Voltage/Current
Design Max
Vf/If Vf/If
V/C Table II
5V/15mA 5.5V/23Ma
12V/15mA 14V/20mA
15V/15mA 16.5V/18mA
24V/15mA 26V/18mA
28V/15mA 30V/17mA
48V/9.5mA 50V/10mA
60V/7mA 65V/8mA
120VAC/3.5mA 130VAC/4mA
Voltage/Current
Design Max
Vf/If Vf/If
V/C Table I
5V/22mA 5.5V/28mA
12V/20mA 14V/25mA
15V/24mA 16.5V/28mA
24V/17mA 26V/20mA
28V/16.5mA 30V/18mA
48V/15mA 50V/16mA
60V/9mA 65V/10mA
120VAC/3.5mA 130VAC/4mA
445 S. Douglas Street, El Segundo, CA 90245-4630 • (800) 421-6815 • (310) 640-0442 • FAX (310) 640-7639
www.datadisplay.com
© 2005 Data Display Products
40
Data Display Products®
.190" MOUNT PANEL LIGHTS
30 Series
- Mounting Hardware Provided - For Detailed LED Data, See Discrete Section, MODEL 125
SPECIALTY LEDs
STANDARD INTENSITY - DIFFUSED ENCAPSULATION
TO ORDER, FOLLOW THE EXAMPLE:
Voltage[4]
2
5H
12H
15H
24H
28H
48H
60H
120[8]
Lens
Diffusion
-C
Clear
-N
Diffused
Bezel
Color
0
Black
9
White
Lens Lens Bezel
Model LED Voltage Diffusion Color Color
34 -BCR 24H -C R 0
LED
-RLP[5]
-ALP[5]
-GLP[5]
-DRG[6]
Color
RED
AMB
GRN
RED/GRN
Viewing
Angle
50
50
50
118
V/C
Table[3]
[3]
[3]
[3]
I
Description
Low Power
Low Power
Low Power
Bi-Color, Red Cathode
LED
-BR
-BA
-BG
Color
RED
AMB
GRN
Viewing
Angle
60
60
60
V/C
Table[3]
I
I
I
Iv[2]
(mcd)
14
14
14
λpk
(nm)
635
583
565
2
MEDIUM INTENSITY - TINTED ENCAPSULATION
LED
-BCR
-BCA
-BCG
Color
RED
AMB
GRN
Viewing
Angle
45
45
45
V/C
Table[3]
I
I
I
Iv[2]
(mcd)
60
30
44
λpk
(nm)
635
583
565
HIGH INTENSITY - WATERCLEAR ENCAPSULATION
LED
-NWR
-NWA
-NWG
-NWB
-NWW[6]
Color
RED
AMB
GRN
BLU
CWHT
Viewing
Angle
35/35
35/35
45
45
60
V/C
Table[3]
I
I
II
II
II
Iv[2]
(mcd)
2180
2180
2000
600
2070
λpk
(nm)
634
592
520
465
Iv[2]
(mcd)
2.1
1.6
2.1
4.3/3.7
λpk
(nm)
635
583
565
635/567
3
4
Lens Color
R Red
A Amber
Y Yellow
GGreen
5
6
BBlue
WWater
Clear
-S
Smoke[7]
1234 5 6
Select one BOLD component from each numbered category in the tables below.
Part Number 34-BCR24H-CR0
➜
Model Wires
305[1] W
31 (optional)
34
1
[1] Model 305 has no lens. Omit Lens Diffusion and Color (e.g. 305-NWG5H-0).
[2] Iv = typical luminous intensity @ If = 20mA(Ta =25°C). Iv is measured without lenses.
For Low Power LEDs, If = 2mA. For Bi-color LEDs, lf=10mA.
[3] See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA.
[4] Ta = 25°C. Voltage "2" indicates external resistor required. Voltages 5H through 60H are VDC.
For AC operation, insert D after Voltage (e.g. 24HD). D indicates built-in rectifier; not required for
5H or 120VAC or greater. DC operation not available for 120V. Bi-Color not available in
AC voltages.
[5] Omit H when selecting a voltage (e.g. 31-RLP12).
[6] Select -CW or -NW lens only.
[7] Omit Lens Diffusion when selecting smoked lens (e.g. 31-NWG28H-SO).
[8] Select high intensity LEDs only.
445 S. Douglas Street, El Segundo, CA 90245-4630 • (800) 421-6815 • (310) 640-0442 • FAX (310) 640-7639
www.datadisplay.com
© 2005 Data Display Products
41
Data Display Products®
.190" MOUNT PANEL LIGHTS
30 Series
305 (no lens) 31
34 (flush lens) TC3 & NW3, Mounting Hardware
Standard Wire Leads:
6.0" total length(nominal)/.50" stripped (nominal), red
anode/black cathode, 24 AWG TPB UL1061 insulation.
Contact factory for other lengths, gauges and colors.
All dimensions are in inches (mm)
Tolerances: .xx"(.x) ±.025"(.63) / .xxx"(.xx)±.010"(.25)
Specifications are subject to change without notice.
