The Bogen Models S86 and S810 8" cone-type loud-
speak ers pr ovide excellent sound quality and tr ouble-
free operation. Their magnetic structure is designed
for maximum air ga p energy and the diaphragms have
been selected for high sensitivity and optimized
response characteristics. The speakers are easy to
install in ceiling grilles or wall baffles. Mounting holes
have been provided for quick attachment of a trans-
former.
Transf ormers include the Model T725,which matches
an 8-ohm speaker to a 25- or 70-volt line with six
pow er taps f or either voltage (4,2,1,1/2,1/4,and 1/8
watt), and the Model T72510 which matches an 8-
ohm speaker to a 25- or 70-volt line with five power
taps for either voltage (10,5,2-1/2, 1-1/4,5/8 watts).
The S86 and S810 are available in factory assembled
versions, with the Model T725 transformer already
mounted. The S86 assembly is also available with a
terminal strip (-BR),and volume control (-V).
Bogen also offers the speakers,fully assembled with a
transformer, in an attractively finished wall baffle
(Model WB8), or in ceiling grilles for recessed instal-
lation. Assemblies are also available with optional v ol-
ume control and/or terminal strip.
S86 S810
Cone Diameter : 8" 8"
Magnet W eight: 6 oz. 10 oz.
Magnet Material: Ceramic Ceramic
Voice Coil Impedance: 8 ohms 8 ohms
Voice Coil Diameter : 3/4" 1"
Frequency Response: 50Hz to 12kHz 70Hz to 15kHz
Axial Sensitivity (at 4 feet with 1-watt input): 95dB 96dB
Power Handling Capacity (program material): 7 watts 15 watts
Depth: 3-1/4" 3-1/4"
Shipping W eight: 16 @ 25 lbs. 16 @ 34 lbs.
Optional Speaker/Transformer Combinations:
S86T725,S810T725 – S86,S810 speaker with 25/70V transformer (Model T725)
S86T725BR – S86 speaker with 25/70V transformer and terminal strip (-BR)
Accessories:
T725 Transformer – 25V or 70V; Power Taps (watts): 4, 2, 1,1/2, 1/4, 1/8;Voice Coil: 8 ohms
T72510 Transformer – 25V or 70V;Power Taps (watts):10,5,2-1/2,1-1/4,5/8;Voice Coil:8 ohms
Attenuators – AT10A, AT35A: 10-watt and 35-watt, respectively
Specifications
Description
Features
Cone Loudspeakers,Wall Baffle ,
Ceiling Grilles, and Assemblies
Specifications subject to change without notice.
©2001Bogen Communications,Inc.
Part No.54-7777-06R2 Printed in U.S.A. 0106
• High quality,direct radiator speakers
• 7 watts and 15 watts power handling capacity
• Provision for quick attachment of transformer
Available with transformer mounted and wired
Speaker Model
Variations and
Accessories
S86
S810
Wall Baffle , Grilles, Accessories
• Sturdily constructed
Attractively styled and finished
Wall baffle surface mounts at an angle for downward sound dispersion
WB8 Wall Baffle
The WB8 baffle is ruggedly constructed of 3/8" particle board,glued and covered in
simulated walnut vin yl with a black grille cloth. Side corner joints are r einfor ced with
glue blocks. It is handsomely styled and looks well in vir tually any decor. The slop-
ing front provides extra downward sound dispersion.
Ceiling Grilles
Sturdily constructed and handsomely styled, these metal grilles protect and conceal
recessed 8" ceiling speakers. They are shipped complete with the hardware needed
to mount speaker to grille . Models CG8A,CG8AW, PG8A, PG8W, and SG8W.
RE84 Ceiling Speaker Enclosure
The RE84 is a protective enclosure for an 8" speaker, designed for recessed instal-
lations, and for use with any of the Bogen ceiling grilles. One-piece steel construc-
tion includes a mounting ring and a foam insert to reduce metallic resonance . The
RE84 is finished in rust-resistant black primer and is tapered for easy stacking.
UL approved.
MR8 Mounting Ring
The MR8 is a cold-r olled steel unit which will mount any of the Bogen ceiling grilles,
for installations where the RE84 is not used.
TB8 Tile Bridge
The TB8 is a load bearing T-bar support designed to sustain the weight of an 8"
speak er,grille and protective enclosur e in suspended ceiling construction. Use of the
TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 20'-
by-4' acoustic ceiling tiles.
Speaker Line Attenuators
The AT10A and AT35A are 10-watt and 35-watt attenuators that permit setting
the output level at loudspeakers on a 25V or 70V line without altering the amplifier
volume setting. They provide a choice of 10 stops and an "off" position.
2
Technical Specifications
Wall Baffle Ceiling Grilles
WB8 CG8A CG8AW PG8W PG8A SG8W*
Speaker Accommodated 8" cone 8" cone 8" cone 8" cone 8" cone 8" cone
Constructed of 3/8" Particle Aluminum Aluminum Steel Aluminum Steel
Board (contoured) (contoured)
Finish Walnut Vinyl** Satin Semi-gloss Semi-Gloss Satin Semi-Gloss
Aluminum White Enamel White Enamel Aluminum White Enamel
Diameter/Dimensions See Below† 12-5/8"12-5/8"13" 13" 13"
Shipping W eight 4 @ 10 lbs. 15 @ 8 lbs. 15 @ 9 lbs. 20 @ 27 lbs. 20 @ 10 lbs. 10 @ 13 lbs.
* Features hidden speaker mounting studs • **With black grille cloth • † 9-1/2"W x 9-1/2"H x 5-1/4"D (3-1/4" D at bottom)
WB8
CG8A(shown),
CG8AW
PG8A(shown),
PG8W
SG8W
MR8
RE84
TB8 AT10A
Assemblies For Easy Installation
• Speaker plus transformer
• Speaker,transformer,baffle or grille
• Optional volume control
• Optional terminal strip
Labor-saving,factory-assembled versions of the S86 and S810loudspeakers are avail-
able. Both can be ordered with the model T725 transformer mounted and wired.
The S86 can also be ordered with a transformer and terminal strip for easy connec-
tion to the audio line.
For even greater convenience and time-savings,the speakers are available fully-assem-
bled on a white ceiling grille (model PG8W) for recessed installation, or in a wall-
mounting baffle (model WB8). The assembled version options include a volume con-
trol (recessed or knob) and/or terminal strip.
S86T725(BR) & S810T725 Assemblies with Transformer
The basic factory-assembled loudspeaker. Includes the S86 or S810speaker with
model T725 transformer mounted and wired. The S86 can also be ordered with a
terminal strip (S86T725-BR).
S86T725PG8W Assemblies with Transformer & Ceiling Grille
The S86 loudspeaker with model T725 transf ormer is a vailable mounted to a PG8W
ceiling grille. The list below shows all the available configurations:
S86T725PG8W S86T725 mounted to a PG8W grille
S86T725PG8WVR S86T725PG8W with recessed volume control (-VR)
S86T725PG8WVK S86T725PG8W with knob volume control (-VK)
S86T725PG8WBR S86T725PG8W with terminal strip (-BR)
S86T725PG8WBRVR S86T725PG8WBR with recessed volume control
S86T725PG8WBRVK S86T725PG8WBR with knob volume control
S810T725PG8W Assemblies with Transformer & Ceiling Grille
The S810loudspeaker with model T725 transformer is available mounted to a
PG8W ceiling grille. The list below shows all the available configurations:
S810T725PG8W S810T725 mounted to a PG8W grille
S810T725PG8WVR S810T725PG8W with recessed volume control (-VR)
S810T725PG8WVK S810T725PG8W with knob volume control (-VK)
WBS8T725 & WBS810T725 Assemblies with Transformer & Wall Baffle
The S86 and S810loudspeakers with model T725 transformer are available mount-
ed to the WB8 baffle. The list below shows all the available configurations:
WBS8T725 S86T725 mounted in a WB8 baffle
WBS8T725V WBS8T725 with recessed volume control (-V)
WBS8T725BR WBS8T725 with terminal strip (-BR)
WBS8T725BRV WBS8T725BR with recessed volume control (-V)
WBS810T725 S810T725 mounted in WB8 baffle
3
S86T725
S86T725BR
S86T725PG8WBR
WBS8T725BR
Architects and Engineers
Specifications
S86 Cone Loudspeaker
The loudspeaker shall be a Bogen model S86 (or trans-
former coupled S86T725 or S86T725BR), or equivalent,
8" cone-type loudspeaker,having a frequency r esponse of at
least 50Hz to 12kHz. Axial sensitivity shall be 95dB,at four
feet with one-watt input. The loudspeak er shall have a 6 oz.
ceramic magnet,a 3/4" inch voice coil,and a power handling
capacity of 7W,minimum. Mounting holes shall be provided
for attaching an optional transformer.Speaker depth shall be
3-1/4".
– (For S86T725 add) A transformer, capable of matching
an 8-ohm loudspeaker to a 25-volt or 70-volt line,and pro-
viding power taps of 4, 2, 1,1/2, 1/4, and 1/8 watts shall be
included. The transformer primary and secondary leads
shall be stripped,tinned, and shall be at least 6" in length.
– (For S86T725BR add) A terminal strip shall be provid-
ed for connection of the audio line. Terminals shall be
labeled for 4,2,1,1/2, 1/4,and 1/8 watt connection.
S810 Cone Loudspeaker
The loudspeaker shall be a Bogen model S810(or trans-
former coupled S810T725), or equivalent, 8" cone-type
loudspeak er,having a fr equency response of at least 70Hz to
15kHz. Axial sensitivity shall be 96dB,at four feet with one-
watt input. The loudspeaker shall have a 10 oz. ceramic
magnet, a 1" voice coil, and power handling capacity of 15
watts, minimum. Mounting holes shall be provided for
attaching an optional transformer. Speak er depth shall be 3-
1/4".
– (For S810T725 add) A transformer,capable of matching
an 8-ohm loudspeaker to a 25-volt or 70-volt line,and pro-
viding power taps of 4, 2, 1,1/2, 1/4, and 1/8 watts shall be
included. The transformer primary and secondary leads
shall be stripped,tinned, and shall be at least 6" in length.
WB8 Wall Baffle
The loudspeaker wall baffle shall be a Bogen model WB8,
or equivalent, capable of housing an 8" cone-type loud-
speaker and angled for additional downward sound disper-
sion. The baffle shall be constructed of 3/8" par ticle board,
glued and covered in simulated walnut vinyl. Glue blocks
shall be used to reinforce all side corner joints. The speak-
er opening shall be covered with a black grille cloth.
Hardware for mounting speaker to baffle shall be supplied
with the unit. Overall dimensions shall be 9-1/2"W x 9-
1/2"H x 5-1/4"D (top) x 3-1/4"D (base).
Ceiling Grilles
– (Use for CG8A) The ceiling speaker grille shall be a
Bogen model CG8A aluminum grille,or equivalent,capable
of protecting and concealing a recessed 8" cone-type loud-
speaker. The diameter of the grille shall be 12-5/8" and it
shall be contoured and finished in satin aluminum.
– (Use for CG8AW) The ceiling speaker grille shall be a
Bogen model CG8AW aluminum grille,or equivalent,capa-
ble of protecting and concealing a recessed 8" cone-type
loudspeak er. The diameter of the grille shall be 12-5/8" and
it shall be contoured and finished in white semi-gloss enam-
el.
– (Use for PG8W) The ceiling speaker grille shall be a
Bogen model PG8W steel grille, or equivalent, capable of
protecting and concealing a recessed 8" cone-type loud-
speaker. The diameter of the grille shall be 13" and it shall
be low profile and finished in white semi-gloss enamel.
– (Use for PG8A) The ceiling speaker grille shall be a
Bogen model PG8A aluminum grille,or equivalent, capable
of protecting and concealing a recessed 8" cone-type loud-
speaker. The diameter of the grille shall be 13" and it shall
be low profile and finished in satin aluminum.
– (Use for SG8W) The ceiling speaker grille shall be a
Bogen model SG8W steel grille, or equivalent, capable of
protecting and concealing a recessed 8" cone-type loud-
speaker. The diameter of the grille shall be 13",the speaker
mounting studs shall be hidden, and the grille shall be low
profile and finished in white semi-gloss enamel.
Wall Baffle/Speaker Assemblies
WBS8T725
The surface-mounting loudspeaker assembly shall be a
Bogen model WBS8T725 (or WBS8T725V,
WBS8T725BR, or WBS8T725BRV), or equivalent, 8"
cone-type loudspeaker having a frequency response of at
least 50Hz to 12kHz. Axial sensitivity shall be 95dB,at four
feet with one-watt input. The loudspeak er shall have a 6 oz.
ceramic magnet and a 3/4" voice coil. A transformer, capa-
ble of matching an 8-ohm loudspeaker to a 25-volt or 70-
volt line,and pro viding power ta ps of 4,2,1,1/2,1/4,and 1/8
watts shall be included. The transformer primary and sec-
ondary leads shall be stripped,tinned,and shall be at least 6"
in length.
4
The loudspeaker shall be assembled in a wall baffle for sur-
face mounting, angled for additional downward sound dis-
persion. The baffle shall be constructed of 3/8” particle
board, glued and covered in simulated walnut vinyl. Glue
blocks shall be used to reinforce all side corner joints. The
speaker opening shall be covered with a black grille cloth.
Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D
(top) x 3-1/4"D (base).
– (For WBS8T725V add) The assembly shall include a
control for adjusting the volume of the loudspeaker.
– (For WBS8T725BR add) A terminal strip shall be
included for connection of the audio line. Terminals shall be
labeled for 4,2, 1,1/2,1/4,and 1/8 watt power connection.
– (For WBS8T725BRV add) A terminal strip shall be
included for connection of the audio line. Terminals shall be
labeled for 4,2, 1,1/2,1/4,and 1/8 watt power connection.
A control shall also be included for adjusting the volume of
the loudspeaker.
WBS810T725
The surface mounting loudspeaker shall be a Bogen model
WBS810T725, or equivalent, 8" cone-type loudspeaker
having a frequency response of at least 70Hz to 15kHz.
Axial sensitivity shall be 96dB, at four feet with one-watt
input. The loudspeaker shall have a10 oz. ceramic magnet
and a 1" voice coil. A transformer, capable of matching an
8-ohm loudspeaker to a 25-volt or 70-volt line,and provid-
ing power taps of 4, 2, 1,1/2, 1/4, and 1/8 watts shall be
included. The transformer primary and secondary leads
shall be stripped,tinned, and shall be at least 6" in length.
The loudspeaker shall be assembled in a wall baffle for sur-
face mounting, angled for additional downward sound dis-
persion. The baffle shall be constructed of 3/8” particle
board, glued and covered in simulated walnut vinyl. Glue
blocks shall be used to reinforce all side corner joints. The
speaker opening shall be covered with a black grille cloth.
Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D
(top) x 3-1/4"D (base).
Ceiling/Speaker Assemblies
S86T725PG8W & Variations
The loudspeaker assembly shall be a Bogen model
S86T725PG8W (or S86T725PG8WVR,
S86T725PG8WVK,S86T725PG8WBR,
S86T725PG8WBRVR, or S86T725PG8WBRVK), or
equivalent, 8" cone-type loudspeaker, having a frequency
response of at least 50Hz to 12kHz. Axial sensitivity shall
be 95dB,at four feet with one-watt input. The loudspeaker
shall have a 6 oz. ceramic magnet and a 3/4" voice coil. A
transformer, capable of matching an 8-ohm loudspeaker to
a 25-volt or 70-volt line,and pro viding po wer taps of 4,2,1,
1/2, 1/4, and 1/8 watts shall be included. The transformer
primary and secondary leads shall be stripped, tinned, and
shall be at least 6" in length.
The loudspeaker shall be assembled on a 13" steel ceiling
grille, finished in white semi-gloss enamel.
– (For S86T725PG8WVR add) A recessed control shall
be included to adjust the volume of the loudspeaker.
– (For S86T725PG8WVK add) A control, accessible
from the front of the grille, shall be included to adjust the
volume of the loudspeaker.
– (For S86T725PG8WBR add) A terminal strip shall be
included for connection of the audio line. Terminals shall be
labeled for 4,2, 1,1/2,1/4,and 1/8 watt power connection.
– (For S86T725PG8WBRVR add) A terminal strip shall
be included for connection of the audio line. Terminals shall
be labeled for 4,2, 1,1/2, 1/4, and 1/8 watt power connec-
tion.A recessed control shall be included to adjust the vol-
ume of the loudspeaker.
– (For S86T725PG8WBRVK add) A terminal strip shall
be included for connection of the audio line. Terminals shall
be labeled for 4,2, 1,1/2, 1/4, and 1/8 watt power connec-
tion.A control, accessible from the front of the grille, shall
be included to adjust the volume of the loudspeaker.
S810T725PG8W & Variations
The loudspeaker shall be a Bogen model
S810T725PG8W (or S810T725PG8WVR,or
S810T725PG8WVK), or equivalent, 8" cone-type loud-
speaker, having a frequency response of at least 70Hz to
15kHz. Axial sensitivity shall be 96dB,at four feet with one-
watt input. The loudspeaker shall have a 10 oz. ceramic
magnet and a 1" voice coil. A transformer,capable of match-
ing an 8-ohm loudspeaker to a 25-volt or 70-volt line, and
providing power taps of 4, 2, 1,1/2, 1/4, and 1/8 watts shall
be included. The transformer primary and secondar y leads
shall be stripped, tinned, and shall be at least 6" in length.
The loudspeaker shall be assembled on a 13" steel ceiling
grille, finished in white semi-gloss enamel.
5
Accessories
RE84 - Ceiling Speaker Enclosure
The protective enclosure for the 8" cone-type loudspeakers
shall be a Bogen model RE84, or equivalent, designed for
recessed installations. It shall be constructed of one-piece
heavy-gauge steel,and shall include a speaker mounting ring.
A foam insert shall be permanently attached to the inner
surface, to prevent metallic resonance. Four combination
1/2" – 3/4" conduit knock outs shall be pro vided at 90 degree
intervals, and the unit shall be finished in a rust-retardant
black primer coating. The dimensions shall be:12-1/4" dia.x
4-1/2"D.
MR8 - Mounting Ring
The plaster ring shall be a Bogen model MR8,or equivalent,
circular cold-rolled steel unit. It shall be finished in a rust-
retardant gray primer coating, and the dimensions shall be:
12" dia. x 3/4"D.
TB8 - Tile Bridge
The load bearing T-bar support shall be a Bogen model TB8,
or equivalent, capable of sustaining the weight of an 8"
speaker,grille and protective enclosure in suspended ceiling
construction. It shall be manufactured of steel and shall be
finished with a rust-retardant galvanized coating. The unit
shall measure:24"W x 3/4"H x 14-3/4"D.
Attenuators
The speaker line attenuator shall be a Bogen model (specify
AT10A or AT35A), and shall permit setting the output
level at loudspeakers on a 25V or 70V line without altering
the amplifier volume setting. The attenuator shall provide a
choice of 10 stops and an "off" position, and shall be capa-
ble of controlling up to 10-/35-watt speaker systems.
50 Spring Street,Ramsey, New Jersey 07446,U.S.A.
(201) 934-8500 FAX: (201) 934-9832; www.bogen.com
RE84
MR8
TB8