BAV23C-G
www.vishay.com Vishay Semiconductors
Rev. 1.3, 17-May-13 1Document Number: 85866
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Switching Diode, Dual
MECHANICAL DATA
Case: SOT-23
Weight: approx. 8.1 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
FEATURES
• Silicon epitaxial planar diode
• Fast switching dual diode with common cathode
• AEC-Q101 qualified
• Base P/N-G3 - green, commercial grade
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Notes
(1) Measured under pulse conditions; pulse time = tp 0.3 ms
(2) Device on fiberglass substrate
Note
(1) Device on fiberglass substrate
18108_1
12
3
PARTS TABLE
PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
BAV23C-G BAV23C-G3-08 or BAV23C-G3-18 Dual diodes common cathode KT7 Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Continuous reverse voltage VR200 V
Repetitive peak reverse voltage VRRM 250 V
Non-repetitive peak forward current t = 1 μs IFSM 9.0 A
Non-repetitive peak forward surge current t = 1 s IFSM 0.5 A
Maximum average forward rectified current (1) IFAV 200 mA
Forward continuous current (2) IF400 mA
Repetitive peak forward current IFRM 625 mA
Power dissipation (2) Ptot 350 mW
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Thermal resistance junction to ambient air (1) RthJA 357 K/W
Junction temperature Tj150 °C
Storage temperature range Tstg - 65 to + 150 °C
Operating temperature range Top - 55 to + 150 °C
BAV23C-G
www.vishay.com Vishay Semiconductors
Rev. 1.3, 17-May-13 2Document Number: 85866
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Ptot - Admissible Power Dissipation vs. Ambient Temperature
Fig. 2 - IFSM - Non-Repetitive Peak Forward Current vs. Pulse Duration - Maximum Admissible Values of Square Pulses
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Breakdown voltage IR = 100 μA, tp = 300 μs V(BR) 250 V
Forward voltage IF = 100 mA VF1V
IF = 200 mA VF1.25 V
Reverse current VR = 200 V IR100 nA
VR = 200 V, Tj = 150 °C IR100 μA
Dynamic forward resistance IF = 10 mA rf5
Diode capacitance VR = 0 V, f = 1 MHz CD5pF
Reverse recovery time IF = IR = 30 mA, iR = 3 mA,
RL = 100 trr 50 ns
0
50
100
150
200
250
300
350
400
450
500
0 50 100 150
Ptot (mW)
Tamb (°C)
100
10
1
0.1
0.000001 0.00001 0.0001 0.001 0.01 0.1 1
Test pulse tp (s)
IFSM (A)
Tj = 25 °C - prior to surge
BAV23C-G
www.vishay.com Vishay Semiconductors
Rev. 1.3, 17-May-13 3Document Number: 85866
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - VF - Typical Forward Current vs. Forward Voltage vs. Various Temperatures
Fig. 4 - IR - Typical Reverse Current vs. Reverse Voltage vs. Various Temperatures
VF (V)
IF (A)
100.0E-6
1.0E-3
10.0E-3
100.0E-3
1.0E+0
10.0E-6
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Tamb = 75 °C
Tamb = 150 °C
Tamb = 125 °C
Tamb = 100 °C
Tamb = 50 °C
Tamb = 25 °C
VR (V)
IR (A)
1.00E-07
1.00E-06
1.00E-05
1.00E-04
1.00E-03
1.00E-09
1.00E-08
0 50 100 150 200 250 300
Tamb = 75 °C
Tamb = 150 °C
Tamb = 125 °C
Tamb = 100 °C
Tamb = 50 °C
Tamb = 25 °C
BAV23C-G
www.vishay.com Vishay Semiconductors
Rev. 1.3, 17-May-13 4Document Number: 85866
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
Foot print recommendation:
Rev. 8 - Date: 23.Sept.2009
17418
Document no.: 6.541-5014.01-4
0.9 (0.035)
1 (0.039)
0.9 (0.035)
1 (0.039)
1.43 (0.056)
0.45 (0.018)
0.35 (0.014)
2.8 (0.110)
3.1 (0.122)
0.45 (0.018)
0.35 (0.014)
0.45 (0.018)
0.35 (0.014)
0.1 (0.004) max.
2.35 (0.093)
2.6 (0.102)
0.175 (0.007)
0.098 (0.004)
1.15 (0.045)
0.9 (0.035)
1.20 (0.047)
0.95 (0.037) 0.95 (0.037)
2 (0.079)
0.7 (0.028)
0.9 (0.035)
0° to 8°
0.2 (0.008)
0.3 (0.012)
0.5 (0.020)
0.550 ref. (0.022 ref.)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
