SINGLE-IN-LINE SOCKETS Solderless Press-Fit Single Row Series 304, 306 * Unique compliant tail pins conform to the plated thru-hole without stressing the inner layers of a multilayer board. * Recommended plated thru-hole for 304 series: .036"-.041" use a 1.1mm drill prior to plating. Using M-M# 0477 & 0478 pins. * * For 346 series: .040".003" finished plated thru-hole. using M-M# 4612 & 4613 pins. Patent No. 4,799,904. Hi-Rel, 4-finger BeCu #30 clip rated at 3 amps. See page 208 for details. Ordering Information Fig. 1 Series 304...770 SOLDERLESS PRESS-FIT (For .062" Thick Boards) 304-13-1_ _-41-770 Fig. 1 Specify # of pins Series 304...780 01-64 SOLDERLESS PRESS-FIT (For .125" Thick Boards) 304-13-1_ _-41-780 Fig. 2 Fig. 2 Specify # of pins 01-64 Series 304...770 and 304...780 are available in plating code 13 only. Series 346...012 COMPLIANT SOLDERLESS PRESS-FIT (For .060-.100" Thick Boards) 346-XX-1_ _-41-012 Fig. 3 Specify # of pins Series 346...013 01-64 COMPLIANT SOLDERLESS PRESS-FIT Fig. 3 (For .090-.130" Thick Boards) 346-XX-1_ _-41-013 Fig. 4 Specify # of pins 01-64 XX= Plating Code See Below SPECIFY PLATING CODE XX= Fig. 4 w w w. m i l l - m a x . c o m 13 Sleeve (Pin) 10" Au Contact (Clip) 30" Au 48 93 99 200" Sn/Pb 200" Sn/Pb 30" Au 200" Sn/Pb 516-922-6000