MCO 600 High Power Single Thyristor Modules VRSM V 1700 1900 2100 2300 VRRM V 1600 1800 2000 2200 IFRMS = 928 A IFAVM = 600 A VRRM = 1600-2200 V 3 Type 54 2 MCO 600-16io1 MCO 600-18io1 MCO 600-20io1 MCO 600-22io1 E72873 Symbol Conditions ITRMS ITAV TVJ = TVJM 180 sine ITSM TVJ = 45C; VR = 0 t = 10 ms t = 8.3 ms TVJ = TVJM; VR = 0 I2t (di/dt)cr Maximum Ratings TC = 25C TC = 85C 928 600 A A (50 Hz) (60 Hz) 15000 16000 A A t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 13000 14400 A A TVJ = 45C; VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 1 125 000 1 062 000 A2s A2s TVJ = TVJM; VR = 0 t = 10 ms t = 8.3 ms (50 Hz) (60 Hz) 845 000 813 000 A2s A2s 100 A/s 500 A/s 1000 V/s 120 60 30 W W W TVJ = TVJM; repetitive, IT = 960 A f = 50 Hz; tp = 200 s; VD = 2/3 VDRM; IG = 1 A; diG /dt = 1 A/s non repetitive, IT = ITAVM * Direct Copper Bonded Al2O3 ceramic with copper base plate * Planar passivated chips * Isolation voltage 3600 V~ * UL registered * Keyed gate/cathode twin pins Applications * Motor control, soft starter * Power converter * Heat and temperature control for industrial furnaces and chemical processes * Lighting control *L Advantages (dv/dt)cr TVJ = TVJM; VD = 2/3 VDRM; RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM; tp = 30 s IT = IT(AV)M; tp = 500 s PGAV Features VRGM 10 V TVJ TVJM Tstg -40...+140 140 -40...+125 C C C 3000 3600 V~ V~ 4.5 - 7 11-13 Nm Nm 650 g VISOL 50/60 Hz, RMS IISOL < 1 mA Md Mounting torque (M6) Terminal connection torque (M8) Weight Typical including screws t = 1 min t=1s * Improved temperature & power cycling * Reduced protection circuits Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. (c) 2012 IXYS All rights reserved 20121206e 1-4 MCO 600 Symbol Conditions Characteristic Values typ. IRRM VR = VRRM TVJ = TVJM max. 60 mA VT IT = 600 A TVJ = 25C 1.15 V VT0 rt For power-loss calculations only TVJ = TVJM 0.77 0.42 V mW VGT VD = 6 V VD = 6 V TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 2 3 300 400 V V mA mA VGD IGD VD = 2/3 VDRM; TVJ = TVJM 0.25 10 V mA IL tp = 30 s; VD = 6 V IG = 1 A; diG /dt = 1 A/s TVJ = 25C 400 mA IH VD = 6 V; RGK = ; TVJ = 25C 300 mA tgd VD = 1/2VDRM IG = 1 A; diG /dt = 1 A/s TVJ = 25C 2 s tq VD = 2/3 VDRM dv/dt = 50 V/s; -di/dt = 10 A/s IT = 500 A; VR = 100 V; tp = 200 s TVJ = TVJM RthJC RthJK DC current DC current dS dA a Creeping distance on surface Creepage distance in air Maximum allowable acceleration IGT IXYS reserves the right to change limits, test conditions and dimensions. (c) 2012 IXYS All rights reserved 350 s 0.065 0.085 K/W K/W 12.7 9.6 50 mm mm m/s2 20121206e 2-4 MCO 600 Dimensions in mm (1 mm = 0.0394") 43 49 35 28.5 50 4567 22.5 2 5 38 52 +0 -1,4 M8 x20 3 6.2 80 92 Optional accessories for modules Keyed gate/cathode twin plugs with wire length = 350 mm, gate = white, cathode = red Type ZY 180L (L = Left for pin pair 4/5) Type ZY 180R (R = Right for pin pair 6/7) UL 758, style 3751 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2012 IXYS All rights reserved 20121206e 3-4 MCO 600 3000 W RthKA K/W 2500 0.02 0.04 0.07 0.1 0.15 0.2 0.3 Ptot 2000 1500 Circuit W3 3xMCC312 or 3xMCD312 1000 500 0 0 200 400 600 A 0 25 50 75 100 IRMS 125 C 150 TA RthJC for various conduction angles d: d RthJC [K/W] DC 0.065 180 0.069 120 0.073 60 0.083 30 0.1 0.10 ZthJC 0.05 30 60 120 180 DC [K/W] 0.00 0.001 0.01 0.1 1 10 100 Constants for ZthJC calculation: ti [s] i Rthi [K/W] 1 0.0031 0.00054 2 0.0168 0.098 3 0.039 0.54 4 0.0061 12 t [s] Fig. 1 Transient thermal impedance junction to case 0.15 RthJK for various conduction angles d: d RthJK [K/W] DC 0.085 180 0.089 120 0.093 60 0.102 30 0.119 0.10 ZthJK [K/W] 30 60 120 180 DC 0.05 0.00 0.001 0.01 0.1 t [s] 1 10 100 Constants for ZthJK calculation: ti [s] i Rthi [K/W] 1 0.0031 0.00054 2 0.0168 0.098 3 0.039 0.54 4 0.0061 12 5 0.02 12 Fig. 2 Transient thermal impedance junction to heatsink IXYS reserves the right to change limits, test conditions and dimensions. (c) 2012 IXYS All rights reserved 20121206e 4-4