SINGLE-IN-LINE SOCKETS
Solderless Press-Fit
Single Row
www.mill-max.com 516-922-6000
48
Series 304, 306
SPECIFY PLATING CODE XX= 13 93 99
Sleeve (Pin)
Contact (Clip)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb
30µ” Au 30µ” Au 200µ” Sn/Pb
XX= Plating Code
See Below
Ordering Information
Series 304...770 SOLDERLESS PRESS-FIT
304-13-1_ _-41-770
304-13-1_ _-41-780
Series 346...012 COMPLIANT SOLDERLESS PRESS-FIT
346-XX-1_ _-41-012
Series 346...013 COMPLIANT SOLDERLESS PRESS-FIT
346-XX-1_ _-41-013
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Specify # of pins 01-64
Specify # of pins 01-64
Specify # of pins 01-64
Specify # of pins 01-64
Series 304...780 SOLDERLESS PRESS-FIT
Series 304...770 and 304...780 are available in plating code 13 only.
(For .090-.130” Thick Boards)
(For .060-.100” Thick Boards)
(For .062” Thick Boards)
(For .125” Thick Boards)
• Unique compliant tail pins conform to
the plated thru-hole without stressing
the inner layers of a multilayer board.
• Recommended plated thru-hole for
304 series: .036”-.041” use a 1.1mm
drill prior to plating. Using M-M# 0477
& 0478 pins.
• For 346 series: .040”±.003” finished
plated thru-hole. using M-M# 4612
& 4613 pins. Patent No. 4,799,904.
• Hi-Rel, 4-finger BeCu #30 clip rated
at 3 amps. See page 208 for details.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
