6 SERIES SOLID STATE RELAYS C US UL Recognized File No. E52197 F E AT U R E S B E N E F I T S SOLID STATE CIRCUITRY NO MOVING PARTS OPTICALLY COUPLED CIRCUIT ISOLATE INPUT FROM OUTPUT INTERNAL SNUBBER PROTECTS RELAY FROM TRANSIENTS RED L. E. D. STATUS LAMP VERIFY PRESENCE OF INPUT VOLTAGE CLEAR PLASTIC COVER PROTECTION FROM ACCIDENTAL CONTACT MANUFACTURED UNDER ISO 9002 COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE ALL CURRENT RATINGS ON THE FOLLOWING PAGES = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION ARE BASED ON USE OF A SUITABLE THERMALLY TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT CONDUCTIVE COMPOUND (E.G. SILICONE GREASE BETWEEN THE SSR MOUNTING BASE AND THE MOUNTING SURFACE OF A SUITABLE HEAT SINK). RED L. E. D. STATUS LAMP SAFETY COVER STANDARD ON ALL MODELS EXCEPT DUAL OUTPUT FAMILY INPUTCONTROL ASX DSX DTX DDX AC DC DC DC OUTPUTLOAD AC AC AC DC CONTROLMETHOD SCRs SCRs TRIAC MOSFET INPUT & OUTPUT SCREW SIZE UP TO 40 AMP INPUT M 3.5 OUTPUT M4 ABOVE 40 AMP M 3.5 M6 9/04 PHONE: ( 843 ) 393-5778 FAX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com 2...7 6 SERIES SOLID STATE RELAYS DTX - DC/AC SPST & DPST, 10 TO 40 AMPS (VIEWED FROM PIN END) US INPUT UL Recognized File No. E52197 GENER AL SPECIFICATIONS (@ 25 C ) DTX - 3 INPUT CHARACTERISTICS Style: Control Voltage Range: Typical Input Current: Must Release Voltage: Maximum. Reverse Control Voltage: 3 - 32 VDC 2 mA (62 series), 16 mA (64 series) 1 VDC YES OUTPUT CHARACTERISTICS Style: Load Voltage Range (50/60 Hz): Rated Load Current: Maximum Off-State Voltage dv/dt: Minimum Load Current: Non -Repetitive Surge Current (1 Cycle): Maximum Off State Leakage current (Rms): Typical On-State Voltage Drop (Rms): Maximum I2T for Fusing (A2 Sec): Suggested Heatsink C/W: Maximum Turn - On Time: Maximum Turn - Off Time: W62 24 - 280 VAC 10 Amp 25 Amp 250 uS 250 uS 50 mA 120 mA 100 A 250 A 10 mA 10 mA 1.6 VAC 1.6 VAC 52 300 3.2 0.5 8.3 mS 8.3 mS MISCELLANEOUS CHARACTERISTICS Dielectric Strength (Input/Output/Base): Insulation Resistance: Operating Temperature Range: Storage Temperature Range: Weight: 4000 V rms 100 megohms minimum @ 500 VDC -40 C to +80 C -40 C to +100 C 100 grams approx. DTX 2.250 (57.2) 1.87 (47.49) 1 RE L.E. 6 1.750 (44.5) OUTPUT OUTPUT 0.250 (6.35) QUICK CONNECT 4 PLACES 5 4- -3 OPTION CODE +3 INPUT 0.187 (4.74) QUICK CONNECT 2 PLACES OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). INPUT RED L.E.D. STATUS LAMP 40 Amp 10 Amp 250 uS 200 uS 50 mA 50 mA 100 A 250 A 10 mA 10 mA 1.6 VAC 1.6 VAC 35 438 3.2 1.4 W64 48 - 480 VAC 40 Amp 25 Amp 250 uS 250 uS 250 mA 20 mA 250 A 250 A 10 mA 10 mA 1.6 VAC 1.6 VAC 250 200 0.2 0.5 2 C WIRING DIAGRAM OUTPUT INPUT ORDERING CODE 6 2 10 DTX- 1 0.800 MAX. (20.32) CLASS: STANDARD PART NUMBERS LOAD VOLTAGE RANGE: 24 - 280 VAC: CODE 2 48 - 480 VAC: CODE 4 *W6210DTX-1 *W6225DTX-1 *W6240DTX-1 *W6410DTX-1 *W6425DTX-1 *W6440DTX-1 W6210DTX-3 W6210DTX-4 *W6225DTX-4 W6240DTX-4 RATED LOAD CURRENT: 10 AMPS, 25 AMPS, 40 AMPS, INPUT/OUTPUT STYLE: DTX: DC - INPUT / AC OUTPUT OPTIONS: -1 = ZERO CROSS, NORMALLY OPEN -2 = RANDOM TURN ON, NORMALLY OPEN -3 = DOUBLE POLE, RANDOM TURN ON, NORMALLY OPEN -4 = RANDOM TURN ON, NORMALLY CLOSED PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com * Approved RATED LOAD CURRENT 10 AMPS 25 AMPS 40 AMPS 10 AMPS 25 AMPS 40 AMPS 10 AMPS 10 AMPS 25 AMPS 40 AMPS 9/04 2...11