G E SOLID STATE OL de ffsazsoa1 oo11obe 7 j 3875081 G & SOLID STATE O1E 11062 dD T- 35> 25" g U1897-U1899 @ INTERSIL 5 N-Channel JFET Switch ! 5 FEATURES APPLICATIONS 2 @ Low Insertion Loss Analog Switches, Choppers = *NoEF Offset Volt G id By Closed Ko Error or Offset Voltage Generated By Close ABSOLUTE MAXIMUM RATINGS (Ta = 28C unless otherwise noted) PIN CONFIGURATION Gate-Drain or Gate-Source Voltage .............6- ~40V Forward Gate Current oo... cc cscs esectecccenerecs 10mA Storage Temperature Range ..... vs. 55C to + 150C 70.92 Operating Temperature Range ........ 55C to + 135C Lead Temperature (Soldering, 10sec) ........... +300C Power Dissipation ........-...cceev evens ere enes 350mW Derate above 25C ..... eee eee ee serene 3.2mW/G NOTE: Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of tha davice at these or any other conditions above those indicated in the operational sections of the specifications is not impited. Exposure to absolute maximum rating conditions for extended peri- ods may affect device reliability. Ds G ORDERING INFORMATION 0267-1 5001 TO-92 TO-92-18 U1897 U1897-18 U1898 U1898-18 U1899 U1899-18 ELECTRICAL CHARACTERISTICS ct, = 25C unless otherwise specified) Symbol Parameter Test Conditions 1897 y1898 1899 Units Min | Max | Min | Max | Min | Max BVgss | Gate-Source Breakdown Voltage |lq= 1pnA, Vps=0 40 -40 40 Vv Iass _| Gate Reverse Current Ves= 20V, Vps=0 -400 ~400 400 Ipao | Drain-Gate Leakage Current Vog = 20V, Is=0 200 200 200 pA Isao _ | Source-Gate Leakage Current Vsq= 20V, Ilp=0 200 200 200 Ipjot =| Drain Cutoff Current Vos=20V, Vas= 12V (U1897) 200 200 200 Vas= 8V (U1898) [+ g5 Ves= 6V (Ui899)| * 10 10 10 | nA Vascotn | Gate-Source Cutoff Voltage Vps= 20V, Ip=1nA 5.0| 10 | 2.0]~7.0-|1.0] -5.0} V Ibss Saturation Drain Current (Note 1) | Vpg=20V, Vas=0 30 15 8.0 mA Vpscon) | Drain-Source ON Voltage Vas=0, [lp=6.6mA (U1897) Ip= 4.0mA (U1898) 02 0.2 02) Vv ip=2.5mA (U1899) TpS(on)_| Static Drain-Source ON Resistance | [p= 1mA, Vag=0 80 50 80 a INTERSIL'S SOLE AND EXCLUSIVE WARRANTY OBLIGATION WITH RESPECT TO THIS PRODUCT SHALL BE THAT STATED IN THE WARRANTY ARTICLE OF THE CONDITION OF SALE. THE WARRANTY SHALL BE EXCLUSIVE AND SHALL BE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. NOTE: All typical values have been characterized but are not tested. 10-110 G E SOLID STATE 01 De ffsa7soa, oo11o.3 95 &f 3875081 G E SOLID STATE DIE 11063 D U1897-U1899 , [INTERSIL . a T-35 -ags ELECTRICAL CHARACTERISTICS (Continued) (Ta = 25C unless otherwise specified) - ~ ~ ' G ay Symbol! Parameter Test Conditions 1897 1898 1899 Units} @ Min | Max | Min | Max| Min! Max 8 Cag Drain-Gate Capacitance Vpq = 20V, Ils =0 5 5 5 Cc. Source-Gate Capacitance Vsg = 20V, Ip=0 5 6 5 | sg Cisg Common-Source Input Capacitance Vps=20V, Vag=0 f=1MHz 16 16 16 | pF Cres Common-Source Reverse Transfer (Note 2) 38 35 a5 Capacitance . . , tion) _ | Turn ON Delay Time (Note 2) Switching Time Test Conditions 16 15 20 t Rise Time (Note 2) U1897 U1898 U1899 10 20 40 to _ | Tun OFF Time (Note 2) Vop yo ns Vasion) 0 0 0 Vasioth -12V -8V -6V 40 60 80 RL 4252 7700 11200 Ip(on) 6.6mA 4mA 2.5mA NOTES: 1. Pulse test pulsewidth=900,8; duty cycle <3%. 2. For dosign reference only, not 100% tested. INTERSIL'S SOLE AND EXCLUSIVE WARRANTY OBLIGATION WITH RESPECT TO THIS PRODUCT SHALL BE THAT STATED IN THE WARRANTY ARTICLE OF THE CONDITION OF SALE. THE WARRANTY SHALL BE EXCLUSIVE AND SHALL BE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. NOTE: All ypical values have been characterized but are not tested. 10-111