EMI Shielding Accessories 440-075 EMI/RFI Banding Adapter Self-Locking Rotatable Coupling - Standard Profile Product Series 440 - Connector Designator F Shell Size (See Table I) Basic Number S - 075 - NF Angle and Profile H - 45 J - 90 S - Straight CONNECTOR DESIGNATOR: A - MIL-DTL-5015 / -26482 / -83723 F - MIL-DTL-38999 Series I, II H - MIL-DTL-38999 Series III and IV 16 Finish (See Table II) 12 - 8 Length* STANDARD PROFILE 1.00 (25.4) Max K P * Length .060 (1.52) Min. Order Length 1.0 Inch (See Note 3) E Typ. (Table I) ROTATABLE COUPLING Polysulfide P - Polysulfide (Omit for None) Cable Termination B - Band K - Precoiled Band (Omit for None) Cable Entry (See Table IV) A Thread (Table I) SELF-LOCKING Length (S Only) (1/2 inch increments e.g. 8 = 4.000 Inches) K** L** **(Table IV) .060 (1.5) Typ. Anti-Rotation Device (Typ.) .380 (9.7) Typ. F H (Table III) (Table III) G (Table III) STYLE 2 (45 & 90 See Note 1) Termination Area Free of Cadmium. Knurl or Ridges Mfr's Option H Band Option (K Option Shown - See Note 4) J (Table III) Length .060 (1.52) Min. Order Length 2.0 Inch Polysulfide Stripes P Option STYLE 2 (STRAIGHT See Note 1) (c) 2008 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com H-20 www.glenair.com EMI Shielding Accessories 440-075 EMI/RFI Banding Adapter Self-Locking Rotatable Coupling - Standard Profile See Page H-2 for Table I: Backshell Interface Dimensions Shell Size Conn. Desig. A-F-L-S 08 10 12 14 16 18 20 22 24 H 09 11 13 15 17 19 21 23 25 TABLE III: ELBOW DIMENSIONS F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max .890 (22.6) .920 (23.4) .940 (23.9) .970 (24.6) .990 (25.1) 1.000 (25.4) 1.020 (25.9) 1.060 (26.9) 1.090 (27.7) TABLE IV: CABLE ENTRY Dash No. 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 32 (c) 2008 Glenair, Inc. K Dia .125 (3.2) .188 (4.8) .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1.062 (27.0) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) L Dia .250 (6.4) .312 (7.9) .375 (9.5) .438 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .688 (17.5) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) 1.062 (27.0) 1.125 (28.6) 1.188 (30.2) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.190 (30.2) 1.250 (31.8) 1.270 (32.3) 1.330 (33.8) 1.410 (35.8) 1.480 (37.6) TABLE II: FINISHES Glenair Symbol Finish B Cadmium Plate, Olive Drab M Electroless Nickel NF Cadmium Plate, Olive Drab over Electroless Nickel MT Ni-PTFE 1000 Hour GreyTM Nickel Fluorocarbon Polymer Consult Factory for Additional Finish Options 1. When maximum cable entry is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. CAGE Codes 06324 H Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com H-21 www.glenair.com