STB18NM60N, STF18NM60N, STI18NM60N STP18NM60N, STW18NM60N N-channel 600 V, 0.27 , 13 A MDmeshTM II Power MOSFET in TO-220, TO-220FP, TO-247, DPAK and IPAK Features Order codes VDSS (@Tjmax) RDS(on) max. ID PW STB18NM60N 110 W STF18NM60N 30 W STI18NM60N 650 V 2 3 3 1 1 DPAK TO-247 3 12 < 0.285 13 A STP18NM60N 110 W IPAK STW18NM60N 100% avalanche tested Low input capacitance and gate charge Low gate input resistance 3 3 1 2 1 TO-220FP TO-220 Application Figure 1. 2 Internal schematic diagram Switching applications $ Description These devices are made using the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. ' 3 !-V Table 1. Device summary Order codes Marking Package Packaging STB18NM60N 18NM60N DPAK Tape and reel STF18NM60N 18NM60N TO-220FP Tube STI18NM60N 18NM60N IPAK Tube STP18NM60N 18NM60N TO-220 Tube STW18NM60N 18NM60N TO-247 Tube October 2010 Doc ID 15868 Rev 3 1/18 www.st.com 18 Contents STB/F/I/P/W18NM60N Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ........................... 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 ............................................... 9 Doc ID 15868 Rev 3 STB/F/I/P/W18NM60N 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter DPAK,IPAK TO-220,TO-247 VDS Drain-source voltage (VGS =0) 600 VGS Gate- source voltage 25 Unit TO-220FP V 13 13 (1) A Drain current (continuous) at TC = 100 C 8.2 8.2 (1) A IDM (2) Drain current (pulsed) 52 52 (1) A PTOT Total dissipation at TC = 25 C 110 30 W ID ID Drain current (continuous) at TC = 25 C IAR Avalanche current, repetitive or not-repetitive (pulse width limited by TJ max) 4.5 A EAS Single pulse avalanche energy (starting TJ = 25 C, ID = IAR, VDD = 50 V) 350 mJ Peak diode recovery voltage slope 15 V/ns dv/dt(3) VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) TJ Tstg Operating junction temperature Storage temperature 2500 -55 to 150 V C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 13 A, di/dt 400 A/s, peak VDS V(BR)DSS Table 3. Symbol Thermal data Parameter DPAK IPAK TO-220 TO-247 TO-220FP Rthj-case Thermal resistance junction-case max 1.14 Rthj-amb Thermal resistance junction-amb max 62.5 Tl Maximum lead temperature for soldering purpose Doc ID 15868 Rev 3 50 300 Unit 4.17 C/W 62.5 C/W C 3/18 Electrical characteristics 2 STB/F/I/P/W18NM60N Electrical characteristics (TCASE=25 C unless otherwise specified) Table 4. Symbol On/off states Parameter Test conditions Min. Typ. Max. Unit Drain-source breakdown voltage ID = 1 mA, VGS= 0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS = Max rating,TJ=125 C 1 10 A A IGSS Gate body leakage current (VDS = 0) VGS = 25 V; VDS=0 100 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 A 4 V RDS(on) Static drain-source on resistance VGS= 10 V, ID=6.5 A V(BR)DSS Table 5. Symbol 600 2 V 3 0.260 0.285 Dynamic Parameter Test conditions Min. Typ. Input capacitance Output capacitance Reverse transfer capacitance VDS = 50 V, f =1 MHz, VGS = 0 Coss eq.(1) Output equivalent capacitance Rg Qg Qgs Qgd Ciss Coss Crss Max. Unit - 1000 60 3 - pF pF pF VDS = 0, to 480 V, VGS=0 - 225 - pF Intrinsic resistance f=1 MHz open drain - 3.5 - Total gate charge Gate-source charge Gate-drain charge VDD = 480 V, ID = 13 A VGS = 10 V (see Figure 18) - 35 6 20 - nC nC nC 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDS. Table 6. Symbol td(on) tr td(off) tf 4/18 Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 13 A, RG = 4.7 , VGS = 10 V (see Figure 17) Doc ID 15868 Rev 3 Min. Typ. - 20 22 50 40 Max. Unit - ns ns ns ns STB/F/I/P/W18NM60N Table 7. Symbol Electrical characteristics Source drain diode Parameter Test conditions Min. Typ. Max. Unit - 13 52 A A 1.6 V ISD ISDM (1) Source-drain current Source-drain current (pulsed) VSD(2) Forward on voltage ISD = 13 A, VGS=0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD =13 A, di/dt =100 A/s, VDD = 60 V (see Figure 19) - 300 4.0 25 ns C A Reverse recovery time Reverse recovery charge Reverse recovery current VDD = 60 V di/dt =100 A/s, ISD = 13 A Tj = 150C (see Figure 19) - 360 4.5 25 ns C A trr Qrr IRRM trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 s, duty cycle 1.5% Doc ID 15868 Rev 3 5/18 Electrical characteristics STB/F/I/P/W18NM60N 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220, DPAK, IPAK Figure 3. Thermal impedance for TO-220, DPAK, IPAK Figure 5. Thermal impedance for TO-220FP Figure 7. Thermal impedance for TO-247 AM05525v1 ) S( on 10 Op Lim era ite tion d by in th ma is a x R re a D is ID (A) 10s 100s 1ms 1 Tj=150C Tc=25C 10ms Sinlge pulse 0.1 0.1 Figure 4. 10 1 100 Safe operating area for TO-220FP AM05526v1 ID (A) 10 1 VDS(V) is ea ) ar S(on is th RD x in n ma o ti y ra d b e e p O mit Li 10s 100s 1ms 10ms Tj=150C Tc=25C 0.1 Sinlge pulse 0.01 0.1 Figure 6. 10 1 100 VDS(V) Safe operating area for TO-247 AM05527v1 10s a DS ( Op Lim era ite tion d by in th m is ax ar R e 10 on ) is ID (A) 100s 1ms 1 Tj=150C Tc=25C 10ms Sinlge pulse 0.1 0.1 6/18 1 10 100 VDS(V) Doc ID 15868 Rev 3 STB/F/I/P/W18NM60N Figure 8. Electrical characteristics Output characteristics ID (A) Figure 9. AM05528v1 VGS=10V 25 Transfer characteristics AM05529v1 ID (A) VDS=15V 25 6V 20 20 15 15 10 10 5V 5 5 4V 0 0 5 10 20 15 Figure 10. Static drain-source on resistance AM05530v1 RDS(on) () 0 0 VDS(V) 0.28 2 4 8 6 VGS(V) 10 Figure 11. Gate charge vs gate-source voltage AM05531v1 VGS (V) VDD=480V 12 ID=13A 0.27 500 VGS 10 0.26 400 VDS 0.25 8 0.24 6 300 0.23 200 4 0.22 0.20 0 100 2 0.21 4 2 6 8 10 Figure 12. Capacitance variations 1000 0 10 20 30 40 0 Qg(nC) Figure 13. Output capacitance stored energy AM05532v1 C (pF) 0 12 ID(A) AM05533v1 Eoss (J) 7 Ciss 6 5 100 4 Coss 10 2 Crss 1 0.1 3 1 10 100 VDS(V) Doc ID 15868 Rev 3 1 0 0 100 200 300 400 500 600 VDS(V) 7/18 Electrical characteristics STB/F/I/P/W18NM60N Figure 14. Normalized gate threshold voltage vs temperature AM05534v1 VGS(th) (norm) 1.10 Figure 15. Normalized on resistance vs temperature AM05535v1 RDS(on) (norm) 2.1 1.9 1.00 1.7 1.5 0.90 1.3 1.1 0.80 0.9 0.70 -50 -25 0.5 -50 -25 0.7 0 25 50 75 100 TJ(C) Figure 16. Normalized BVDSS vs temperature AM05536v1 BVDSS (norm) 1.07 1.05 1.03 1.01 0.99 0.97 0.95 0.93 -50 -25 8/18 0 25 50 75 100 TJ(C) Doc ID 15868 Rev 3 0 25 50 75 100 TJ(C) STB/F/I/P/W18NM60N 3 Test circuits Test circuits Figure 17. Switching times test circuit for resistive load Figure 18. Gate charge test circuit VDD 12V 47k 1k 100nF 3.3 F 2200 RL F VGS IG=CONST VDD 100 Vi=20V=VGMAX VD RG 2200 F D.U.T. D.U.T. VG 2.7k PW 47k 1k PW AM01468v1 AM01469v1 Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100H S 3.3 F B 25 1000 F D VDD 2200 F 3.3 F VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 21. Unclamped inductive waveform AM01471v1 Figure 22. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 Doc ID 15868 Rev 3 10% AM01473v1 9/18 Package mechanical data 4 STB/F/I/P/W18NM60N Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/18 Doc ID 15868 Rev 3 STB/F/I/P/W18NM60N Table 8. Package mechanical data TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 Figure 23. TO-220FP drawing mechanical data L7 E A B D Dia L5 L6 F1 F2 F G H G1 L4 L2 L3 7012510_Rev_K Doc ID 15868 Rev 3 11/18 Package mechanical data STB/F/I/P/W18NM60N D2PAK (TO-263) mechanical data Dim A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 mm Min Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 in c h Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8 0 0.4 0 Typ 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 2.54 4.88 15 2.49 2.29 1.27 1.30 0.208 0.624 0.106 0.110 0.055 0.069 0.016 0079457_M 12/18 Min Doc ID 15868 Rev 3 8 STB/F/I/P/W18NM60N Package mechanical data TO-220 type A mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q Typ 4.40 0.61 1.14 0.48 15.25 Max 4.60 0.88 1.70 0.70 15.75 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 16.40 28.90 3.75 2.65 3.85 2.95 0015988_Rev_S Doc ID 15868 Rev 3 13/18 Package mechanical data STB/F/I/P/W18NM60N TO-247 mechanical data Dim. mm. Min. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 oP 3.55 oR 4.50 S 14/18 Typ. 3.65 5.50 5.50 Doc ID 15868 Rev 3 STB/F/I/P/W18NM60N Package mechanical data IPAK (TO-262) mechanical data mm inch Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 Typ 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Doc ID 15868 Rev 3 Max Min 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 15/18 Packaging mechanical data 5 STB/F/I/P/W18NM60N Packaging mechanical data D 2 PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. 16/18 mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 MAX. B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 R 50 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.075 0.082 1.574 0.933 0.956 Doc ID 15868 Rev 3 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB/F/I/P/W18NM60N 6 Revision history Revision history Table 9. Document revision history Date Revision Changes 15-Jun-2009 1 First release 11-Nov-2009 2 - Added RDS(on) typical value - Added new package, mechanical data: IPAK - Document status promoted from preliminary data to datasheet 06-Oct-2010 3 Inserted new value in Table 5. Doc ID 15868 Rev 3 17/18 STB/F/I/P/W18NM60N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 Doc ID 15868 Rev 3