Cone Loudspeakers,Wall Baffle, Ceiling Grilles, and Assemblies Speaker Model Variations and Accessories S86 S810 * High quality, direct radiator speakers Features * 7 watts and 15 watts power handling capacity * Provision for quick attachment of transformer * Available with transformer mounted and wired Specifications S86 S810 Cone Diameter: 8" 8" Magnet Weight: 6 oz. 10 oz. Magnet Material: Ceramic Ceramic Voice Coil Impedance: 8 ohms 8 ohms Voice Coil Diameter: 3/4" 1" Frequency Response: 50Hz to 12kHz 70Hz to 15kHz Axial Sensitivity (at 4 feet with 1-watt input): 95dB 96dB Power Handling Capacity (program material): 7 watts 15 watts Depth: 3-1/4" 3-1/4" Shipping Weight: 16 @ 25 lbs. 16 @ 34 lbs. Optional Speaker/Transformer Combinations: S86T725, S810T725 - S86, S810 speaker with 25/70V transformer (Model T725) S86T725BR - S86 speaker with 25/70V transformer and terminal strip (-BR) Accessories: T725 Transformer - 25V or 70V; Power Taps (watts): 4, 2, 1, 1/2, 1/4, 1/8;Voice Coil: 8 ohms T72510 Transformer - 25V or 70V; Power Taps (watts): 10, 5, 2-1/2, 1-1/4, 5/8;Voice Coil: 8 ohms Attenuators - AT10A, AT35A: 10-watt and 35-watt, respectively The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed Description for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). Specifications subject to change without notice. (c)2001 Bogen Communications, Inc. Part No. 54-7777-06R2 Printed in U.S.A. 0106 Wall Baffle, Grilles, Accessories WB8 * Sturdily constructed * Attractively styled and finished * Wall baffle surface mounts at an angle for downward sound dispersion WB8 Wall Baffle The WB8 baffle is ruggedly constructed of 3/8" particle board, glued and covered in simulated walnut vinyl with a black grille cloth. Side corner joints are reinforced with glue blocks. It is handsomely styled and looks well in virtually any decor. The sloping front provides extra downward sound dispersion. CG8A (shown), CG8AW Ceiling Grilles PG8A (shown), Sturdily constructed and handsomely styled, these metal grilles protect and conceal PG8W recessed 8" ceiling speakers. They are shipped complete with the hardware needed to mount speaker to grille. Models CG8A, CG8AW, PG8A, PG8W, and SG8W. RE84 Ceiling Speaker Enclosure The RE84 is a protective enclosure for an 8" speaker, designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic resonance. The RE84 is finished in rust-resistant black primer and is tapered for easy stacking. UL approved. SG8W MR8 MR8 Mounting Ring The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles, for installations where the RE84 is not used. RE84 TB8 Tile Bridge The TB8 is a load bearing T-bar support designed to sustain the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. Use of the TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 20'by-4' acoustic ceiling tiles. Speaker Line Attenuators The AT10A and AT35A are 10-watt and 35-watt attenuators that permit setting the output level at loudspeakers on a 25V or 70V line without altering the amplifier volume setting. They provide a choice of 10 stops and an "off" position. TB8 AT10A Technical Specifications Wall Baffle WB8 Speaker Accommodated Ceiling Grilles CG8A CG8AW PG8W PG8A SG8W* 8" cone 8" cone 8" cone 8" cone 8" cone 8" cone 3/8" Particle Board Aluminum (contoured) Aluminum (contoured) Steel Aluminum Steel Walnut Vinyl** Satin Aluminum Semi-gloss White Enamel Semi-Gloss White Enamel Satin Aluminum Semi-Gloss White Enamel Diameter/Dimensions See Below 12-5/8" 12-5/8" 13" 13" 13" Shipping Weight 4 @ 10 lbs. 15 @ 8 lbs. 15 @ 9 lbs. 20 @ 27 lbs. 20 @ 10 lbs. 10 @ 13 lbs. Constructed of Finish * Features hidden speaker mounting studs * **With black grille cloth * 9-1/2"W x 9-1/2"H x 5-1/4"D (3-1/4" D at bottom) 2 Assemblies For Easy Installation * Speaker plus transformer * Speaker, transformer, baffle or grille * Optional volume control * Optional terminal strip Labor-saving, factory-assembled versions of the S86 and S810 loudspeakers are available. Both can be ordered with the model T725 transformer mounted and wired. The S86 can also be ordered with a transformer and terminal strip for easy connection to the audio line. S86T725 For even greater convenience and time-savings, the speakers are available fully-assembled on a white ceiling grille (model PG8W) for recessed installation, or in a wallmounting baffle (model WB8). The assembled version options include a volume control (recessed or knob) and/or terminal strip. S86T725(BR) & S810T725 Assemblies with Transformer The basic factory-assembled loudspeaker. Includes the S86 or S810 speaker with model T725 transformer mounted and wired. The S86 can also be ordered with a terminal strip (S86T725-BR). S86T725BR S86T725PG8W Assemblies with Transformer & Ceiling Grille The S86 loudspeaker with model T725 transformer is available mounted to a PG8W ceiling grille. The list below shows all the available configurations: S86T725PG8W S86T725PG8WVR S86T725PG8WVK S86T725PG8WBR S86T725PG8WBRVR S86T725PG8WBRVK S86T725 mounted to a PG8W grille S86T725PG8W with recessed volume control (-VR) S86T725PG8W with knob volume control (-VK) S86T725PG8W with terminal strip (-BR) S86T725PG8WBR with recessed volume control S86T725PG8WBR with knob volume control S86T725PG8WBR S810T725PG8W Assemblies with Transformer & Ceiling Grille The S810 loudspeaker with model T725 transformer is available mounted to a PG8W ceiling grille. The list below shows all the available configurations: S810T725PG8W S810T725PG8WVR S810T725PG8WVK S810T725 mounted to a PG8W grille S810T725PG8W with recessed volume control (-VR) S810T725PG8W with knob volume control (-VK) WBS8T725 & WBS810T725 Assemblies with Transformer & Wall Baffle The S86 and S810 loudspeakers with model T725 transformer are available mounted to the WB8 baffle. The list below shows all the available configurations: WBS8T725 WBS8T725V WBS8T725BR WBS8T725BRV WBS810T725 S86T725 mounted in a WB8 baffle WBS8T725 with recessed volume control (-V) WBS8T725 with terminal strip (-BR) WBS8T725BR with recessed volume control (-V) S810T725 mounted in WB8 baffle 3 WBS8T725BR Architects and Engineers Specifications Ceiling Grilles S86 Cone Loudspeaker The loudspeaker shall be a Bogen model S86 (or transformer coupled S86T725 or S86T725BR), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50Hz to 12kHz. Axial sensitivity shall be 95dB, at four feet with one-watt input. The loudspeaker shall have a 6 oz. ceramic magnet, a 3/4" inch voice coil, and a power handling capacity of 7W, minimum. Mounting holes shall be provided for attaching an optional transformer. Speaker depth shall be 3-1/4". - (For S86T725 add) A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. - (For S86T725BR add) A terminal strip shall be provided for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8 watt connection. S810 Cone Loudspeaker The loudspeaker shall be a Bogen model S810 (or transformer coupled S810T725), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 70Hz to 15kHz. Axial sensitivity shall be 96dB, at four feet with onewatt input. The loudspeaker shall have a 10 oz. ceramic magnet, a 1" voice coil, and power handling capacity of 15 watts, minimum. Mounting holes shall be provided for attaching an optional transformer. Speaker depth shall be 31/4". - (For S810T725 add) A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. WB8 Wall Baffle The loudspeaker wall baffle shall be a Bogen model WB8, or equivalent, capable of housing an 8" cone-type loudspeaker and angled for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Hardware for mounting speaker to baffle shall be supplied with the unit. Overall dimensions shall be 9-1/2"W x 91/2"H x 5-1/4"D (top) x 3-1/4"D (base). 4 - (Use for CG8A) The ceiling speaker grille shall be a Bogen model CG8A aluminum grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 12-5/8" and it shall be contoured and finished in satin aluminum. - (Use for CG8AW) The ceiling speaker grille shall be a Bogen model CG8AW aluminum grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 12-5/8" and it shall be contoured and finished in white semi-gloss enamel. - (Use for PG8W) The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall be low profile and finished in white semi-gloss enamel. - (Use for PG8A) The ceiling speaker grille shall be a Bogen model PG8A aluminum grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall be low profile and finished in satin aluminum. - (Use for SG8W) The ceiling speaker grille shall be a Bogen model SG8W steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13", the speaker mounting studs shall be hidden, and the grille shall be low profile and finished in white semi-gloss enamel. Wall Baffle/Speaker Assemblies WBS8T725 The surface-mounting loudspeaker assembly shall be a Bogen model WBS8T725 (or WBS8T725V, WBS8T725BR, or WBS8T725BRV), or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50Hz to 12kHz. Axial sensitivity shall be 95dB, at four feet with one-watt input. The loudspeaker shall have a 6 oz. ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled in a wall baffle for surface mounting, angled for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D (top) x 3-1/4"D (base). primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled on a 13" steel ceiling grille, finished in white semi-gloss enamel. - (For S86T725PG8WVR add) A recessed control shall be included to adjust the volume of the loudspeaker. - (For WBS8T725V add) The assembly shall include a control for adjusting the volume of the loudspeaker. - (For S86T725PG8WVK add) A control, accessible from the front of the grille, shall be included to adjust the volume of the loudspeaker. - (For WBS8T725BR add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8 watt power connection. - (For S86T725PG8WBR add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8 watt power connection. - (For WBS8T725BRV add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8 watt power connection. A control shall also be included for adjusting the volume of the loudspeaker. - (For S86T725PG8WBRVR add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8 watt power connection. A recessed control shall be included to adjust the volume of the loudspeaker. WBS810T725 The surface mounting loudspeaker shall be a Bogen model WBS810T725, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 70Hz to 15kHz. Axial sensitivity shall be 96dB, at four feet with one-watt input. The loudspeaker shall have a10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled in a wall baffle for surface mounting, angled for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D (top) x 3-1/4"D (base). Ceiling/Speaker Assemblies S86T725PG8W & Variations The loudspeaker assembly shall be a Bogen model S86T725PG8W (or S86T725PG8WVR, S86T725PG8WVK, S86T725PG8WBR, S86T725PG8WBRVR, or S86T725PG8WBRVK), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50Hz to 12kHz. Axial sensitivity shall be 95dB, at four feet with one-watt input. The loudspeaker shall have a 6 oz. ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer 5 - (For S86T725PG8WBRVK add) A terminal strip shall be included for connection of the audio line. Terminals shall be labeled for 4, 2, 1, 1/2, 1/4, and 1/8 watt power connection. A control, accessible from the front of the grille, shall be included to adjust the volume of the loudspeaker. S810T725PG8W & Variations The loudspeaker shall be a Bogen model S810T725PG8W (or S810T725PG8WVR, or S810T725PG8WVK), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 70Hz to 15kHz. Axial sensitivity shall be 96dB, at four feet with onewatt input. The loudspeaker shall have a 10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled on a 13" steel ceiling grille, finished in white semi-gloss enamel. Accessories RE84 - Ceiling Speaker Enclosure The protective enclosure for the 8" cone-type loudspeakers shall be a Bogen model RE84, or equivalent, designed for recessed installations. It shall be constructed of one-piece heavy-gauge steel, and shall include a speaker mounting ring. A foam insert shall be permanently attached to the inner surface, to prevent metallic resonance. Four combination 1/2" - 3/4" conduit knockouts shall be provided at 90 degree intervals, and the unit shall be finished in a rust-retardant black primer coating. The dimensions shall be: 12-1/4" dia. x 4-1/2"D. RE84 MR8 - Mounting Ring MR8 The plaster ring shall be a Bogen model MR8, or equivalent, circular cold-rolled steel unit. It shall be finished in a rustretardant gray primer coating, and the dimensions shall be: 12" dia. x 3/4"D. TB8 - Tile Bridge The load bearing T-bar support shall be a Bogen model TB8, or equivalent, capable of sustaining the weight of an 8" speaker, grille and protective enclosure in suspended ceiling construction. It shall be manufactured of steel and shall be finished with a rust-retardant galvanized coating. The unit shall measure: 24"W x 3/4"H x 14-3/4"D. TB8 Attenuators The speaker line attenuator shall be a Bogen model (specify AT10A or AT35A), and shall permit setting the output level at loudspeakers on a 25V or 70V line without altering the amplifier volume setting. The attenuator shall provide a choice of 10 stops and an "off " position, and shall be capable of controlling up to 10-/35-watt speaker systems. 50 Spring Street, Ramsey, New Jersey 07446, U.S.A. (201) 934-8500 FAX: (201) 934-9832; www.bogen.com