3
P/N:PM0139 REV. 3.3, OCT. 18, 2001
MX23C1610
DC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 5V±10%)
Item Symbol MIN. MAX. Conditions
Output High Voltage V OH 2.4V - IOH = -1.0mA
Output Low Voltage V OL - 0.4V IOL = 2.1mA
Input High Voltage VIH 2.2V VCC+0.3V
Input Low Voltage VIL -0.3V 0.8V
Input Leakage Current ILI - 10uA 0V, VCC
Output Leakage Current ILO - 10uA 0V, VCC
Operating Current ICC1 - 60mA f=5MHz, all output open,
CE=VIL, OE=VIH
Standby Current (TTL) ISTB1 - 1mA CE = VIH
Standby Current (CMOS) ISTB2 - 50uA CE>VCC-0.2V
Input Capacitance CIN - 10pF Ta = 25°C , f = 1MHZ
Output Capacitance COUT - 10pF Ta = 25°C, f = 1MHZ
AC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 5V±10%)
Item Symbol 23C1610-10 23C1610-12 23C1610-15
MIN. MAX. MIN. MAX. MIN. MAX.
Read Cycle Time tRC 100ns - 120ns - 150ns -
Address Access Time tAA - 100ns - 120ns - 150ns
Chip Enable Access Time tACE - 100ns - 120ns - 150ns
Output Enable Time tOE - 50ns - 60ns - 70ns
Output Hold After Address tO H 0ns - 0ns - 0ns -
Output High Z Delay tHZ - 20ns - 20ns - 20ns
Note:Output high-impedance delay (tHZ) is measured
from OE or CE going high, and this parameter guaran-
teed by design over the full voltage and temperature
oper ating range - not tested.
ABSOLUTE MAXIMUM RATINGS
Item Symbol Ratings
Voltage on any Pin Relative to VSS VIN -0.5V to 7.0V
Ambient Operating Temperature Topr 0°C to 70°C
Storage T emperature Tstg -65°C to 125°C
Note: Minim um DC voltage on input or I/O pins is -0.5V. During voltage tr ansitions, inputs ma y undershoot VSS to -
1.3V f or periods of up to 20ns. Maxim um DC v oltage on input or I/O pins is VCC+0.5V. During voltage transitions ,
input ma y ov ershoot VCC to VCC+2.0V f or periods of up to 20ns.