AON3816 20V N-Channel MOSFET General Description Product Summary The AON3816 uses advanced trench technology to provide excellent RDS(ON), low gate charge and operation with gate voltages as low as 1.8V while retaining a 12V VGS(MAX) rating. It is ESD protected. This device is suitable for use as a uni-directional or bi-directional load switch, facilitated by its common-drain configuration. VDS ID (at VGS=4.5V) 20V 4A RDS(ON) (at VGS = 4.5V) < 22m RDS(ON) (at VGS = 4V) < 23m RDS(ON) (at VGS = 2.5V) < 28m ESD Protected DFN 3x3 Top View D2 D1 Bottom View Top View S2 G2 S1 G1 1 2 3 4 8 7 6 5 D2 D2 G1 D1 D1 G2 S2 S1 Pin 1 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage Continuous Drain Current F VGS TC=25C Pulsed Drain Current B Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A Maximum Junction-to-Lead C Rev 4: July 2010 Steady-State Steady-State A 2.5 W 1.6 TJ, TSTG Symbol t 10s V 40 PD TC=70C 12 3.1 IDM TC=25C Power Dissipation F Units V 4 ID TC=70C Maximum 20 RJA RJL www.aosmd.com -55 to 150 Typ 40 75 30 C Max 50 95 40 Units C/W C/W C/W Page 1 of 5 AON3816 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS Drain-Source Breakdown Voltage BVDSS IDSS Zero Gate Voltage Drain Current Conditions Min ID=250A, VGS=0V TJ=55C Gate-Body leakage current VDS=0V, VGS= 10V VDS=VGS ID=250A 0.3 ID(ON) On state drain current VGS=4.5V, VDS=5V 40 VGS=4.5V, ID=4A TJ=125C VGS=4V, ID=4A VGS=2.5V, ID=4A 10 A 0.7 1.1 V 18 22 23 29 19 23 m 22.5 28 m A gFS Forward Transconductance VDS=5V, ID=4A 33 VSD Diode Forward Voltage IS=1A,VGS=0V 0.6 IS Maximum Body-Diode Continuous Current DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=10V, f=1MHz Qgs Gate Source Charge Qgd Gate Drain Charge tD(on) Turn-On DelayTime tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time VGS=4.5V, VDS=10V, ID=4A S 1 V 3.5 A 1100 pF 920 110 155 200 pF 45 75 105 pF 2.4 k 8.8 11 13 1.6 2 2.4 nC 1.9 3.2 4.5 nC nC s 0.3 VGS=5V, VDS=10V, RL=2.5, RGEN=3 m 730 VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Qg Total Gate Charge A 5 Gate Threshold Voltage Units V 1 VGS(th) Static Drain-Source On-Resistance Max 20 VDS=20V, VGS=0V IGSS RDS(ON) Typ 0.6 s 7.9 s 4.4 s A: The value of RJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The value in any given application depends on the user's specific board design. B: Repetitive rating, pulse width limited by junction temperature. C. The RJA is the sum of the thermal impedence from junction to lead RJL and lead to ambient. D. The static characteristics in Figures 1 to 6 are obtained using <300 s pulses, duty cycle 0.5% max. E. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25C. The SOA curve provides a single pulse rating. F. The power dissipation and current rating is based on the t 10s thermal resistance, and current rating is also limited by wire-bonding. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 4: July 2010 www.aosmd.com Page 2 of 5 AON3816 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 40 20 10V VDS=5V 3V 4V 15 20 ID(A) ID (A) 30 2V 10 125C 5 10 25C VGS=1.5V 0 0 0 1 2 3 4 0 5 VDS (Volts) Fig 1: On-Region Characteristics (Note E) Normalized On-Resistance VGS=2.5V 25 RDS(ON) (m ) 1 1.5 2 VGS(Volts) Figure 2: Transfer Characteristics (Note E) 2.5 1.8 30 20 15 VGS=3.1V 10 VGS=4.5V VGS=2.5V ID=4A 1.6 VGS=4V ID=4A 1.4 17 VGS=4.5V ID=4A 5 1.2 2 10 1 0.8 5 0 5 10 15 0 20 25 50 75 100 125 150 175 Temperature (C) 0 Figure 4: On-Resistance vs. Junction 18Temperature (Note E) ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 40 1.0E+02 ID=4A 35 1.0E+01 40 1.0E+00 30 125 25 IS (A) RDS(ON) (m ) 0.5 20 1.0E-02 15 1.0E-03 10 125 1.0E-01 25 1.0E-04 25 1.0E-05 5 0 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev 4: July 2010 2 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 5 AON3816 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 1400 5 VDS=10V ID=4A 1200 Capacitance (pF) VGS (Volts) 4 3 2 Ciss 1000 800 600 Coss 400 1 200 0 0 2 4 6 8 10 12 Qg (nC) Figure 7: Gate-Charge Characteristics 14 0 5 10 15 VDS (Volts) Figure 8: Capacitance Characteristics TJ(Max)=150C TA=25C 10s 10s RDS(ON) 10.0 Power (W) 100s 1ms 10ms 1.0 80 17 5 2 10 40 0.1 TJ(Max)=150C TA=25C DC 0.0 0 0.01 0.1 1 VDS (Volts) 10 100 0.0001 0.001 10 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC 1 0.01 0.1 1 10 0 100 Pulse Width (s) 18Junction-toFigure 10: Single Pulse Power Rating Case (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Z JA Normalized Transient Thermal Resistance 20 120 100.0 ID (Amps) Crss 0 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 40 RJA=95C/W 0.1 PD 0.01 Single Pulse Ton T 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev 4: July 2010 www.aosmd.com Page 4 of 5 AON3816 AON3816 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds 90% + Vdd DUT Vgs VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR = 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds Isd Vgs Ig Rev 4: July 2010 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 5 of 5