sensor is semi-flush to the
housing making this product ideal for
viscous or paste like media. The sensor
and housing are made from stainless steel
to ensure the product is suitable for a wide
range of applications.
The electronics incorporate a
microprocessor-based amplifier, requiring
no adjusting and giving stable electronics
-orespecially in high vibration shock
applications.
Every device is temperature compensated,
calibrated and supplied with a traceable
serial number and calibration data.
Accuracy < 0.2 %
±
5 FS BFSL
Pressure ranges from 100mbar to 100 bar
Pressure reference, Gauge or Absolute
Piezo-resistive sensor, Ceramic or Silicon
Performance
Accuracy (Non-Linearity <±0. % / ( )& Hysteresis) 25 FS BFSL
Setting Errors (offsets) Zero & Full Scale, <±0.5% / FS
Electrical Protection
Supply reverse polarity No damage but also no function
Electromagnetic compatibility CompliantCE
Mechanical Stability
Shock 100g / 11s
Vibration 10g (20 - 2000Hz)RMS
Environment & Thermal Effects
Ambient Range 2 75Temperature - 0ºC to + ºC
Storage temperature -40ºC to + ºC80
Compensated temperature +20ºC to + ºC80
Thermal Zero Shift ( ) <±0.04% / /ºCTZS FS
Thermal Span Shift ( ) <-0.015% /ºCTSS
Permissible environment Zone 0
Material Specifications
Housing Stainless Steel316
“O” ring seals Viton
Diaphragm 316L Stainless Steel or Ceramic
Media wetted parts Housing & process connection, “O” ring
seal, diaphragm
Miscellaneous
Weight Approx 100g
Installation position Any, small zero shift when tilted through 90º
for silicon
Operational Life > 100 x 10 cycles
6
Insulation resistance > 50 hms at 50VdcMO
Approvals
:-
ATEX IECE/x
EII 1G Ex ia IIC T4 Ga (Ta -see schedule)
www.cynergy3.com
© 2017 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
ISO
9001
CERTIFIED
Output Signal and Supply Voltage Wiring Designation
Wire system Output Supply Volts Connection Pin No.
2-wire 4-20mA 10-28Vdc +ve Supply Pin 1
-ve Supply Pin 2
Ground Pin 3
Input Pressure Ranges
Nominal pressure, Gauge, Bar 0.1 0.5 1 2 5 10 20 50 100
Nominal pressure , Absolute Bar - - 1 2 5 10 20 - -*
Nominal pressure , Compound Bar -1 to +1 -1 to +5 -1 to+9 -1 to +19*
Permissible Overpressure Bar 2 2 5 5 10 20 50 100 200
*Ceramic sensor only
IPS ATS series
Intrinsically Safe, Semi-Flush Mount Pressure Transmitter
Part No Sensor type Pressure Range
IPSSAT-G0100-5S Silicon 0-100mbar G (0-1.4psi)
IPSSAT-G0500-5S Silicon 0-500mbar G (0-7.25psi)
IPSSAT-G1000-5S Silicon 0-1000mbar G (0-14.5psi)
IPSSAT-G2000-5C Ceramic 0-2 Bar G (0-29psi)
IPSSAT-G5000-5C Ceramic 0-5 Bar G (0-73psi)
IPSSAT-G1002-5C Ceramic 0-10 Bar G (0-145psi
IPSSAT-G2002-5C Ceramic 0-20 Bar G (0-290psi)
IPSSAT-G5002-5C Ceramic 0-50 Bar G (0-725psi)
IPSSAT-G1003-5C Ceramic 0-100 Bar G(1450psi)
IPSSAT-GM1P1-5C Ceramic -1 to +1 Bar G (-14.5 to + 14.5psi)
IPSSAT-GM1P5-5C Ceramic -1 to +5 Bar G (-14.5 to +73psi)
IPSSAT-GM1P9-5C Ceramic -1 to +9 Bar G (-14.5 to +131psi)
IPSSAT-C0072-5C Ceramic -1 to +19 Bar G (-14.5 to +276psi)
IPSSAT-A1000-5C Ceramic 0-1 Bar Abs (0-14.5psiA)
IPSSAT-A2000-5C Ceramic 0-2 Bar Abs (0-29psiA)
IPSSAT-A5000-5C Ceramic 0-5 Bar Abs (0-73psiA)
IPSSAT-A1002-5C Ceramic 0-10 Bar Abs (0-1345psiA)
