UL CSA VDE Pending Pending Pending AQ-E RELAYS AQ-E SOLID STATE RELAY FEATURES 28.0 1.102 5.0 .197 1. Conforms to European safety standards (VDE0110) dielectric distance between input and output 15.0 .591 * Creepage distance: Min. 3.0 mm * Clearances distance: Min. 2.5 mm 2. The small-sized slim type 28 mm (L)x5 mm (W)x15 mm 1.063 inch (L)x.197 inch (W)x.591 inch permits high density mounting to PC board 3. High dielectric strength: 2,500V AC (between input and output) 4. Two load types available: DC output type (3A) AC output type (1A) 5. Zero-cross type are availale (AC type) The zero-cross type generates minimal noise 6. Snubber circuit integrated (AC type) The snubber circuit is integrated to prevent malfunction caused by the rapid rise of voltage on the output side, such as inductive load and current. mm inch TYPES Type TYPICAL APPLICATIONS Load voltage AC output 75 to 250 V AC DC output 3 to 60 V DC Input voltage 5 V DC 12 V DC 24 V DC 5 V DC 12 V DC 24 V DC Part No. AQE12105 AQE12112 AQE12124 AQE34205 AQE34212 AQE34224 * Interface relays for programmable controllers * Industrial equipment * Timers and counters * Air conditioners ORDERING INFORMATION Ex. AQE 1 2 1 0 5 Load current Load voltage Type Input voltage 1: 1 A 3: 3 A 2: 75 to 250 V AC 4: 3 to 60 V DC 1: AC output (Zero-cross) 2: DC output 05: 5 V DC 12: 12 V DC 24: 24 V DC (Note) Standard packing: Carton 20 pcs., Case 1,000 pcs. 639 AQ-E SPECIFICATIONS Ratings (at 20C 68F, Input voltage ripple: 1% or less) Type Part No. AQE12105 Input voltage 4 to 6 V DC Item Input Input impedance side Drop-out voltage, min. Reverse voltage Max. load current Load voltage Frequency Non-repetitive surge current Max. "OFF-state" Load leakage current side Max. "ON-state" voltage drop Min. load curent OFF state dV/dt Max. operating speed Approx. 0.5k AC output AQE12112 9.6 to 14.4 V DC Approx. 1.3k 0.5 V DC 1.2 V DC Approx. 3k Approx. 0.5k DC output AQE34212 9.6 to 14.4 V DC Approx. 1.3k 2.4 V DC 0.5 V DC 1.2 V DC AQE12124 21.6 to 26.4 V DC AQE34205 4 to 6 V DC AQE34224 21.6 to 26.4 V DC Remarks Approx. 3k 2.4 V DC 3V 1 A AC 75 to 250 V AC 45 to 65 Hz 3 A DC 3 to 60 V DC -- 20 A 15 A 1.5 mA (applied 200 V) 10A 1.6 V 0.3 V 20 mA 50 V/s 1 mA -- -- 0.5cps. AC: In one cycle at 60 Hz DC: 10 ms at Max. carrying current at rated operating voltage, rated load voltage and current Characteristics (at 20C 68F, Input voltage ripple: 1% or less) Item Operate time max. Release time, max. Insulation resistance, min. Breakdown voltage Functional Vibration resistance Destructive Functional Shock resistance Destructive Ambient temperature Storage temperature Operational method AC output DC output (1/2 cycle of voltage sine wave) + 1 ms 2 ms (1/2 cycle of voltage sine wave) + 1 ms 0.4 ms 109 between input and output 2,500 Vrms between input and output 10 to 55 Hz double amplitude of 1.5 mm 10 to 55 Hz double amplitude of 1.5 mm Min. 490 m/s2 {50 G} Min. 490 m/s2 {50 G} -30C to +80C -22F to +176F -30C to +100C -22F to +212F Zero-cross (Turn-ON and Turn-OFF) -- Remarks Using 500 V DC megger Initial for 1 min. 1 hour for X, Y, Z axes 10 min. for X, Y, Z axes 5 times each for X, Y, Z axes 4 times each for X, Y, Z axes REFERENCE DATA 1. Load current vs. ambient temperature 2.-(1) Non-repetitive surge current vs. carrying time (AC output) 2.-(2) Non-repetitive surge current vs. carrying time (DC output) 20 2.5 DC type 2.0 1.5 AC type 1.0 Non-repetitive surge current, A Load current, A 3.0 Non-repetitive surge current, A 3.5 30 20 10 15 10 5 0.5 0 -30 640 0 20 40 60 80 Ambient temperature, C 0 1 2 3 4 5 7 10 20 30 4050 70 100 No. of cycles at 60 Hz 0 10 100 Carrying time, ms 1,000 AQ-E 4.-(1) Load current vs. ambient temperature characteristics for adjacent mounting (AC output) 30 1.2 25 1.0 =15 mm .591 inch 0.8 =10 mm .394 inch 0.6 =5 mm .197 inch 20 15 (5 V type) (12 V type) 10 (24 V type) 5 4.-(2) Load current vs. ambient temperature characteristics for adjacent mounting (DC output) 3.5 0.4 3.0 Load current, A Load current, A Input current, mA 3. Input voltage vs. input current characteristics =15 mm .591 inch =10mm .394 inch =5mm .197 inch 2.5 2.0 1.5 1.0 0.2 0.5 = Adjacent mounting pitch = Adjacent mounting pitch 0 5 10 15 20 25 Input voltage, V 30 0 0 -20 0 20 40 60 80 100 Ambient temperature, C -20 0 20 40 60 80 100 Ambient temperature, C DIMENSIONS mm inch 15.0 max. 0.5 .591 max. .020 3.78 .149 0.50.1 .020.004 1.2 .047 5.0 .197 2-0.5+0.2 -0.1 2-.020+.008 -.004 0.3 3.78.012 .149 2-1.0 0.1 2-.039 .004 0.3 21.42.012 .843 28.0 max. 1.102 max. 2-1 2-. .6 dia 06 . 3d ia. 2-1 . 2-.02 dia. 47 dia . Mounting hole location (Bottom view) 21.42 .843 0.5 5.04 0.3 3.5.020 .198 .012 .138 1.9 .075 5.04 .198 1.2 .047 1.9 .075 Tolerance: 0.1 .004 Schematic AC type Input - + Output General tolerance: 0.5 .020 DC type Input - + Output + - For Cautions for Use, see Technical Information 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, 641 Ltd.