RSK 33N www.vishay.com Vishay Sfernice Wirebondable Dual Value Thin Film Chip Resistor Networks, Center Tap FEATURES * Low TCR < 25 ppm/C * Rapid Rise Time * Low Noise < - 35 dB Actual Size * High temperature version (up to 230 C) see RMKHT DESIGN SUPPORT TOOLS click logo to get started * Wirebondable * Stability 0.03 % (2000 h, rated power, at + 70 C) Models * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available The Vishay RSK33 resistive dividers are based on a nickel-chromium thin metal film formulation on an oxidized silicon substrate and incorporate two resistors of equal ohmic value for use either as a precision voltage divider or as a four terminal resistor. The RSK33 micro dividers were developed as a low cost, temperature and time stable resistive range for hybrid circuit applications demanding miniaturization with improved parametric performances in both industrial and military environments. SCHEMATIC RT R1 R2 RT = R1 + R2 with R1 = R2 Their close ratio tolerance and TCR tracking performances are particularly relevant to amplifier gain-setting and diverse attenuator and terminator applications. (Unequal value on request) STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE (1) POWER RATING P70 C W ABSOLUTE TOLERANCE % RSK 33N 0303 10 to 500K 0.250 0.5, 1, 2 RATIO TOLERANCE % (2) 0.05, 0.1, 0.5 ABSOLUTE TCR (3) ppm/C RATIO TCR ppm/C 15, 25 5 Notes (RT = R1 + R2) (2) R > 10 . Tighter on request: Please consult (ohmic range may vary) (3) 25 ppm/C maximum, 15 ppm/C maximum at -55 C to +155 C (1) Rated Power in % DERATING CLIMATIC SPECIFICATIONS 100 Operating temperature range -55 C to +155 C Storage temperature range -55 C to +155 C 80 60 40 20 0 0 25 50 75 100 125 150 175 Ambient Temperature in C Revision: 25-Jan-18 Document Number: 60069 1 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RSK 33N www.vishay.com Vishay Sfernice PERFORMANCES TEST SPECIFICATIONS Extended ohmic range > 500 k to 1 M CONDITIONS RT RT R 1 = R 2 R T = ------- + ------- 2 2 R1 R2: Please consult Stability 300 ppm typical Voltage coefficient 2000 h Pn at +70 C < 0.01 ppm/V Limiting voltage 100 VDC on RT Noise < -35 dB typical Thermal EMF MIL-STD-202 method 308 < 0.01 V/C Shelf life stability 50 ppm 1 year DIMENSIONS DIMENSION B Bonding Pad Area D A INCHES MILLIMETERS A 0.033 0.004 0.855 0.10 B 0.033 0.004 0.855 0.10 C 0.01 to 0.015 0.25 to 0.40 D 0.006 0.15 E 0.004 0.10 F 0.006 0.15 E C F MECHANICAL SPECIFICATIONS Resistive element Passivated nichrome Passivation Silicon nitride Substrate material Silicon Bonding pads Aluminum, gold on request GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RSK33N5KD25KB0099 (preferred part number format) R S GLOBAL MODEL Revision: 25-Jan-18 K 3 3 N 5 K D 2 5 K B 0 0 9 9 R1 VALUE ABS. TOLERANCE R2 VALUE RAT. TOLERANCE OPTION Decimal R, K, or M D = 0.5 % F = 1.0 % G = 2.0 % Decimal R, K, or M D = 0.5 % B = 0.1 % W = 0.05 % Leave blank if no option Document Number: 60069 2 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000