CT3209 4mm Digital Multimeter Fused Probe Individual color, fused probe body w/4 mm banana plug contact... Description Individual standard size fused probe body with a 4 mm banana plug contact on the tip. Its fuse is rated at 500 mA, 660 V. A removable tip safety cap provides 1,000 V CAT III / 600 V CAT IV protection per IEC 61010-031. Remove the cap to accessthe 4 mm contact for plugging directly into a banana jack or adding an accessory. The tip is additionally protected by a spring loaded clear plastic sheath. Unscrew the forward portion of the bodyto access and replace the 6 x 32 mm fast acting ceramic fuse. The probe body is marked with the rating of the internal fuse. Body acceptsa 4 mm sheath (safety) banana plug test lead. Features: - Standard size body: 115mm (4.5") length - Tip: Brass, Nickel Plated - 4 mm banana plug contact: BeCu, Nickel Plated - Safety cap matches color of probe - Replaceable ceramic fuse:Model CT3195, 500 mA/660 V, 6 x 32 mm - Black and red colors standard; other colors available as special order Model CT2576 Insulated Probe Sprung Hook works with thisprobe body. Black and red pair available asModel CT3210. Warning: Theexposed tip without safety caplimits the probe to CAT II measurement categories. Datasheet Technical data subject to change. (c) Cal Test Electronics 2018. caltestelectronics.com All specifications apply to the unit after a temperature stabilization time of 20 minutes over an ambient temperature range of 25C 5C. Specifications IEC Rating (probe body) 1,000 V CAT III / 600 V CAT IV w/safety cap1,000 V CAT I Voltage (fuse) 660 V Current Max (fuse) 500 mA Interrupting Rating (fuse) 30 kA Temperature (degrees) -20 to +40C RoHS (2011/65/EU) Compliant Specifications are subject to change without notice. To ensure the most current version of this manual, please download the current version from our website: caltestelectronics.com Technical data subject to change. (c) Cal Test Electronics 2018. caltestelectronics.com