© 2004 Fairchild Semiconductor Corporation DS012139 www.fairchildsemi.com
June 1996
Revised August 2004
NC7S04 TinyLogic
HS Inverter
NC7S04
TinyLogic HS Inverter
General Description
The NC7 S04 is a single hig h per forman ce CMOS Invert er.
Advanced Silicon Gate CMOS fabrication assures high
speed and low power circuit operation over a broad VCC
range. ESD protection diodes inherently guard both input
and output with respect to the VCC and GND rails. Three
stages of gain between input and output assures high
noise immunity and reduced sensitivity to input edge rate.
Features
■Space saving SOT23 or SC70 5-lead package
■Ultra small MicroPak leadless packa ge
■High Spee d: tPD = 3 ns typ
■Low Quiescent Power: ICC < 1 µA
■Balanced Output Drive : 2 mA IOL, −2 mA IOH
■Broad VCC Operating Range: 2V – 6V
■Balanced P rop aga tion Dela ys
■Specified for 3V operation
Ordering Code:
Logic Symbol
IEEE/IEC
Pin Descriptions
Function Table
H = HIGH Logic Level
L = LOW Logic Le v el
Connection Diagrams
Pin Assignments f or SC70 and SOT23
(Top View)
Pad Assignments for MicroPak
(Top Thru View)
TinyLogic is a reg is t ered trademark of F airc hild Semiconduc t or Corpo ration.
MicroPak is a trad em ark of Fairchild Sem icond uc t or Corporation.
Order Number Package Product Code Packag e Descript ion Supp lie d As
Numbe r Top Mark
NC7S04M5X MA05B 7S04 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel
NC7S04P5X MAA05A S04 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel
NC7S04L6X MAC06A AA 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel
Pin Names Descri ption
A Input
Y Output
NC No Connect
Y = A
Input Output
AY
LH
HL
www.fairchildsemi.com 2
NC7S04
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions (Note 2)
Note 1: Absolute maximum ratings are those values beyond which damage
to the device may occur. The databook specifications should be met, with-
out exception, to ensure that the system design is reliable over its power
supply, temperatu re, and output /input lo ading variable s. Fairch ild do es not
recomm end operation of c irc uits outsi de t he data book specif ic ations.
Note 2: Unu s ed inputs m ust be he ld H I GH or LOW. They ma y not fl oat.
DC Electrical Characteristics
Supply Voltag e (VCC)−0.5V to +7.0V
DC Input Diode Current (IIK)
@VIN ≤ −0.5V −20 mA
@VIN ≥ VCC + 0.5V +20 mA
DC Input Voltage (VIN)−0.5V to VCC +0.5V
DC Output Diode Current (IOK)
@VOUT ≤ −0.5V −20 mA
@VOUT ≥ VCC + 0.5V +20 mA
DC Output Voltage (VOUT)−0.5V to VCC +0.5V
DC Output Source or Sink
Current (IOUT)±12.5 mA
DC VCC or Ground Curre nt per
Output Pin (ICC or IGND)±25 mA
Storage Temperature (TSTG)−65°C to +150°C
Junction Temperature (TJ)150°C
Lead Temperature (TL)
(Soldering, 10 seconds) 260°C
Power Dissipation (PD) @ +85°C
SOT23-5 200 mW
SC70-5 150 mW
Supply Voltage (VCC) 2.0V to 6.0V
Input Voltage (VIN) 0V to VCC
Output Voltage (V OUT) 0V to VCC
Operating Temperature (TA)−40°C to +85°C
Input Rise and Fall Time (tr, tf)
VCC @ 2.0V 0 to 1000 ns
VCC @ 3.0V 0 to 750 ns
VCC @ 4.5V 0 to 500 ns
VCC @ 6.0V 0 to 400 ns
Thermal Resistance (θJA)
SOT23-5 300°C/W
SC70-5 425°C/W
Symbol Parameter VCC T
A = +25°CT
A = −40°C to +85°CUnits Conditions
(V) MinTypMaxMinMax
VIH HIGH Level Input Voltage 2.0 1.50 1.50 V
3.0 - 6.0 0.7 VCC 0.7 VCC
VIL LOW Level Input Voltage 2.0 0.50 0.50 V
3.0 - 6.0 0.3 VCC 0.3 VCC
VOH HIGH Level Output Voltage 2.0 1.90 2.0 1.90
V
3.02.903.0 2.90 I
OH = −20 µA
4.54.404.5 4.40 V
IN = VIL
6.05.906.0 5.90
V
VIN = VIL
3.0 2.68 2.85 2.63 IOH = −1.3 mA
4.5 4.18 4.35 4.13 IOH = −2.0 mA
6.0 5.68 5.85 5.63 IOH = −2.6 mA
VOL LOW Level Output Voltage 2.0 0.0 0.10 0.10
V
3.0 0.0 0.10 0.10 IOL = 20 µA
4.5 0.0 0.10 0.10 VIN = VIH
6.0 0.0 0.10 0.10
V
VIN = VIH
3.0 0.1 0.26 0.33 IOL = 1.3 mA
4.5 0.1 0.26 0.33 IOL = 2.0 mA
6.0 0.1 0.26 0.33 IOL = 2.6 mA
IIN Input Leakage Current 6.0 ±0.1 ±1.0 µAV
IN = VCC, GND
ICC Quiescent Supply Current 6.0 1.0 10.0 µAV
IN = VCC, GND
3 www.fairchildsemi.com
NC7S04
AC Electrical Characteristics
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynam ic operating current by th e ex pression:
ICCD = (CPD) (VCC) (fIN) + (I CCstatic).
AC Loading and Waveforms
CL include s l oad and str ay c apacitan ce
Input PRR = 1.0 MHz, t w = 500 ns
FIGURE 1. AC Test Circuit
Input = AC Waveforms;
PRR = Variable; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
FIGURE 3. AC Waveforms
Symbol Parameter VCC T
A = +25°CT
A = −40°C to +85°CUnits Conditions Figure
(V) Min Typ Max Min Max Number
tPLH, Propagation Delay 5.0 3.0 15.0 ns CL = 15 pF
Figures
1, 3
tPHL 2.0 18.0 100.0 125.0
ns CL = 50 pF
3.0 10.0 27.0 35.0
4.5 7.0 20.0 25.0
6.0 6.0 17.0 21.0
tTLH, Output Transition Time 5.0 3.0 10.0 ns CL = 15 pF
Figures
1, 3
tTHL 2.0 25.0 125.0 155.0
ns CL = 50 pF
3.0 16.0 35.0 45.0
4.5 11.0 25.0 31.0
6.0 9.0 21.0 26.0
CIN Input Capacitance Open 2.0 10.0 10.0 pF
CPD Power Dissipation Capacitance 5.0 6.0 pF (Note 3) Figure 2
www.fairchildsemi.com 4
NC7S04
Tape and Reel Specification
TAPE FOR MAT FOR SOT23, SC70
TAPE DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover T ape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
M5X, P5X Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Package Tape Size DIM A DIM B DIM F DIM KoDIM P1 DIM W
SC70-5 8 mm 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0. 157 0.315 ± 0.004
(2.35) (2.45) (3.5 ± 0.10) (1.35 ± 0.10) (4) (8 ± 0.1)
SOT23-5 8 mm 0.130 0.130 0.138 ± 0.002 0.055 ± 0.004 0. 157 0.315 ± 0.012
(3.3) (3.3) (3.5 ± 0.05) (1.4 ± 0.11) (4) (8 ± 0.3)
5 www.fairchildsemi.com
NC7S04
Tape and Reel Specification (Continu ed)
TAPE FORMAT FOR MicroPak
TAPE DIMENSIONS inches (millimeters)
REEL DIMENSIONS inches (millimeters)
Packa ge Tap e Number Ca vit y Cover Tape
Designator Section Cavities Status Status
L6X Leader (Start End) 125 (typ) Empty Sealed
Carrier 5000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Tape
Size ABCDN W1 W2 W3
8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00)
www.fairchildsemi.com 6
NC7S04
Physical Dimensions inches (millimeters) unless otherwise noted
5-Lead SOT23, JEDEC MO-178, 1.6mm
Package Number MA05B
7 www.fairchildsemi.com
NC7S04
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
Package Number MAA05A
www.fairchildsemi.com 8
NC7S04 TinyLogi c
HS Inverter
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead Mic roPak, 1.0mm Wide
Package Number MAC06A
Fairchild does not assu me any responsibility for use of any circuitry de scribed, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syste ms are devices or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical compon ent i n any compon ent of a lif e supp ort
device or system whose failure to perform can be rea-
sonabl y ex pect ed to ca use the fa ilu re of the li fe su pp ort
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
