33
40 Watt Medical
l 3 x 2 x 0.75 Inches Form factor
l 40 Watts Convection
l Approval to EN60601 3rd Edition
l Efficiencies 85% Typical
l -40 to 70 degree operating temperature*
l Dual fusing
l 2m Hours, Telcordia -SR332-issue 3 MTBF
l No Load Power < 0.3W
l Medical (BF) Safety Approvals
l Meets standard IEC60601-1-2 : 2014 (4th Edition)
Features
Input Voltage 85-264 VAC/390 VDC, Universal
Input Frequency 47
-
63 Hz
Input Current 115 VAC: 0.8 A max. 230 VAC: 0.4 A max.
No Load Power less than 0.3W typical
Inrush Current 115 VAC – 25 A, 230 VAC – 45 A, 264 VAC – 75 A
Leakage Current 300 uA Typical, (N.A. For Class II Option) Touch current <100uA
Efficiency 85% Typical
Hold-up Time 40W:60 ms @230VAC
Output Power 40W Convection Cooling
Line Regulation
+/-0.5%
Load Regulation
+/-1%
Transient Response 25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50/60Hz,max excursion 4%,
recovery time 5mS.
Rise Time 50ms typical
Set Point Tolerance
2% (3% for 5V model)
Over Current Protection >110%
Over Voltage Protection 110 to 140%
Short Circuit Protection Hiccup mode
Switching Frequency 65 KHz Typical
Operating Temperature4 - 40 to +70°C, * -40 to 0°C startup is guaranteed with spec deviation
Storage Temperature
-
40 to
+
85°C
Relative Humidity 5% to 95%, noncondensing
Altitude Operating: 16,000 ft.; Nonoperating: 40,000 ft.
MTBF 2m Hours, Telcordia -SR332-issue 3
Isolation Voltage Input to Output – 4000 VAC medical applications.
Input to GND - 1500 VAC (Not Applicable For Class II Option)
Output to GND- 1500VAC for type BF , 500 VAC for type B (Not Applicable For Class II Option)
Electrical Specifications
4EM-19-180 39-DE60-44850-002 / A6
Innovaons in Power
2
J1 Option 1 & 3 Pin 1 AC LINE
Pin 2 NOT FITTED
Pin 3 AC NEUTRAL
J2 Option 1 & 3 Pin 1,2 V1 +VE
Pin 3,4 V1 -VE
Connectors
MULP40-1305 with Header 5 V 5A 0.0 A 1.5%
MULP40-1312 with Header 12 V 3.33A 0.0 A 1%
MULP40-1315 with Header 15 V 2.67A 0.0 A 1%
MULP40-1324 with Header 24 V 1.67A 0.0 A 1%
MULP40-1330 with Header 30 V 1.33A 0.0 A 1%
MULP40-1348 with Header 48 V 0.83A 0.0 A 1%
MULP40-1358 with Header 58 V 0.69A 0.0 A 1%
MULP40-CK metal cover kit accessory
Model Number Description Voltage Max. Load Min. Load Ripple1
MULP40-1005 with Screw Terminal 5 V 5A 0.0 A 1.5%
MULP40-1012 with Screw Terminal 12 V 3.33A 0.0 A 1%
MULP40-1015 with Screw Terminal 15 V 2.67A 0.0 A 1%
MULP40-1024 with Screw Terminal 24 V 1.67A 0.0 A 1%
MULP40-1030 with Screw Terminal 30 V 1.33A 0.0 A 1%
MULP40-1048 with Screw Terminal 48 V 0.83A 0.0 A 1%
MULP40-1058 with Screw Terminal 58 V 0.69A 0.0 A 1%
MULP40-CK metal cover kit accessory
Model Number Description Voltage Max. Load Min. Load Ripple1
MULP40-1205 with PCB Mounting 5 V 5A 0.0 A 1.5%
MULP40-1212 with PCB Mounting 12 V 3.33A 0.0 A 1%
MULP40-1215 with PCB Mounting 15 V 2.67A 0.0 A 1%
MULP40-1224 with PCB Mounting 24 V 1.67A 0.0 A 1%
MULP40-1230 with PCB Mounting 30 V 1.33A 0.0 A 1%
MULP40-1248 with PCB Mounting 48 V 0.83A 0.0 A 1%
MULP40-1258 with PCB Mounting 58 V 0.69A 0.0 A 1%
Model Number Description Voltage Max. Load Min. Load Ripple1
Option 1
Option 2
Option 3
4EM-19-180 39-DE60-44850-002 / A6
35
AC Input Connector (J1) Option 1 Tyco: 640445-3
Mating: 647402-3; Pins: 3-647409-1
DC Output Connector (J2) Option 1 Tyco: 640445-4
Mating: 647402-4; Pins: 3-647409-1
Dimensions 3 x 2 x 0.75 inches
(76.20 x 50.8 x 19.05 mm)
Weight 100 gm approx
CE Mark Complies with LVD Directive
EMC
Approval Agency Nemko, UL, C-UL
Safety Standard(s) EN60601-1, IEC 60601-1 (ed.3), ANSI / AAMI ES 60601 - 1, CSA C22.2 No. 60601-1
Safety File Number(s) Class I : Nemko: P17221669, CB: NO95698, UL: 2017-1-30-E173812
Class II : Nemko: P17221705, CB : NO95847, UL: 2017-01-31-E173812
Safety
Mechanical Specifications
Notes
1. Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Electrolytic capacitor) in parallel with a 0.1 µF capacitor at rated line
voltage and load ranges.
2. Class II version available, Add “-II” suffix at the end of the Model Number.
3. Specifications are for nominal input voltage, 25°C unless otherwise stated.
4. Output ripple can be more than 10% of the output voltage.
5. When used in Cover Kit, de-rate output power to 70 % under all operating conditions
4EM-19-180 39-DE60-44850-002 / A6
Parameter
Conducted Emissions
Radiated Emissions
Input Current Harmonics
Voltage Fluctuation and Flicker
ESD Immunity
Radiated Field Immunity
Electrical Fast Transient Immunity
Surge Immunity
Conducted Immunity
Magnetic Field Immunity
Voltage dips, interruptions
Conditions/Description
EN 55011-B,CISPR22-B, FCC PART15-B
EN 55011 A
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
Criteria
Pass
Pass
Level B with external core (King core K5B RC
25x12x15-M in input cable)
Class A
Pass
Level 4, Criterion A
Level 3, Criterion A
Level 3, Criterion A
Level 3, Criterion A
Level 3, Criterion A
Level 4, Criterion A
Criterion A & B
Innovaons in Power
4
Derating Curve
Mechanical Drawing
Option 1
Notes: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following
1. Stand off, used to mount PCB has OD of 5.4 mm max.
2. Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
3. Washer, if used, to have dia of 6.5 mm max.
4EM-19-180 39-DE60-44850-002 / A6
De-rate linearly from 100% at 50°C to 50% at 70°C
37
Mechanical Drawing
Option 2
4EM-19-180 39-DE60-44850-002 / A6
Mechanical Drawing
Option 3