SF1059A * * * * * Designed for WLAN IF Applications Low Insertion Loss 9.1 x 7.1 mm Version of SF1059A-1 Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) 350.0 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max Soldering Profile C 260C for 30 s SM9171-10 Electrical Characteristics Characteristic Nominal Center Frequency Passband Sym fC Insertion Loss at fc 3 dB Passband Notes 1 Min Typ 350.00 Max 8 10.0 1, 2 400 600 IL BW3 Amplitude Variation over fc 250 kHz Group Delay Variation over fc 400 kHz Rejection GDV 1, 2, 3 fc-8.0 to fc-2.0 and fc+2.0 to +8.0 MHz fc-50 to fc-8.0 and fc+8.0 to fc+50 MHz dB kHz 0.5 1.0 dBP-P 200 250 nsP-P 35 40 40 45 dB 50 Ultimate TA Operating Temperature Range Units MHz Impedance Matching to 50 unbalanced 1 +70 -20 C External L-C Case Style SM9171-10 9.1 x 7.1 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift, ##=sequence code) See note RFM SF1059A YYWWS## Electrical Connections Connection Input or Return Return or Input Output or Return Port 2 Return or Output Ground Single Ended Operation Differential Operation Port 1 Terminals 5 6 10 1 All others Return is ground Return is hot Notes: 1. Unless noted otherwise, all specitication apply over the operating temperature range with filter soldered to the specified demonstration board with impedanced matching to 50 network analyzer. 2. Unless noted otherwise, all frequency specitications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 9. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1059A-111504 Page 1 of 2 350.0 MHz SAW Filter SM9171-10 Case 10-Terminal Ceramic Surface-Mount Case 9.1 x 7.1 mm Nominal Footprint Case Dimensions Dimension Min 8.86 6.88 A B C D E H P mm Nom 9.09 7.11 1.91 0.99 0.79 1.0 2.54 Max 9.40 7.40 2.00 Inches Nom 0.358 0.280 0.075 0.039 0.031 0.039 0.100 Min 0.349 0.271 Max 0.370 0.291 0.079 Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al2O3 Ceramic Pb Free Electrical Connections Connection Terminals Input or Return Port 1 Port 2 5 Return or Input 6 Output or Return 10 Return or Output 1 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C B P H 3 5 6 RFM SF1059A YYWWS## 4 2 2 1 10 E (10 Places) A 9 3 1 4 10 5 9 6 (10 Places) D 7 8 RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. 8 7 E-mail: info@rfm.com http://www.rfm.com SF1059A-111504 Page 2 of 2 REVISIONS REV ECN A 12256 DESCRIPTION DATE INITIAL RELEASE 06/18/04 All information disclosed by this document is confidential and proprietary to RF Monolithics, Inc. All design, manufacture, use, reproduction and sales rights are reserved by RF Monolithics, Inc. DRAWN BY/DATE: D. GLAVIN TITLE 06/18/04 CALIBRATION PLOTS, SF1059A-DEMO_TD CHECKED/APPROVED BY: J. GRANT 06/18/04 SIZE RFMonolithics, Inc. DALLAS, TEXAS 75244 USA A SCALE DWG. NO. FSCM NO. 2U874 NONE ECN NO. REV SF1059A-013 A SHEET OF 12256 5 1 CH1 S 21 log MAG 10 dB/ REF 0 dB SF1059A Demo Board Plots 16 Jun 2004 08:03:04 1_: 0 dB 0.000 000 MHz SF1059A DEMO REF=1 PRm BW: 1.233 460 MHz Cor cent: 349.871138 MHz 1 Q: 283.65 1_ loss: -6.9457 dB 2 3 4 Hld CENTER 350.000 000 MHz SPAN 20.000 000 MHz A REV DWG NO. FSCM NO. SIZE 2U874 SCALE ECN NO. NONE SF1059A-013 2 12256 SHEET A OF 5 CH1 S 21 delay 100 ns/ SF1059A Demo Board Plots 16 Jun 2004 08:13:06 REF 975.3 ns 2_: 99.087 ns .850 000 MHz SF1059A DEMO REF=1 PRm mean: 900.89 ns Cor s.dev: 43.065 ns p-p: 148.44 ns Smo Hld 2 1 CENTER 350.000 000 MHz SPAN 1.000 000 MHz A REV DWG NO. FSCM NO. SIZE 2U874 SCALE ECN NO. NONE SF1059A-013 3 12256 SHEET A OF 5 CH1 S 11 1 U FS 16 Jun 2004 08:04:43 6.6855 3.0412 nH 2_: 42.813 SF1059A Demo Board Plots 349.871 138 MHz SF1059A DEMO PRm Cor Hld 2 CENTER 350.000 000 MHz SPAN 20.000 000 MHz A REV DWG NO. FSCM NO. SIZE 2U874 SCALE ECN NO. NONE SF1059A-013 4 12256 SHEET A OF 5 CH1 S 22 1 U FS 16 Jun 2004 08:05:16 11.688 5.3166 nH 2_: 46.6 SF1059A DEMO 349.871 138 MHz SF1059A Demo Board Plots PRm Cor 2 Hld CENTER 350.000 000 MHz SPAN 20.000 000 MHz A REV DWG NO. FSCM NO. SIZE 2U874 SCALE ECN NO. NONE SF1059A-013 5 12256 SHEET A OF 5