BDX54/A/B/C NPN EPITAXIAL SILICON TRANSISTOR POWER DARLINGTON TR HAMMER DRIVERS, AUDIO AMPLIFIERS APPLICATION POWER LINER AND SWITCHING APPLICATIONS Complement to BDX53, BDX53A, BDX53B and BDX53G respectively ABSOLUTE MAXIMUM RATINGS Characteristic Symbol Rating Unit Collector Base Voltage :BDX54 Vesa - 45 Vv : BDX54A - 60 Vv : BDX54B - 80 Vv : BDX54C - 100 Vv Collector Emitter Voltage : BDX54 Voeq - 45 Vv : BDX54A - 60 Vv : BDX54B - 80 Vv : BDX54C - 100 Vv Emitter Base Voltage Vega -5 Vv Collector Current (DC) le -8 A Collector Current (Pulse) Ic -12 A Base Current lb -0.2 A Collector Dissipation (Tc=25C) Po 60 Ww Junction Temperature Ty 150 C Storage Temperature Ts -65 ~ 150 G TO-220 1.Base 2.Collector 3.Emitter ELECTRICAL CHARACTERISTICS (T,=25C) Characteristic Symbol Test Conditions Min | Typ | Max | Unit *Collector Emitter Sustaining Voltage . anyxs4 Veceo{sus) | Ic=- 100mA, lz=0 -45 Vv :BDXS4A -60 Vv : BDX54B - 80 Vv : BDX54C - 100 v Collector Cutoff Current -BDX54 Ica Vop=-45V, le=9 -200] yA BDX5S44 Vop=-60V, E=9 - 200 pA - BDX54B Vop = - 80V, = 0 -200] WA -BDX540 Vep=- 100V, le=0 -200] A Collector Cutoff Current - BDX54 lee Vee = - 22V, Ip= 90 - 500 HA -BDX54A Vee =- 30V, lb= Qo - 500 LA - BDX54B Vee =-40V, p= 0 -500] 9 -BDxX540 Voe =- 50, l= 0 - 500 LA Emitter Cutoff Current lesa Vep=-5V, Ile=0 -2 mA *DC Current Gain Nee Vor =- 3V, Ie=- 3A 750 *Collector Emitter Saturation Voltage Voe{sat) le=- 3A, Ip=- 12mA -2 Vv *Base Emitter Saturation Voltage Voe(sat) lco=- 3A, Ip=- 12mA -25 Vv Parallel Diode Forward Voltage Ve IF=- 3A -18] -25 Vv lF=-8A -25 Vv * Pulse Test: PW=300us, duty Cycle =1.5% Pulsed ed Rev.B FAIRCHILD ee SEMICOINDUCTOR =, 81999 Fairchild Semiconductor Corporation TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx ISOPLANAR CoolFET MICROWIRE CROSSVOLT POP E?CMOS PowerTrench FACT QS FACT Quiet Series Quiet Series FAST SuperSOT-3 FASTr SuperSOT-6 GTo SuperSOT-8 HiSeC TinyLogic DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE GHANGES WITHOUT FURTHER NOTIGE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNGTION OR DESIGN. FAIRGHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or This datasheet contains the design specifications for In Design product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.