www.vishay.com For technical questions, contact: te1resistors@vishay.com Document Number: 68003
16 Revision: 07-Jun-10
TCN
Vishay Techno
Thick Film Capacitor Networks,
Single-In-Line, Conformal Coated SIP
FEATURES
•Isolated and bussed schematics available
•NP0 or X7R capacitors for line terminator
•Wide operating temperature range (- 55 °C to
125 °C)
•Epoxy based conformal coating
•Solder coated copper terminals
•Solderability per MIL-STD-202 method 208E
•
Marking resistance to solvents per MIL-STD-202 method 215
•Compliant to RoHS directive 2002/95/EC
•Halogen-free according to IEC 61249-2-21 definition
Notes
(1) NP0 capacitors may be substituted for X7R capacitors
(2) Tighter tolerances available on request
* Pb containing terminations are not RoHS compliant, exemptions may apply
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SCHEMATIC
CAPACITANCE RANGE CAPACITANCE TOLERANCE (2)
± %
CAPACITANCE VOLTAGE
VDC
NP0 (1) X7R
TCN
01 33 pF to 3900 pF 470 pF to 0.1 µF 10, 20 50
02 33 pF to 3900 pF 470 pF to 0.1 µF 10, 20 50
09 33 pF to 3900 pF 470 pF to 0.1 µF 10, 20 50
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TCN0801N101KTB (preferred part number format)
GLOBAL
MODEL PIN
COUNT SCHEMATIC CHARACTERISTICS CAPACITANCE
VALUE TOLERANCE TERMINAL
FINISH PA C K AG I N G
TCN
06 to 12 pin
available
06
= 6 pin
08
= 8 pin
12
= 12 pin
01
02
09
N
= NP0
X
= X7R (In picofarads)
2 digit significant
figure, followed by
a multiplier
101
= 100 pF
392
= 3000 pF
104
= 0.1 µF
K
= 10 %
M
= 20 %
T
= Sn90/Pb10
C =
Sn95.5/Ag3.9/Cu0.6
B
= Bulk
Historical Part Numbering: TCN0801101KS10 (will continue to be accepted)
TCN 08 01 101 K S10
HISTORICAL
MODEL PIN COUNT SCHEMATIC CAPACITANCE
VALUE TOLERANCE TERMINAL FINISH
0801 101NCN KBT T
Document Number: 68003 For technical questions, contact: te1resistors@vishay.com www.vishay.com
Revision: 07-Jun-10 17
TCN
Thick Film Capacitor Networks,
Single-In-Line, Conformal Coated SIP Vishay Techno
Note
• Custom schematics available
SCHEMATICS
SCHEMATIC 01 SCHEMATIC 02 SCHEMATIC 03
nn-14321
CCC C C
nn-14321
CC C
1nn-1432
CCC C
DIMENSIONS in inches (millimeters)
NUMBER OF PINS A
(Max.)
B
± 0.005 (0.127)
C
(Max.)
6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89)
7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89)
8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89)
9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89)
10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89)
11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89)
12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89)
0.130
(3.30)
Max.
0.010 0.002
(0.254 0.051)
(Seating
Plane)
0.020 0.002
(0.508 0.051)
0.125 0.015
(3.18 0 .381)
C
Max.
A Max.
B
Pin #1 Identifier
±
±
±
±
±
±
0.100 ± 0.005
(2.54 ± 0.127)
Non-Cumulative
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
