E n gi n e e r i n g B u l l et i n o 105 C Surface Mount Type Aluminum Electrolytic Capacitors AlchipTM * * * * No. 707A June 2001 NE W MVT series Feature! 4.5mm height Endurance: 105 oC 1000 hours Reflow capability Solvent-proof type 4 .5 mm hei ght * S P E CI F I CAT I ONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Test Characteristics -40 to +105oC 6.3 to 50Vdc 20% (M) (at 20oC, 120Hz) I = 0.01CV or 3A, whichever is greater (at 20oC, 2 minute) Where, I: max. leakage current (A), C: nominal capacitance, V: rated voltage (Vdc) Rated voltage (Vdc) 6.3 10 16 25 35 50 (at 20oC, 120Hz) tan (max.) 0.38 0.32 0.20 0.16 0.14 0.14 Rated voltage (Vdc) 6.3 10 16 25 35 50 (at 120Hz) Z(-25oC)/Z(20oC) 6 5 3 3 3 3 Z(-40oC)/Z(20oC) 10 10 6 6 4 4 The following specifications shall be satisfied when the capacitors are restored to 20oC after the rated voltage is applied for 1000 hours at 105oC. Rated voltage (Vdc) 6.3 to 16 25 to 50 < 30% of the initial measured value < 25% of the initial measured value Capacitance change < 300% of the initial specified value < 300% of the initial specified value D.F.(tan ) < The initial specified value < The initial specified value Leakage current * DI ME NS I ON S (mm) Case code D46 E46 F46 D 4 5 6.3 L 4.5 4.5 4.5 A 4.3 5.3 6.6 B 4.3 5.3 6.6 * P AR T NU MB E R I N G S Y S T E M MVT 16 VC 22 M E46 C 5.1 5.9 7.2 W 0.5 - 0.8 0.5 - 0.8 0.5 - 0.8 P 1.0 1.4 1.9 * MAR K I NG EX) 16V22F Case code Cap tolerance (20%) Nominal cap code Terminal type (VC) Rated voltage in volts Series name Code R1 R47 1 4R7 10 100 Capacitance 0.1F 0.47F 1.0F 4.7F 10F 100F - 1hT 22 16V + * S T ANDAR D R AT I N GS Vdc Cap(F) 0.10 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 6.3V 10V 16V 25V 35V 50V Case code Rated ripple current (mA rms) at 105* ,120Hz D46 * E46 F46 19 32 52 * E46 * 30 D46 E46 * F46 16 26 44 * * F46 42 D46 E46 F46 13 22 36 D46 D46 D46 D46 D46 D46 D46 E46 F46 0.9 2.2 2.8 3.3 5.4 9.6 12 16 26 Note: * Use next higher voltage part. NI P P ON CH E MI -CON COR P OR AT I ON MKA June 2001