SMALL CYLINDER LOW/MEDIUM-FREQUENCY QUARTZ CRYSTAL C-4-TYPE Uniform, stable performance due to photolithography finish. Small and light weight. (@1.5 x 6mm) * Excellent shock resistance and environmental capability. Most suitable for pagers and card products like PCMCIA. Actual size @ Specifications (characteristics) itern . Symbot ; Specifications Remarks Nominal frequency f 32.000 kHz to 100.000 KHz Please refer to frequency list below 192 kHz Temperature Storage temperature Tste -20C to +70C range Operating temperature] Torr -10C to +60C Maximum drive tevel GL 1.0uW max. Recommended drive level (characteristics) DL 0.1pW typ. Soldering condition Tsoi Under 280C with in 5 sec. Do not heat the package to more than 150C Frequency tolerance (standard) Att +50ppm,+100ppm Ta=25C. DL=0.1pW Peak temperature (frequency) eT 25C +5C Temperature coefficient (frequency) a -0.04ppm/C* max. Load capacitance CL 6pF to oo Please specify 32 kHz <f < 40 kHz: 55 kQ max. 40 kHz < f < 60 kHz: 30 kQ max. Series resistance Ri 60 kHz <f < 70 kHz: 25 kQ max. 70 kHz <f < 100 kHz: 22 kQ max. 192 kHz: 10 kQ max. Motional capacitance C 3.0fF max. Shunt capacitance Co 1.5pF max. insulation resistance IR 500 MQ min. Aging fa +Sppmvyear max. Ta=25C+#3C. first year . 5 Three drops on a hard board from 75 cm or excitation Shock resistance SR. toppm max. test with 3000G x 0.3ms x 1/2 sine wave x 3 directions M Frequency example @ External dimensions (Unit: mm) Type Frequency ; CL Value 26.6667 kHz 10.0pF. 11.0pF 32.5600 kHz 7.0pF 36.8640 kHz 13.5pF 38.4000 kHz 10.0pF 44.7340 kHz 10.0pF C-2-TYPE 48,0000 kHz 15.0pF 75.0000 kHz 6.5pF, 9.0pF.20.0pF | Li Lb 77.5030 kHz 10.0pF, 20.0pF | ' 76,8000 kHz 6.0pF, 10.0pF,11.0pF 96.0000 kHz B.OpF, 8.4pF,11.0pF | 153.6000 kHz 11.0pF G2" e000 a Oot c-002Rx | 6.0 4.0 min. max. C-004R 5.0 max. | 4.0 min. 1.5 max. G-4-TYPE 50.0000 kHz 9.0pF C-005R | 4.6 max. | 4.0 min. | ot.2 max. 76.8000 kHz 11.0pF 77.5030 kHz 10.0pF 192.0000 kHz 11.0pF i (307.2 kHz: D:=92.2 max.)