Important notice
Dear Customer,
On 7 February 2017 the former NXP Standard Product business became a new company with the
tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS
semiconductors with its focus on the automotive, industrial, computing, consumer and wearable
application markets
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use
the references to Nexperia, as shown below.
Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,
use http://www.nexperia.com
Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use
salesaddresses@nexperia.com (email)
Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on
the version, as shown below:
- © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights
reserved
Should be replaced with:
- © Nexperia B.V. (year). All rights reserved.
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail
or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and
understanding,
Kind regards,
Team Nexperia
DATA SH EET
Product data sheet
Supersedes data of 2001 Oct 10 2003 Mar 20
DISCRETE SEMICONDUCTORS
BAS29; BAS31; BAS35
General purpose controlled
avalanche (double) diodes
db
ook, halfpage
M3D088
2003 Mar 20 2
NXP Semiconductors Product data sheet
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
FEATURES
Small plastic SMD package
Switching speed: max. 50 ns
General application
Continuous reverse voltage: max. 90 V
Repetitive peak reverse voltage: max. 110 V
Repetitive peak forward current: max. 600 mA
Repetitive peak reverse current: max. 600 mA.
APPLICATIONS
General purpose s witc hing in e.g. surface mounte d
circuits.
DESCRIPTION
General purpos e switching diodes fabric ated in planar
technology, and encapsulated in small rectangular plastic
SMD SOT23 packages. The BAS29 consists of a single
diode. The BAS31 has two diodes in series. The BAS35
has two diodes with a common anode.
MARKING
Note
1. = p : Made in Hong Kong.
= t : Made in Malaysia.
= W : Made in China.
PINNING
TYPE NUMBER MARKING CODE(1)
BAS29 L20 or A8
BAS31 L21 or V1
BAS35 L22 or V2
PIN DESCRIPTION
BAS29 BAS31 BAS35
1anode anode cathode (k1)
2not connected cathode cathode (k2)
3cathode common
connection common
anode
handbook, halfpage
21
3
a. Simplified outline. c. BAS31 diode.
b. BAS29 diode. d. BAS35 diode.
MAM233
12
3
12
3
1
2
n.c.
3
Fig.1 Simplified outline (SOT23) and symbols.
2003 Mar 20 3
NXP Semiconductors Pr oduct dat a shee t
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
LIMITING VALUES
In accordance with th e Absolute Maximum Ratin g S ystem (IEC 60134).
Note
1. Device mounted on an FR4 printed-circuit board.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
Per diode
VRRM repetitive peak reverse voltage 110 V
VRcontinuous revers e voltage 90 V
IFcontinuous forward current single diode loaded; se e Fig.2;
note 1 250 mA
double diode load ed; s ee Fig.2;
note 1 150 mA
IFRM repetitive peak forward current 600 mA
IFSM non-repetitive peak forward current square wave; Tj = 25 °C prior to
surge; see Fig.4
t = 1 µs10 A
t = 100 µs4 A
t = 1 s 0.75 A
Ptot total power dissipation Tamb = 25 °C; note 1 250 mW
IRRM repetitive peak reverse current 600 mA
ERRM repetitive peak reverse energy tp 50 µs; f 20 Hz; Tj = 25 °C5mJ
Tstg storage temperature 65 +150 °C
Tjjunction temperature 150 °C
2003 Mar 20 4
NXP Semiconductors Pr oduct dat a shee t
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
ELECTRICAL CHARACTERISTIC S
Tj = 25 °C unless otherwise specified.
THERMAL CHARACTE RISTICS
Note
1. Device mounted on an FR4 printed-circuit board.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
Per diode
VFforward voltage see Fig.3
IF = 10 mA 750 mV
IF = 50 mA 840 mV
IF = 100 mA 900 mV
IF = 200 mA 1 V
IF = 400 mA 1.25 V
IRreverse current see Fig.5
VR = 90 V 100 nA
VR = 90 V; Tj = 150 °C100 µA
V(BR)R reverse avalanche breakdown
voltage IR = 1 mA 120 170 V
Cddiode capacit an ce f = 1 MHz; VR = 0; see Fig.6 35 pF
trr reverse recove ry time when switched from IF = 30 mA to
IR = 30 mA; RL = 100 ; measured
at IR = 3 mA; see Fig.7
50 ns
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth j-tp thermal resistance from junction to tie-point 360 K/W
Rth j-a thermal resistance from junction to ambient note 1 500 K/W
2003 Mar 20 5
NXP Semiconductors Pr oduct dat a shee t
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
GRAPHICAL DATA
Device mounted on an FR4 printed-circuit board.
(1) Single diode loaded.
(2) Double diode loaded.
handbook, halfpage
0 100
(1)
(2)
200
300
200
0
100
MBG440
Tamb (oC)
IF
(mA)
Fig.2 Maximum permissible continuou s for wa rd
current as a func tion of ambient
temperature. Fig.3 Forward current as a function of forward
voltage.
handbook, halfpage
02
600
0
200
400
MBH280
1
IF
(mA)
VF (V)
(1) (2) (3)
(1) Tj = 150 °C; typical values.
(2) Tj = 25 °C; typical values.
(3) Tj = 25 °C; maximum values.
handbook, full pagewidth
MBH327
10 tp (µs)
1
IFSM
(A)
102
101104
102103
10
1
Fig.4 Maximum permissible non-repetitive peak forward current as a function of p uls e duration.
Based on square wave currents.
Tj = 25 °C prior to surge.
2003 Mar 20 6
NXP Semiconductors Pr oduct dat a shee t
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
Fig.5 Reverse current as a function of junc tion
temperature.
handbook, halfpage
10
200
0
MBH282
100 Tj (
o
C)
IR
(µA)
1
10
2
10
1
10
2
(1) (2)
(1) VR = 90 V; maximum values.
(2) VR = 90 V; typical values.
Fig.6 Diode capacitance as a function of reverse
voltage; typical values.
f = 1 MHz; Tj = 25 °C.
handbook, halfpage
0102030
VR (V)
40
Cd
(pF)
30
10
0
20
MGD003
handbook, full pagewidth
trr
(1)
IFt
output signal
trt
tp
10%
90%
VR
input signal
V = V I x R
RF S
R = 50
SIF
D.U.T.
R = 50
i
SAMPLING
OSCILLOSCOPE
MGA881
Fig.7 Reverse reco very voltage test circuit and waveforms.
(1) IR = 3 mA.
2003 Mar 20 7
NXP Semiconductors Pr oduct dat a shee t
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
PACKAGE OUTLINE
UNIT A1
max. bpcDE e1HELpQwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
97-02-28
99-09-13
IEC JEDEC EIAJ
mm 0.1 0.48
0.38 0.15
0.09 3.0
2.8 1.4
1.2 0.95
e
1.9 2.5
2.1 0.55
0.45 0.1
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT23 TO-236AB
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
wM
vMA
B
AB
0 1 2 mm
scale
A
1.1
0.9
c
X
12
3
Plastic surface mounted package; 3 leads SOT2
3
2003 Mar 20 8
NXP Semiconductors Pr oduct dat a shee t
General purpose controlled avalanche
(double) diodes BAS29; BAS31; BAS35
DATA SHEET STATUS
Notes
1. Please consult the most recently issued document before initiating or completing a design.
2. The product s ta tus of device(s ) described in this document may have changed since this document was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DOCUMENT
STATUS(1) PRODUCT
STATUS(2) DEFINITION
Objective data sheet Development This document contains data from the objective specification for pro duct
development.
Preliminary data sheet Qualification This document contains data from the preliminary specification.
Product data sheet Production T his document contains the product specification.
DISCLAIMERS
General Information in this document is believed to be
accurate and reliable . H ow ev er, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequenc es of use of such information.
Right to make changes NXP Semiconductors
reserves the right to make changes to information
published in this doc ument, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Suitability for use NXP Semiconductors products are
not designed, au thorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to result in pe rs onal injury, death or seve re
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefor e s uc h inclusion and/or use is at
the customer’s own risk .
Applications Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use witho ut fu rth e r testing or modificat ion .
Limiting values Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values a re s t ress ratings only and
operation of the device at these or an y other conditions
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
Terms and conditions of sale NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any incons istency or conflict betw een information
in this document an d such terms and conditio ns, the latter
will prevail.
No offer to sell or license Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for accept ance or the grant, c onveyance or
implication of any license under any copyrights, patents or
other industr i al or inte llectual property rights.
Export control This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national author ities.
Quick refer ence data The Quick reference data is an
extract of th e product data given in the Limiting values and
Characteristics sections of this docu ment, and as such is
not complete, exhaus tive or legally binding.
NXP Semiconductors
Contact information
For additional information p lease visit: http://www.nxp.com
For sales offices addresses send e-mail to: salesaddresses@nxp.com
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information pr e sent ed in this documen t d oes not form part o f an y q uot ation or co ntract, is believed to b e a ccur ate a nd reliable and may be change d
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Customer notification
This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were
made to the content, except for the legal definitions and disclaimers.
Printed in The Netherlands 613514/05/pp9 Date of release: 2003 Mar 20 Document order number: 9397 750 10962