October 2010 Doc ID 15868 Rev 3 1/18
18
STB18NM60N, STF18NM60N, STI18NM60N
STP18NM60N, STW18NM60N
N-channel 600 V, 0.27 Ω, 13 A MDmesh™ II Power MOSFET
in TO-220, TO-220FP, TO-247, D²PAK and I²PAK
Features
■100% avalanche tested
■Low input capacitance and gate charge
■Low gate input resistance
Application
Switching applications
Description
These devices are made using the second
generation of MDmesh™ technology. This
revolutionary Power MOSFET associates a new
vertical structure to the company’s strip layout to
yield one of the world’s lowest on-resistance and
gate charge. It is therefore suitable for the most
demanding high efficiency converters.
Figure 1. Internal schematic diagram
Order codes VDSS
(@Tjmax)
RDS(on)
max. IDPW
STB18NM60N
650 V < 0.285 Ω13 A
110 W
STF18NM60N 30 W
STI18NM60N
110 WSTP18NM60N
STW18NM60N
TO-220 TO-220FP
D²PAK
123
12
3
TO-247
123
1
3
123
I²PAK
!-V
$
'
3
Table 1. Device summary
Order codes Marking Package Packaging
STB18NM60N 18NM60N D²PAK Tape and reel
STF18NM60N 18NM60N TO-220FP Tube
STI18NM60N 18NM60N I²PAK Tube
STP18NM60N 18NM60N TO-220 Tube
STW18NM60N 18NM60N TO-247 Tube
www.st.com
Contents STB/F/I/P/W18NM60N
2/18 Doc ID 15868 Rev 3
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
STB/F/I/P/W18NM60N Electrical ratings
Doc ID 15868 Rev 3 3/18
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter
Value
Unit
D²PAK,I²PAK
TO-220,TO-247 TO-220FP
VDS Drain-source voltage (VGS =0) 600 V
VGS Gate- source voltage ± 25
IDDrain current (continuous) at TC = 25 °C 13 13 (1)
1. Limited only by maximum temperature allowed
A
IDDrain current (continuous) at TC = 100 °C 8.2 8.2 (1) A
IDM (2)
2. Pulse width limited by safe operating area
Drain current (pulsed) 52 52 (1) A
PTOT Total dissipation at TC = 25 °C 110 30 W
IAR
Avalanche current, repetitive or not-repetitive
(pulse width limited by TJ max) 4.5 A
EAS
Single pulse avalanche energy
(starting TJ = 25 °C, ID = IAR, VDD = 50 V) 350 mJ
dv/dt(3)
3. ISD ≤ 13 A, di/dt ≤ 400 A/µs, peak VDS ≤ V(BR)DSS
Peak diode recovery voltage slope 15 V/ns
VISO
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t=1 s;TC=25 °C)
2500 V
TJ
Tstg
Operating junction temperature
Storage temperature -55 to 150 °C
Table 3. Thermal data
Symbol Parameter D²PAK I²PAK TO-220 TO-247 TO-220FP Unit
Rthj-case
Thermal resistance junction-case
max 1.14 4.17 °C/W
Rthj-amb
Thermal resistance junction-amb
max 62.5 50 62.5 °C/W
Tl
Maximum lead temperature for
soldering purpose 300 °C
Electrical characteristics STB/F/I/P/W18NM60N
4/18 Doc ID 15868 Rev 3
2 Electrical characteristics
(TCASE=25 °C unless otherwise specified)
Table 4. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V(BR)DSS
Drain-source breakdown
voltage ID = 1 mA, VGS= 0 600 V
IDSS
Zero gate voltage drain
current (VGS = 0)
VDS = Max rating
VDS = Max rating,TJ=125 °C
1
10
µA
µA
IGSS
Gate body leakage current
(VDS = 0) VGS = ±25 V; VDS=0 100 nA
VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA 2 3 4 V
RDS(on)
Static drain-source on
resistance VGS= 10 V, ID=6.5 A 0.260 0.285 Ω
Table 5. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS = 50 V, f =1 MHz,
VGS = 0 -
1000
60
3
-
pF
pF
pF
Coss eq.(1)
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDS.
Output equivalent
capacitance VDS = 0, to 480 V, VGS=0 - 225 - pF
RgIntrinsic resistance f=1 MHz open drain - 3.5 - Ω
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 480 V, ID = 13 A
VGS = 10 V
(see Figure 18)
-
35
6
20
-
nC
nC
nC
Table 6. Switching times
Symbol Parameter Test conditions Min. Typ. Max. Unit
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD = 300 V, ID = 13 A,
RG = 4.7 Ω, VGS = 10 V
(see Figure 17)
-
20
22
50
40
-
ns
ns
ns
ns
STB/F/I/P/W18NM60N Electrical characteristics
Doc ID 15868 Rev 3 5/18
Table 7. Source drain diode
Symbol Parameter Test conditions Min. Typ. Max. Unit
ISD
ISDM (1)
1. Pulse width limited by safe operating area
Source-drain current
Source-drain current (pulsed) -13
52
A
A
VSD(2)
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Forward on voltage ISD = 13 A, VGS=0 - 1.6 V
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD =13 A, di/dt =100 A/µs,
VDD = 60 V
(see Figure 19)
-
300
4.0
25
ns
µC
A
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
VDD = 60 V
di/dt =100 A/µs, ISD = 13 A
Tj = 150°C (see Figure 19)
-
360
4.5
25
ns
µC
A
Electrical characteristics STB/F/I/P/W18NM60N
6/18 Doc ID 15868 Rev 3
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for TO-220,
D²PAK, I²PAK
Figure 3. Thermal impedance for TO-220,
D²PAK , I ²PA K
Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP
Figure 6. Safe operating area for TO-247 Figure 7. Thermal impedance for TO-247
I
D
10
1
0.1
0.1 1100 V
DS
(V)
10
(A)
Operation in this area is
Limited by max R
DS(on)
10µs
100µs
1ms
10ms
Tj=150°C
Tc=25°C
Sinlge
pulse
AM05525v1
I
D
10
1
0.1
0.1 1100 V
DS
(V)
10
(A)
Operation in this area is
Limited by max R
DS(on)
10µs
100µs
1ms
10ms
Tj=150°C
Tc=25°C
Sinlge
pulse
0.01
AM05526v1
I
D
10
1
0.10.1 1100 V
DS
(V)
10
(A)
Operation in this area is
Limited by max R
DS(on)
10µs
100µs
1ms
10ms
Tj=150°C
Tc=25°C
Sinlge
pulse
AM05527v1
STB/F/I/P/W18NM60N Electrical characteristics
Doc ID 15868 Rev 3 7/18
Figure 8. Output characteristics Figure 9. Transfer characteristics
Figure 10. Static drain-source on resistance Figure 11. Gate charge vs gate-source voltage
Figure 12. Capacitance variations Figure 13. Output capacitance stored energy
I
D
15
10
5
0010 V
DS
(V)
20
(A)
515
20
25
5V
6V
4V
V
GS
=10V
AM05528v1
I
D
15
10
5
004V
GS
(V)
8
(A)
2610
20
25
V
DS
=15V
AM05529v1
R
DS(on)
0.23
0.22
0.21
0.2004I
D
(A)
(Ω)
26
0.24
0.25
0.26
0.27
810 12
0.28
AM05530v1
V
GS
6
4
2
0010 Q
g
(nC)
(V)
40
8
20 30
10
V
DD
=480V
I
D
=13A
12
300
200
100
0
400
500
V
DS
V
GS
AM05531v1
C
1000
100
10
1
0.1 10 V
DS
(V)
(pF)
1100
Ciss
Coss
Crss
AM05532v1
E
oss
3
2
1
0
0100 V
DS
(V)
(µJ)
400
4
200 300
5
6
500 600
7
AM05533v1
Electrical characteristics STB/F/I/P/W18NM60N
8/18 Doc ID 15868 Rev 3
Figure 14. Normalized gate threshold voltage
vs temperature
Figure 15. Normalized on resistance vs
temperature
Figure 16. Normalized BVDSS vs temperature
V
GS(th)
1.00
0.90
0.80
0.70
-50 0T
J
(°C)
(norm)
-25
1.10
75
25 50 100
AM05534v1
R
DS(on)
1.9
1.1
0.9
0.5
-50 0T
J
(°C)
(norm)
-25 75
25 50 100
0.7
1.7
1.5
1.3
2.1
AM05535v1
BV
DSS
-50 0T
J
(°C)
(norm)
-25 75
25 50 100
0.93
0.95
0.97
0.99
1.01
1.03
1.05
1.07
AM05536v1
STB/F/I/P/W18NM60N Test circuits
Doc ID 15868 Rev 3 9/18
3 Test circuits
Figure 17. Switching times test circuit for
resistive load
Figure 18. Gate charge test circuit
Figure 19. Test circuit for inductive load
switching and diode recovery times
Figure 20. Unclamped inductive load test
circuit
Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
AM01468v1
VGS
PW
VD
RG
RL
D.U.T.
2200
μF
3.3
μFVDD
AM01469v1
VDD
47kΩ1kΩ
47kΩ
2.7kΩ
1kΩ
12V
Vi=20V=VGMAX
2200
μF
PW
IG=CONST
100Ω
100nF
D.U.T.
VG
AM01470v1
A
D
D.U.T.
S
B
G
25 Ω
AA
BB
RG
G
FAST
DIODE
D
S
L=100μH
μF
3.31000
μFVDD
AM01471v1
Vi
Pw
VD
ID
D.U.T.
L
2200
μF
3.3
μFVDD
AM01472v1
V(BR)DSS
VDD
VDD
VD
IDM
ID
AM01473v1
VDS
ton
tdon tdoff
toff
tf
tr
90%
10%
10%
0
0
90%
90%
10%
VGS
Package mechanical data STB/F/I/P/W18NM60N
10/18 Doc ID 15868 Rev 3
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.
STB/F/I/P/W18NM60N Package mechanical data
Doc ID 15868 Rev 3 11/18
Table 8. TO-220FP mechanical data
Dim.
mm
Min. Typ. Max.
A4.4 4.6
B2.5 2.7
D 2.5 2.75
E0.45 0.7
F0.75 1
F1 1.15 1.70
F2 1.15 1.70
G4.95 5.2
G1 2.4 2.7
H 10 10.4
L2 16
L3 28.6 30.6
L4 9.8 10.6
L5 2.9 3.6
L6 15.9 16.4
L7 9 9.3
Dia 3 3.2
Figure 23. TO-220FP drawing mechanical data
Package mechanical data STB/F/I/P/W18NM60N
12/18 Doc ID 15868 Rev 3
DPAK (TO-263) mechanical data
Dim hcnimm
Min Typ Max Min Typ Max
181.0371.006.404.4A
900.0100.032.030.01A
730.0720.039.007.0b
760.0540.007.141.12b
420.0710.006.05
4.0c
350.0840.063.132.12c
863.0253.053.959.8D
592.005.71D
904.0493.004.0101E
433.005.81E
1.045.2e
802.0291.0
82.588.41e
426.0095.058.5151H
601.0990.096.294.21J
011.0090.097.292.2L
550.050.004.172.11L
960.0150.057.10
3.12L
610.04.0R
°8°0°8°02V
0079457_M
STB/F/I/P/W18NM60N Package mechanical data
Doc ID 15868 Rev 3 13/18
TO-220 type A mechanical data
Dim mm
Min Typ Max
A 4.40 4.60
b0.61 0.88
b1 1.14 1.70
c0.480.70
D 15.25 15.75
D1 1.27
E10 10.40
e 2.40 2.70
e1 4.95 5.15
F1.231.32
H1 6.20 6.60
J1 2.40 2.72
L1314
L1 3.50 3.93
L20 16.40
L3028.90
∅P3.75 3.85
Q 2.65 2.95
0015988_Rev_S
Package mechanical data STB/F/I/P/W18NM60N
14/18 Doc ID 15868 Rev 3
Dim. mm.
Min. Typ. Max.
A4.855.15
A1 2.20 2.60
b1.0 1.40
b1 2.0 2.40
b23.0 3.40
c0.40 0.80
D19.85 20.15
E 15.45 15.75
e5.45
L 14.20 14.80
L1 3.70 4.30
L2 18.50
øP 3.55 3.65
øR 4.50 5.50
S5.50
TO-247 mechanical data
STB/F/I/P/W18NM60N Package mechanical data
Doc ID 15868 Rev 3 15/18
I²PAK (TO-262) mechanical data
Dim mm inch
Min Typ Max Min Typ Max
A 4.40 4.60 0.1730.181
A1 2.40 2.72 0.094 0.107
b0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c 0.49 0.70 0.019 0.027
c2 1.231.320.0480.052
D8.95 9.350.352 0.368
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
E 10 10.40 0.3930.410
L1314 0.511 0.551
L1 3.50 3.930.137 0.154
L2 1.27 1.40 0.050 0.055
Packaging mechanical data STB/F/I/P/W18NM60N
16/18 Doc ID 15868 Rev 3
5 Packaging mechanical data
TAPE AND REEL SHIPMENT
D2PAK FOOTPRINT
DIM. mm inch
MIN. MAX. MIN. MAX.
A330 12.992
B1.5 0.059
C12.813.2 0.504 0.520
D20.2 0795
G 24.4 26.4 0.960 1.039
N100 3.937
T30.4 1.197
BASE QTY BULK QTY
1000 1000
REEL MECHANICAL DATA
DIM. mm inch
MIN. MAX. MIN. MAX.
A0 10.5 10.7 0.4130.421
B0 15.7 15.9 0.6180.626
D 1.5 1.6 0.059 0.063
D1 1.59 1.61 0.062 0.063
E1.651.85 0.065 0.073
F11.4 11.6 0.449 0.456
K0 4.85.0 0.189 0.197
P0 3.9 4.1 0.1530.161
P1 11.9 12.1 0.4680.476
P2 1.9 2.1 0.075 0.082
R 50 1.574
T0.250.35 0.00980.0137
W 23.7 24.30.933 0.956
TAPE MECHANICAL DATA
STB/F/I/P/W18NM60N Revision history
Doc ID 15868 Rev 3 17/18
6 Revision history
Table 9. Document revision history
Date Revision Changes
15-Jun-2009 1 First release
11-Nov-2009 2
– Added RDS(on) typical value
– Added new package, mechanical data: I²PAK
– Document status promoted from preliminary data to
datasheet
06-Oct-2010 3 Inserted new value in Ta b l e 5 .
STB/F/I/P/W18NM60N
18/18 Doc ID 15868 Rev 3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com