EXB250 Series Single output DC-DC CONVERTERS 72-165 W High Efficiency DC-DC Converters 1 * High efficiency topology, 90% typical at 3.3 V * Industry standard footprint * Wide baseplate temperature, -40 C to +100 C (natural convection) * 90% to 110% output trim * No minimum load * Overvoltage protection * Remote ON/OFF * Available RoHS compliant The EXB250 is a new high efficiency, open-frame, isolated 165 Watt converter series in an industry standard half-brick footprint. The EXB250 delivers very high output current at low voltages, and excellent useable power density for today's high end applications. The design takes advantage of open frame construction to provide a low weight, low thermal impedance baseplate design. The seven models in the series feature an input voltage range of 33 Vdc to 75 Vdc and are available in output voltages of 12 V, 5 V, 3.3 V, 2.5 V, 1.8 V, 1.5 V and 1.2 V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 90% for the 3.3 V, 88% for the 2.5 V and 87% for the 1.8 V version. The EXB250 series also has a remote ON/OFF capability. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 (TUV Rheinland) and UL/cUL1950, the EXB250 reduces compliance costs and time to market. TUV 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability 90% to 110% Set point accuracy 1.6% max. Line regulation Low line to high line 1.2 V model All other models 0.2% max. 0.1% max. Load regulation Full load to min. load 0.2% max. Minimum load 0% Conducted emissions EN55022 (See Note 2) EN55022 (See Note 2) Immunity: ESD air ESD contact Radiated field enclosure Conducted (DC power) Conducted (signal) Input transients EN61000-4-2 8 kV (NP), 15 kV EN61000-4-2 6 kV (NP), 8 kV EN61000-4-3 10 V/m EN61000-4-6 10 V EN61000-4-6 10 V ETS 300 132-2, ETR 283 Overshoot At turn-on and turn-off None GENERAL SPECIFICATIONS Undershoot 1.2 V, 1.5 V (Z), 1.8 V (Z), 2.5 V (Z) and 3.3 V (Z) models None Efficiency Ripple and noise 5 Hz to 20 MHz Transient response (See Note 1) 60 mV pk-pk 20 mV rms 6% max. deviation 150 s recovery to within total error band Input/output Input/baseplate Switching frequency Fixed Input voltage range 48 Vin nominal Weight Input current No load Remote OFF Input current (max.) (See Note 3) Input reflected ripple 33-75 Vdc 145 mA max. 35 mA max. MTBF 5.7 A max. @ Io max. and Vin = 33-75 Vdc (See Note 5) Active high remote ON/OFF Logic compatibility ON OFF 350 mA (pk-pk) typ. Undervoltage lockout Power up Power down 32.5 V (typ.) 30.5 V (typ.) Start-up time (See Note 6) Power up Remote ON/OFF 10 ms (typ.) 3 ms (typ.) EN60950 (TUV Rheinland) UL/cUL1950 UL94V-0 73 g (2.6 oz) Telcordia SR-332 @ 25 C, 100% load ground benign Demonstrated 1,598,243 hours >2,000,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Open collector ref to -input Open circuit or >4.0 Vdc <1.2 Vdc 1500 Vdc 1500 Vdc 400 kHz typ. Approvals and standards (See Note 4) Material flammability (NP) (NP) (NP) (NP) (NP) See table Operational INPUT SPECIFICATIONS Level A Level B Operating baseplate -40 C to +100 C temperature Non-operating -40 C to +125 C File Name: exb250s.pdf Rev (02): 06 Dec 2005 EXB250 Series Single output DC-DC CONVERTERS 72-165 W High Efficiency DC-DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (8,9) 72 W 33-75 Vdc 1.44 Vdc 1.2 V 0A 60 A 84.0% 0.2% 0.2% EXB250-48S1V2J 90 W 33-75 Vdc 1.8 Vdc 1.5 V 0A 60 A 85.5% 0.1% 0.2% EXB250-48S1V5J 108 W 33-75 Vdc 2.2 Vdc 1.8 V 0A 60 A 87.0% 0.1% 0.2% EXB250-48S1V8J 150 W 33-75 Vdc 3 Vdc 2.5 V 0A 60 A 88.0% 0.1% 0.2% EXB250-48S2V5J 165 W 33-75 Vdc 4 Vdc 3.3 V 0A 50 A 90.0% 0.1% 0.2% EXB250-48S3V3J 165 W 33-75 Vdc 6 Vdc 5V 0A 33 A 91.7% 0.1% 0.2% EXB250-48S05J 165 W 33-75 Vdc 14.4 Vdc 12 V 0A 13.75 A 92.0% 0.1% 0.2% EXB250-48S12J Part Number System with Options EXB250-48S1V2-ZRNJ RoHS Compliance (8,9) J = Pb-free (RoHS 6/6 compliant) EX = Open Frame, Through Hole B = 1/2 Brick Pin Length of Standard Product Blank = 0.210 " (5.33 mm) Pin Length of Modified Standard Products N = 0.145 " (3.68 mm) K = 0.110 " (2.79 mm) Output Wattage Class 250 = 250 Watts Input Voltage 48 = 48 Volts (33 Vdc to 75 Vdc range) Control Logic Blank = Positive R = Negative Number of Outputs S = Single Blank = Standard Product Z = Zero Undershoot, Soft Turn-off Characteristic (Applies to 1.5 V, 1.8 V, 2.5 V and 3.3 V models only) Output Voltage 1V2 = 1.2 V, 1V5 = 1.5 V etc Notes 1 2 3 4 5 6 7 8 9 REGULATION di/dt = 0.1 A/s, Vin = 48 Vdc, Tc = 25 C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. The EXB250 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. See Application Note 119. Recommended input fusing is a 10 A HRC 200 V rated fuse. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Measured with no external Pi filter. Significant reduction possible with external filter. See Application Note 119. Start-up into resistive load. For the pin length of Modified Standard products please consult the factory. The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. PROTECTION Short circuit Continuous Overvoltage Non-latching clamp TELECOM SPECIFICATION Central office interface A ETS300-132-2 input voltage and current requirements CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. File Name: exb250s.pdf Rev (02): 06 Dec 2005 EXB250 Series Single output DC-DC CONVERTERS 72-165 W High Efficiency DC-DC Converters 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm O0.040 (7 PLS) O0.080 (2 PLS) 4 1.700 [43.18] 1.300 [33.02] 1.000 [25.40] 0.700 [17.78] 0.300 [7.62] 0.000 [0.00] 5 6 BOTTOM 7 VIEW 8 2 3 9 1 0.500 [12.70] *0.21 [5.33] M3x0.5 Threaded Through (4 PLS) *Standard available pin length. 0.145 (3.68) and 0.110 (2.79) options also available. (See Notes 8 and 9 for ordering details). 2.280 [57.91] 2.000 [50.80] 2.400 [60.96] TOP VIEW 0.200 [5.08] 0.190 [4.83] 1.900 [48.26] O0.128 [O3.25] (4 PLS) O0.094 [O2.39] (2 PLS) 0.000 [0.00] 0.300 [7.62] 1 9 0.700 [17.78] 2 1.300 [33.02] 1.700 [43.18] 3 8 7 6 4 5 O0.054 [O1.37] (7 PLS) 1.000 [25.40] ALL DIMENSIONS IN INCHES [mm] Recommended Hole Pattern PIN CONNECTIONS PIN NUMBER FUNCTION 1 +Vin 2 Remote On/Off 3 No Function 4 -Vin 5 -Vout 6 -Sense 7 Trim 8 +Sense 9 +Vout International Safety Standard Approvals UL/cUL : UL1950 File No. E135734 TUV TUV Rheinland File No. 10401-336-0209. Licence No. 40013414 CB Scheme No.DE1-32227 Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: exb250s.pdf Rev (02): 06 Dec 2005