Revised May 2004 NC7SZ19 TinyLogic UHS 1-of-2 Decoder/Demultiplexer General Description Features The NC7SZ19 is a 1-of-2 decoder with a common output enable. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range. Space saving SC70 6-lead surface mount package Ultra small MicroPak leadless package Ultra High Speed: tPD 2.7 ns Typ into 50 pF at 5V VCC Broad VCC Operating Range; 1.65V to 5.5V Power down high impedance inputs/outputs Overvoltage tolerant inputs facilitate 5V to 3V translation Patented noise/EMI reduction circuitry implemented Ordering Code: Order Package Product Code Number Number Top Mark NC7SZ19P6X MAA06A Z19 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7SZ19L6X MAC06A B4 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Supplied As Connection Diagrams Pin Descriptions Pin Names Description E Decoder Output Enable/ Demultiplexer Data A Decoder Address/Demultiplexer Select Y0, Y1 Outputs Pin Assignments for SC70 Function Table Input Output A E Y0 = A + E Y1 = A + E (Top View) Pin One Orientation Diagram L L L H H L H L X H H H H = HIGH Logic Level L = LOW Logic Level X = Don't Care AAA = Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS500323 www.fairchildsemi.com NC7SZ19 TinyLogic UHS 1-of-2 Decoder/Demultiplexer September 1999 NC7SZ19 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC ) -0.5V to +7.0V DC Input Voltage (VIN) -0.5V to +7.0V DC Output Voltage (VOUT) -0.5V to +7.0V Recommended Operating Conditions Supply Voltage Operating (VCC) DC Input Diode Current (IIK) @ VIN -0.5V Input Rise and Fall Time (tr, tf) 50 mA 100 mA -65C to +150 C Storage Temperature Range (TSTG) 150 C Junction Temperature under Bias (TJ) 0 ns/V to 20 ns/V VCC @ 3.3V 0.3V 0 ns/V to 10 ns/V VCC @ 5.0V 0.5V 0 ns/V to 5 ns/V 350C/W Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. 260 C (Soldering, 10 seconds) VCC @ 1.8V 0.15V, 2.5V 0.2V Thermal Resistance (JA) Junction Lead Temperature (TL) Power Dissipation (PD) @ +85C 0V to VCC -40C to +85C Operating Temperature (TA) -50 mA DC VCC or Ground Current (ICC/IGND) 0V to 5.5V Output Voltage (VOUT) DC Output Diode Current (IOK) @ VIN -0.5V 1.5V to 5.5V Input Voltage (VIN) -50 mA DC Output Current (IOUT) 1.65V to 5.5V Supply Voltage Data Retention (VCC) 180 mW DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VOH VOL TA = +25C VCC Typ TA = -40C to +85C (V) Min Max Min 1.65 0.75 VCC 0.75 VCC 2.3 - 5.5 0.7 VCC 0.7 VCC 1.65 0.25 VCC 0.25 VCC 0.3 VCC 0.3 VCC 1.65 1.55 1.65 1.55 Output Voltage 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com Units Conditions V 2.3 - 5.5 HIGH Level LOW Level Max V IOH = -100 A VIN = VIH 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 IOH = -8 mA 3.0 2.4 2.80 2.4 IOH = -16 mA 3.0 2.3 3.68 2.3 IOH = -24 mA 4.5 3.8 4.20 3.8 1.65 0.0 V or VIL IOH = -4 mA IOH = -32 mA 0.10 0.10 2.3 0.0 0.10 0.10 3.0 0.0 0.10 0.10 IOL = 100 A VIN = VIL 4.5 0.0 0.10 0.10 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 IOL = 8 mA V or VIH IOL = 4 mA 3.0 0.15 0.4 0.4 IOL = 16 mA 3.0 0.22 0.55 0.55 IOL = 24 mA 4.5 0.22 0.55 0.55 0.1 1 A VIN = 5.5V, GND 0 to 5.5 IOL = 32 mA 0.0 1 10 A VIN or VOUT = 5.5V 1.65 to 5.5 1 10 A VIN = 5.5V, GND 2 Symbol Parameter TA = +25C VCC TA = -40C to +85C (V) Min Typ Max Min Max tPLH Propagation Delay 1.8 0.15 2.5 5.9 10.5 2.5 11.0 tPHL A or E to Output 2.5 0.2 1.2 3.5 6.0 1.2 6.4 3.3 0.3 0.8 2.7 4.1 0.8 4.5 3.5 5.0 0.5 0.5 2.1 3.2 0.5 tPLH Propagation Delay 3.3 0.3 1.2 3.2 5.1 1.2 5.4 tPHL A or E to Output 5.0 0.5 0.8 2.7 4.0 0.8 4.3 CIN Input Capacitance 0 2.3 CPD Power Dissipation 3.3 10.5 Capacitance 5.0 12.8 Units ns ns Conditions CL = 15 pF, RL = 1 M CL = 50 pF, Figure Number Figures 1, 3 RL = 500 Figures 1, 3 (Note 2) Figure 2 pF pF Note 2: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8 ns PRR = 10 MHz; Duty Cycle = 50% E Input = GND FIGURE 2. ICCD Test Circuit FIGURE 3. AC Waveforms 3 www.fairchildsemi.com NC7SZ19 AC Electrical Characteristics NC7SZ19 Tape and Reel Specification TAPE FORMAT for SC70 Package Designator P6X Tape Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-6 Tape Size 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) DIM F DIM Ko 0.138 0.004 0.053 0.004 (3.5 0.10) 4 (1.35 0.10) DIM P1 DIM W 0.157 0.315 0.004 (4) (8 0.1) TAPE FORMAT for MicroPak Package (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator L6X Cover Tape Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/-0.000 0.567 W1 + 0.078/-0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/-0.00) (14.40) (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZ19 Tape and Reel Specification NC7SZ19 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 6 NC7SZ19 TinyLogic UHS 1-of-2 Decoder/Demultiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com