FSS52BCL-160.000 - Fox Electronics, Inc.

FOX

Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com

EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221

Rev. 12/9/2008

RoHS Compliant / Pb Free

http://www.foxonline.com/need_a_sample.htm

Model: FSS52 Series

Page 1 of 3

OUTPUT (Pin 3)

ACTIVE

High Z

• EnAblE / DiSAblE FunCtiOn

INH (Pin 1)

OPEN 2

'1' Level Vih ≥ 70% Vdd

'0' Level Vil ≤ 30% Vdd

13.000 ~ 160.000 MHz

-55ºC ~ +125ºC

±100 PPM1

2.5V ± 5%

20mA

25mA

30mA

5nS

4nS

3nS

5nS

4nS

3nS

40% ~ 60%

10% Vdd

90% Vdd Min

8mA Min

-8mA Min

15pF

10µA

10mS

100nS

2mS

10mS

±0.25% ~ ±2.0%

-0.5% ~ -4.0%

±3 PPM/Year

260ºC / 10 Seconds

PARAMETERS

Frequency Range (Fo)

Storage Temperature Range (Tstg)

Frequency Stability (demodulated frequency)

Supply Voltage (Vdd)

Input Current (Idd)

13.000000 ~ 79.999999 MHz

80.000000 ~ 99.999999 MHz

100.000000 ~ 160.000000 MHz

Rise Time (10% ~ 90% Vdd) (Tr)

13.000000 ~ 49.999999 MHz

50.000000 ~ 79.999999 MHz

80.000000 ~ 160.000000 MHz

Fall Time (90% ~ 10% Vdd) (Tf)

13.000000 ~ 49.999999 MHz

50.000000 ~ 79.999999 MHz

80.000000 ~ 160.000000 MHz

Output Symmetry (50% Vdd)

Output Voltage (HCMOS)

Output Low (Vol)

Output High (Voh)

Output Current (Iol)

(Ioh)

Output Load

Standby Current (FSS53S)

Startup Time

Disable Time

Enable Time

FSS52B (Tristate)

FSS52S (Standby)

Spread Spectrum Function

(See Model Selection Guide, Page 2)

Center Spread

Down Spread

Aging

Maximum Soldering Temp / Time

Moisture Sensitivity Level (MSL)

Termination Finish

• ElECtRiCAl CHARACtERiStiCS

MAX (unless otherwise noted)

1 Inclusive of initial frequency tolerance and operating temperature range.

(Other stabilities to ±20 PPM available.)

2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.

Note: Drawing is for reference to critical specications dened by size measurements.

Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may

vary. The above specications, having been carefully prepared and checked, are believed to be

acurate at the time of publication; however, no responsibility is assumed by Fox Electronics for

inaccuracies. All specications subject to change without notice.

All dimensions are in millimeters.

5.2 Max

1.3 Max

Solder Pad Layout

Recommended

3.4 Max

1.2

Pin Connections

#1 E/D

#2 GND #3 Output

#4 V DD

1.0

2.2

1.6

2.54

1.4

# 1 # 2

# 4 # 3

# 1 # 2

# 3# 4

1.2±0.2

2.54±0.2

Top

View

Dot denotes

pin 1

Bottom

View

HCMOS 5x3.2mm 2.5V SMD Oscillator

Spread Spectrum

Fox Electronics Spread Spectrum Oscillators use industry-leading, proven, analog technologies which allows

them to be used in a wide range of high-performance applications. These products offer various down-spread and

center-spread options, enabling the customer to optimize the EMI reduction for their application requirements.

FOX

Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com

EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221

HCMOS 5x3.2mm 2.5V SMD Oscillator Rev. 12/9/2008

RoHS Compliant / Pb Free

http://www.foxonline.com/need_a_sample.htm

Model: FSS52 Series

Page 3 of 3

• tAPE SPECiFiCAtiOnS (millimeters)

MODEl

FSS52 Series

∅1.5

4.0

8.0

5.5

12.0

1.4

STD Reel QTY

1,000

• REEl SPECiFiCAtiOnS (millimeters)

2.0

∅13

∅21

∅62

∅180

12.2

1.6

MODEl

FSS52 Series

Spread Spectrum