Versatile 5-Megapixel PureCel® Sensor with
High Dynamic Range for a Wide Range of
Commercial Security and Consumer Applications
OS05A10 5-megapixel product brief
lead free
available in
a lead-free
package
OmniVision's low-power OS05A10 is a 5-megapixel
image sensor that brings crisp 1080p high definition,
2K, and 5-megapixel video to a wide range of
commercial security and consumer applications,
including 360-degree full-view cameras. Built on
OmniVision's advanced PureCel® pixel architecture, the
OS05A10 utilizes backside illumination (BSI)
technology to deliver enhanced low-light sensitivity and
wide field of view (FOV).
Available in the popular 1/2.7-inch optical format, the
OS05A10 enables video applications in widely used 4:3
and 16:9 aspect ratios. The sensor can capture 1080p
full high definition slow-motion video at 120 frames per
second (fps) and 2688 x 1944 resolution at 60 fps.
Additionally, the OS05A10 features a 11-degree chief
ray angle (CRA) and a dual-exposure staggered high
dynamic range (HDR) mode to enable excellent scene
reproduction in difficult high-contrast lighting
conditions.
The OS05A10 is compatible with MIPI and LVDS
interfaces and comes in a chip scale package (CSP) of
6.6 mm x 5.9 mm.
Find out more at www.ovt.com.
¬
¬
¬Security Cameras
Action Cameras
High Resolution Consumer Cameras
Applications
¬
¬
¬
¬
¬
¬
2 µm x 2 µm pixel
optical size of 1/2.7"
programmable controls for:
- frame rate
- mirror and flip
- cropping
- windowing
supports output formats:
- 12-/10-bit RAW RGB
supports image sizes:
- 5MP (2688x1944)
- 1080p (1920x1080)
- 720p (1280x720)
supports 2x2 binning
standard serial SCCB interface
12/10-bit ADC
up to 4-lane MIPI/LVDS serial output
interface (supports maximum speed
up to 1500 Mbps/lane)
2-exposure staggered HDR support
programmable I/O drive capability
light sensing mode (LSM)
PLL with SCC support
support for frame sync
¬
¬
¬
¬
¬
¬
¬
¬
Product Features ¬OS05A10-H73A-1B
(color, lead-free) 73-pin CSP
Ordering Information
¬
¬
¬
¬
¬
¬
¬
active array size: 2688 x 1944
power supply:
- core: 1.2V
- analog: 2.8V
- I/O: 1.8V
power requirements:
- active: 210 mW
- standby: 2 mA
- XSHUTDOWN: 2 µA
temperature range:
- operating: -30°C to +85°C junction
temperature
- stable image: 0°C to +60°C junction
temperature
output formats: 10/12-bit RGB RAW
lens size: 1/2.7"
input clock frequency: 6 ~ 27 MHz
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
¬
lens chief ray angle: 11° linear
max S/N ratio: 39 dB
dynamic range: 74 dB @ 16x gain
maximum image transfer rate:
- 2688x1944: 60 fps
- 2688x1520: 60 fps
sensitivity: 13,000 e-/Lux-sec
scan mode: progressive
maximum exposure interval: VTS - 8
minimum exposure interval: 4 tROW
pixel size: 2.0 µm x 2.0 µm
image area: 5434.56 µm x 3948.05 µm
package dimensions:
- CSP: 6628 µm x 5925 µm
Product Specifications
Version 1.2, October, 2018
OmniVision reserves the right to make changes to their products or to discontinue any product
or service without further notice. OmniVision, the OmniVision logo and PureCel are registered
trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their
respective owners.
4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
OS05A10
Functional Block Diagram
OS05A10
image sensor core image
sensor
processor
image
interface
column
sample/hold
row select
PLLs PLL
control register bank
SCCB interface
timing generator and system control logic
gain
control
XVCLK
TM
XSHUTDOWN2
XSHUTDOWN
PWDNB
GPIO[3:0]
STROBE
ILPWM
VSYNC
SID
SCL
SDA
MCP/N
MDP/N[3:0]
temperature
sensor
image
array AMP
ISP
12-bit
ADC
FIFO
MIPI/LVDS
