.190" MOUNT PANEL LIGHTS Data Display Products (R) 30 Series - Mounting Hardware Provided 1 Model 305[1] 31 34 - For Detailed LED Data, See Discrete Section, MODEL 125 TO ORDER, FOLLOW THE EXAMPLE: Wires Select one BOLD component from each numbered category in the tables below. W (optional) Model 1 34 LED Voltage 2 -BCR 3 24H 4 Lens Diffusion -C 5 Lens Color R Bezel Color 6 0 Part Number 34-BCR24H-CR0 STANDARD INTENSITY - DIFFUSED ENCAPSULATION 2 LED Color (nm) -BR -BA -BG RED AMB GRN 635 583 565 Voltage/Current pk Iv[2] Viewing V/C (mcd) Angle Table[3] 60 60 60 I I I 14 14 14 MEDIUM INTENSITY - TINTED ENCAPSULATION LED -BCR -BCA -BCG pk Iv[2] Viewing V/C Color (nm) (mcd) Angle Table[3] RED AMB GRN 635 583 565 45 45 45 I I I 60 30 44 pk Iv[2] Viewing LED V/C Color (nm) (mcd) Angle Table[3] -NWR -NWA -NWG -NWB -NWW[6] RED AMB GRN BLU CWHT 634 592 520 465 35/35 35/35 45 45 60 I I II II II Design Max Vf/If Vf/If V/C Table II 5V/15mA 5.5V/23Ma 12V/15mA 14V/20mA 15V/15mA 16.5V/18mA 24V/15mA 26V/18mA 28V/15mA 30V/17mA 48V/9.5mA 50V/10mA 60V/7mA 65V/8mA 120VAC/3.5mA 130VAC/4mA 4 LED -RLP[5] -ALP[5] -GLP[5] -DRG[6] Iv[2] Lens Diffusion -C Clear -N Diffused 5 SPECIALTY LEDs pk Voltage[4] 2 5H 12H 15H 24H 28H 48H 60H 120[8] Voltage/Current HIGH INTENSITY - WATERCLEAR ENCAPSULATION 2180 2180 2000 600 2070 Design Max Vf/If Vf/If V/C Table I 5V/22mA 5.5V/28mA 12V/20mA 14V/25mA 15V/24mA 16.5V/28mA 24V/17mA 26V/20mA 28V/16.5mA 30V/18mA 48V/15mA 50V/16mA 60V/9mA 65V/10mA 120VAC/3.5mA 130VAC/4mA 3 Lens Color R Red B Blue A Amber W Water Clear Y Yellow Viewing V/C Color (nm) (mcd) Angle Table[3] RED AMB GRN RED/GRN 635 583 565 635/567 2.1 1.6 2.1 4.3/3.7 50 50 50 118 [3] [3] [3] I -S Smoke[7] G Green Description Low Power Low Power Low Power Bi-Color, Red Cathode 6 Bezel Color 0 Black 9 White [1] Model 305 has no lens. Omit Lens Diffusion and Color (e.g. 305-NWG5H-0). [2] Iv = typical luminous intensity @ If = 20mA(Ta =25C). Iv is measured without lenses. For Low Power LEDs, If = 2mA. For Bi-color LEDs, lf=10mA. [3] See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA. [4] Ta = 25C. Voltage "2" indicates external resistor required. Voltages 5H through 60H are VDC. For AC operation, insert D after Voltage (e.g. 24HD). D indicates built-in rectifier; not required for 5H or 120VAC or greater. DC operation not available for 120V. Bi-Color not available in AC voltages. 40 [5] Omit H when selecting a voltage (e.g. 31-RLP12). [6] Select -CW or -NW lens only. [7] Omit Lens Diffusion when selecting smoked lens (e.g. 31-NWG28H-SO). [8] Select high intensity LEDs only. 445 S. Douglas Street, El Segundo, CA 90245-4630 * (800) 421-6815 * (310) 640-0442 * FAX (310) 640-7639 ww w.datadisplay.com (c) 2005 Data Display Products Data Display Products (R) .190" MOUNT PANEL LIGHTS 30 Series 305 (no lens) 31 34 (flush lens) TC3 & NW3, Mounting Hardware Standard Wire Leads: 6.0" total length(nominal)/.50" stripped (nominal), red anode/black cathode, 24 AWG TPB UL1061 insulation. Contact factory for other lengths, gauges and colors. All dimensions are in inches (mm) Tolerances: .xx"(.x) .025"(.63) / .xxx"(.xx).010"(.25) Specifications are subject to change without notice. 445 S. Douglas Street, El Segundo, CA 90245-4630 * (800) 421-6815 * (310) 640-0442 * FAX (310) 640-7639 ww w.datadisplay.com (c) 2005 Data Display Products 41