© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 1
One world. One KEMET
Benets
• Rated voltage: 16 & 50 VDC
• Capacitance range: 0.0033 – 0.1 µF
• EIA size: 1206 – 1812
• Capacitance tolerance: ±2%, ±5%
• Climatic category: 55/125/56
• RoHS Complaint and lead-free terminations
• Operating temperature range of -55˚C to +125˚C
Overview
Polyphenylene sulphide (PPS) lm capacitor for surface
mounting.
Applications
Typical applications include timing, ltering and use as a memory
capacitor. The LDB Series is designed for high stability, accuracy
and temperature.
General Purpose, High Stability and AC Line EMI Suppression
LDB Series Unencapsulated Winding,
Size 1206 – 1812, 16 & 50 VDC
Part Number System
LDB A A 2120 GC5 N0
Series Rated Voltage (VDC) Size Code Capacitance Code (pF) Capacitance
Tolerance Version Packaging Code Internal Use
Metallized
PPS
A = 16
C = 50
See Dimension
Table
Digits 2 – 4 indicate the
rst three digits of the
capacitance value.
First digit indicates the
number of zeros to be
added.
G = ±2%
J = ±5%
C5 = Standard See Ordering
Options Table
0 (Standard)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 2
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Ordering Options Table
Packaging Type Packaging
Code
Standard Packaging Options
Tape & Reel (Standard Reel) N
Dimensions – Millimeters
Size Code Chip Size
(EIA) B H L
Nominal Tolerance Nominal Tolerance
A1206 1.7 +/-0.2
See Part Number Table
3.3 +0.3/-0.1
B1210 2.5 +/-0.3 3.3 +0.3/-0.1
C1812 3.3 +/-0.3 4.7 +0.3/-0.2
L
H
B
F
F
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 3
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Performance Characteristics
Rated Voltage (VDC) 16 50
Capacitance Range (μF) 0.012 – 0.1 0.0033 – 0.1
Chip Size (EIA) 1206 – 1812
Capacitance Values E12 series
Capacitance Tolerance ±2%, ±5%
Category Temperature Range -55°C to +125°C
Rated Temperature +105°C
Voltage Derating
The rated voltage is decreased with
1.25%/°C from +105°C to +125°C
Climatic Category 55/125/56
Insulation Resistance
Measured at +25°C ±5°C
Minimum Value Between Terminals
3,000 MΩ
Dissipation Factor
Maximum Values at 25°C ±5°C
1 kHz 0.6%
Surge Voltage Test 1.75 x VR (5 seconds; T = 25 ± 5°C)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 4
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Environmental Test Data
Damp Heat, Steady State
Test Conditions
Temperature +40°C ±2°C
Relative Humidity (RH) 93% ±2%
Test Duration 56 days
Performance
Capacitance Change ∆ C/C ≤ 5%
DF Change (∆tgδ) ≤ 30 x 10-4 at 1 kHz
Insulation Resistance ≥ 50% of limit value
Endurance
Test Conditions
Temperature 125°C ±2°C
Test Duration 2,000 hours
Voltage Applied 1.25 x VC
Performance
Capacitance Change ∆ C/C ≤ 3%
DF Change (∆tgδ) ≤ 30 x 10-4 at 1 kHz
Insulation Resistance ≥ 50% of limit value
Rapid Change of Temperature
Test Conditions
Temperature 1 hour at -55°C, 1 hour at +125°C
Number of Cycles 1,000
Performance
Capacitance Change ∆ C/C ≤ 5%
DF Change (∆tgδ) ≤ 50 x 10-4 at 1 kHz
Insulation Resistance ≥ limit value
No Mechanical Damage
Environmental Compliance
All KEMET surface mount capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 5
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Table 1 – Ratings & Part Number Reference
(1) G = ±2%, J = ±5%.
VDC Cap Value
(µF) Size Code Dimensions in mm Chip Size New KEMET
Part Number
Legacy Part
Number
B H L
16 0.012 A1.7 1.1 3.3 1206 DBAA2120(1)C5N0 LDBAA2120(1)C5N0
16 0.015 A1.7 1.1 3.3 1206 DBAA2150(1)C5N0 LDBAA2150(1)C5N0
16 0.018 A1.7 1.1 3.3 1206 DBAA2180(1)C5N0 LDBAA2180(1)C5N0
16 0.022 A 1.7 1.1 3.3 1206 DBAA2220(1)C5N0 LDBAA2220(1)C5N0
16 0.027 A 1.7 1.1 3.3 1206 DBAA2270(1)C5N0 LDBAA2270(1)C5N0
16 0.033 A 1.7 1.1 3.3 1206 DBAA2330(1)C5N0 LDBAA2330(1)C5N0
16 0.039 A 1.7 1.2 3.3 1206 DBAA2390(1)C5N0 LDBAA2390(1)C5N0
16 0.047 A1.7 1.3 3.3 1206 DBAA2470(1)C5N0 LDBAA2470(1)C5N0
16 0.056 B 2.5 1.7 3.3 1210 DBAB2560(1)C5N0 LDBAB2560(1)C5N0
16 0.068 B 2.5 1.7 3.3 1210 DBAB2680(1)C5N0 LDBAB2680(1)C5N0
16 0.082 B 2.5 1.7 3.3 1210 DBAB2824(1)C5N0 LDBAB2824(1)C5N0
16 0.10 B2.5 2.0 3.3 1210 DBAB3100(1)C5N0 LDBAB3100(1)C5N0
50 0.0033 A1.7 1.1 3.3 1206 DBCA1330(1)C5N0 LDBCA1330(1)C5N0
50 0.0039 A1.7 1.1 3.3 1206 DBCA1390(1)C5N0 LDBCA1390(1)C5N0
50 0.0047 A1.7 1.1 3.3 1206 DBCA1470(1)C5N0 LDBCA1470(1)C5N0
50 0.0056 A1.7 1.1 3.3 1206 DBCA1560(1)C5N0 LDBCA1560(1)C5N0
50 0.0068 A1.7 1.1 3.3 1206 DBCA1680(1)C5N0 LDBCA1680(1)C5N0
50 0.0082 A1.7 1.1 3.3 1206 DBCA1820(1)C5N0 LDBCA1820(1)C5N0
50 0.010 A1.7 1.1 3.3 1206 DBCA2100(1)C5N0 LDBCA2100(1)C5N0
50 0.012 A1.7 1.1 3.3 1206 DBCA2120(1)C5N0 LDBCA2120(1)C5N0
50 0.015 B2.5 1.4 3.3 1210 DBCB2150(1)C5N0 LDBCB2150(1)C5N0
50 0.018 B2.5 1.5 3.3 1210 DBCB2180(1)C5N0 LDBCB2180(1)C5N0
50 0.022 B 2.5 1.5 3.3 1210 DBCB2220(1)C5N0 LDBCB2220(1)C5N0
50 0.027 B 2.5 1.5 3.3 1210 DBCB2270(1)C5N0 LDBCB2270(1)C5N0
50 0.033 B 2.5 1.7 3.3 1210 DBCB2330(1)C5N0 LDBCB2330(1)C5N0
50 0.039 B 2.5 1.9 3.3 1210 DBCB2390(1)C5N0 LDBCB2390(1)C5N0
50 0.047 B2.5 2.3 3.3 1210 DBCB2470(1)C5N0 LDBCB2470(1)C5N0
50 0.056 C3.3 1.7 4.7 1812 DBCC2560(1)C5N0 LDBCC2560(1)C5N0
50 0.068 C3.3 1.7 4.7 1812 DBCC2680(1)C5N0 LDBCC2680(1)C5N0
50 0.082 C3.3 1.7 4.7 1812 DBCC2824(1)C5N0 LDBCC2824(1)C5N0
50 0.10 C3.3 2.0 4.7 1812 DBCC3100(1)C5N0 LDBCC3100(1)C5N0
VDC Cap Value
(µF) Size Code B (mm) H (mm) L (mm) Chip Size New KEMET
Part Number Legacy Part Number
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 6
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Soldering Process
Reow Recommendations
Preheating
Maximum Preheating Time 180 seconds
Minimum Temperature 150°C
Maximum Temperature 200°C
Maximum Time within Tmax and
Tmax – 5°C (∆T5)
30 seconds (Tmax ≤ 250°C)
10 seconds (250 °C < Tmax ≤ 260°C)
Maximum Time Over 217°C
(∆T217) 150 seconds
Maximum Temperature Ramp Rate
3°C/seconds (heating)
6°C/seconds (cooling)
Second reow
If two reow processes are needed, be sure that before the second reow,
the temperature on the capacitor’s surface is lower than 50°C.
Maximum Temperature on Component Body (Tmax)
Capacitor Capacitor Volume (mm3)
Hmax (mm) < 350 350 – 2,000 > 2,000
< 1.6 255°C * 255°C * 255°C *
1.6 – 2.5 255°C * 250°C 245°C
> 2.5 250°C 245°C 245°C
*In line with JEDEC STD 020D ed. June 2007 with some limitations.
Marking
• KEMET
• Capacitance
• Rated voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 7
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Packaging Quantities
Chip Size (EIA) Height (mm) Reel
1206 1.1 3000
1206 1.2 3000
1210 1.5 2250
1210 1.6 2250
1210 1.7 2250
1210 1.8 2250
1210 2.0 2250
1210 2.1 2250
1812 1.7 4000
1812 1.8 4000
1812 2.2 3000
1812 2.5 3000
1812 2.6 3000
Landing
Size Dimensions in mm
ABCD
1206 1.5 1.1 2.3 4.5
1210 2.3 1.1 2.3 4.5
1812 31.7 3.1 6.5
These landing area dimensions have the aim of taking full advantage of the new RoHS 6
terminations design.
We suggest to use a Sn/Ag/Cu solder paste (suggested thickness: 0.10 – 0.15 mm).
If a NOT Lead Free solder paste is used, a minimum peak temperature of 210°C on the
component’s body is suggested.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 8
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Carrier Taping & Packaging (IEC 60286–2)
Horizontal Taping Orientation
Chip Size (EIA)
Horizontal
Mounting
Dimensions in mm Taping Specication
B H L WP
1
A
0
B
0
K
0
DW
1
W
Nominal
+/-0.1
Nominal
Nominal
Nominal
-/+2.0
-0/+2
1206 1.7 All 3.3 8 4 2 3.8 1.3 180 812
1210 2.5 All 3.3 8 4 3 3.8 2.1 180 812
1812 3.3 ≤ 1.9 4.7 12 83.8 5.3 2330 12 16
1812
2.1 – 2.4
8
3.9
5.2
2.6
330
12
D
W
2
W
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 9
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Novi, MI
Tel: 248-994-1030
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39- 051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 10
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3082_LDB • 7/17/2012 11
Film Surface Mount Capacitors
General Purpose, High Stability and AC Line EMI Suppression – LDB Series Unencapsulated Winding, Size 1206 – 1812, 16 & 50 VDC
Digitally signed by: Marcy Brand
DN: o=KEMET Corporation
Location: Fort Lauderdale, FL
Date: D:2012.07.30
10:14:42-05'00'